جيجابايت/ت 36399 أنابيب الصلب بالألمنيوم
- وصف
وصف
جيجابايت/ت 36399-2018 is China’s national standard for continuously hot-dip aluminium-silicon alloy coated steel sheet and strip. It was issued on June 7, 2018 and implemented on March 1, 2019, and it is currently listed as an effective standard by China’s National Standards Information Public Service Platform. The standard covers terminology, classification, تعيين, ordering, أبعاد, technical requirements, testing, تقتيش, التعبئة والتغليف, marking, and quality certificates for continuously coated steel sheet and strip. :contentReference[غنم:0]{الفهرس=0}
For buyers searching for an أنابيب الصلب بالألمنيوم under this standard, one distinction is essential: جيجابايت/ت 36399 directly applies to continuously hot-dip coated sheet and strip, not to finished pipe as a standalone product standard. A tube can be manufactured from material supplied to GB/T 36399, but the tube’s dimensions, لحام, تشكيل, and finished-product requirements should be specified separately. :contentReference[غنم:1]{index=1}
1. What GB/T 36399 Covers
The official standard title is Continuously Hot-dip Aluminium-silicon Alloy Coated Steel Sheet and Strip. Its stated application fields include automobiles, الأجهزة المنزلية, والبناء. The standard covers continuously coated products from 0.30 mm to 3.0 مم in thickness. :contentReference[غنم:2]{index=2}
| غرض | جيجابايت/ت 36399-2018 | Procurement Meaning |
|---|---|---|
| Product form | Continuously hot-dip coated steel sheet and strip | Not a finished-pipe dimensional standard |
| Coating system | Aluminium-silicon alloy | Specify coating designation and coating weight |
| Nominal thickness range | 0.30-3.0 ملم | Confirm whether the tube-forming route fits the selected thickness |
| Application fields | السيارات, الأجهزة المنزلية, architecture | Final tube application may require additional specifications |
| Inspection scope | Dimensions, appearance, mechanical properties, coating and tests | Request traceable quality documentation |
The standard also states that hot-dip aluminium-silicon coated steel sheet and strip may be referred to as hot-dip aluminium steel sheet and strip. :contentReference[غنم:3]{index=3}
2. What the Aluminium-Silicon Coating Actually Means
جيجابايت/ت 36399 defines the hot-dip aluminium-silicon alloy coating as a coating produced by immersing pretreated steel strip into a molten plating solution. The standard specifies a silicon content of 5%-11% in the bath, with impurities other than iron limited to no more than 1% and aluminium making up the balance. :contentReference[غنم:4]{index=4}
This is why the designation should not be confused with an aluminium-only coating. The silicon addition is part of the defined aluminium-silicon coating system, and the standard separately addresses the alloy coating and the underlying steel substrate.
Procurement note: “Aluminized steel” is a useful commercial description, but a purchase order should identify the applicable standard, steel designation, coating designation or coating weight, أبعاد, surface treatment, and inspection requirements rather than relying on the generic product name alone.
3. جيجابايت/ت 36399 Grade and Designation System
One of the most useful features of GB/T 36399 is its designation structure. The standard allows the substrate designation to communicate the forming or structural category and then adds +مثل to identify the aluminium-silicon coating type. :contentReference[غنم:5]{الفهرس=5}
For cold-forming products, the standard describes a designation structure using codes such as DX51 through DX55. The standard also permits structural designations such as S250GD, S280GD and S350GD, while hot-stamping products can be identified through chemical-composition designations such as 22MnB5 followed by +AS. :contentReference[غنم:6]{index=6}
| Example Designation | Basic Meaning | Typical Procurement Context |
|---|---|---|
| DX51D+AS | Cold-forming steel with aluminium-silicon coating | General forming applications |
| DX53D+AS | Cold-forming grade with aluminium-silicon coating | Higher forming requirements |
| S350GD+AS | Structural steel with minimum specified yield strength of 350 MPa and AS coating | Structural applications |
| 22MnB5+AS | Chemical-composition designation with AS coating | Hot-stamping applications |
These examples come directly from the designation logic described in the standard. In particular, “D” identifies the hot-dipping process in the designation structure, while “AS” identifies the aluminium-silicon coating type. :contentReference[غنم:7]{index=7}
4. GB/T Coating Designation vs AS Commercial Terminology
International procurement often creates confusion because buyers may use terms such as AS60, AS80, AS120 or AS150 when discussing aluminized steel. These AS numbers are commonly used commercially to describe coating mass classes, while GB/T 36399 uses a structured order and marking system in which the coating type is identified by مثل and the coating weight is specified separately.
على سبيل المثال, the standard’s ordering requirements explicitly call for the coating weight as a separate item. Its marking example identifies DX51D+AS together with a coating-weight code of 150. :contentReference[غنم:8]{index=8}
| Specification Language | What It Communicates | How to Handle in an Order |
|---|---|---|
| +مثل | Aluminium-silicon coating type | Include with the substrate designation |
| Coating weight code | Specified coating-weight requirement | State the required value explicitly |
| AS60 / AS80 / AS120 etc. | Common commercial shorthand for coating-mass levels | Confirm the exact mass definition and test basis before treating it as equivalent to another standard |
This distinction is particularly important for export orders. A buyer should not assume that an AS number used in a quotation automatically represents an identical coating requirement under JIS, في, أستم, or GB standards. The standard, coating type, coating mass, طريقة القياس, and whether the value is total both-side coating or another basis should be stated clearly.
5. Mechanical and Process Requirements
جيجابايت/ت 36399 is not simply a coating specification. It also establishes requirements for dimensions, appearance, mechanical properties, coating performance, test methods, inspection rules, التعبئة والتغليف, marking, and quality certification. The standard references tensile testing, bend testing, plastic strain ratio testing, tensile strain-hardening exponent testing, التحمل الأبعاد, and coating-weight measurement methods. :contentReference[غنم:9]{index=9}
For buyers intending to form the material into pipe or tube, the substrate grade therefore matters. A general forming grade and a higher-formability grade should not be treated as interchangeable simply because both carry an AS coating.
Check yield strength, tensile strength and elongation against the exact substrate designation and thickness.
الانحناء, إحراق, expansion and roll forming should be evaluated against the selected substrate grade.
Confirm coating weight, coating condition and the applicable measurement method rather than relying on a commercial shorthand alone.
6. What the Standard Requires in an Order
جيجابايت/ت 36399 provides a particularly useful ordering framework. The contract or purchase order should include the standard number, product name, تعيين, coating weight, جودة السطح, surface treatment, specification and dimensional accuracy, flatness accuracy, coil ID and maximum coil weight, total weight, packaging method, and any special requirements. :contentReference[غنم:10]{index=10}
| Purchase-Order Field | Example of What to Define |
|---|---|
| معيار | جيجابايت/ت 36399-2018 |
| Steel designation | DX51D+AS, DX53D+AS, S350GD+AS, إلخ. |
| طلاء | Required coating type and coating weight |
| Dimensions | سماكة, width, tolerance and flatness |
| سطح | Surface-quality grade and surface treatment |
| Coil configuration | بطاقة تعريف, maximum coil weight and winding requirements |
| Documents | Quality certificate and agreed inspection records |
7. جيجابايت/ت 36399 Material Used for Aluminized Steel Pipe
When a coil or sheet supplied to GB/T 36399 is used to manufacture tube, the material standard and the finished tube specification should be kept separate. The coil may be ordered as DX51D+AS or another appropriate designation, while the finished tube needs its own OD, سمك الجدار, طول, welding or forming process, coating condition, dimensional tolerance and inspection requirements.
This distinction prevents a common procurement error: writing “GB/T 36399 aluminized steel pipe” without defining whether GB/T 36399 applies to the raw material, the finished tube, أو كليهما. Because the national standard’s stated scope is sheet and strip, the purchase documentation should make that relationship explicit. :contentReference[غنم:11]{index=11}
8. غيغابايت, JIS and EN: How to Compare Without Creating False Equivalents
International buyers frequently encounter JIS G 3314, في 10346 and GB/T 36399 in the same sourcing project. These standards describe related families of continuously coated steel products, but their designation systems, coating classifications, testing requirements and grade definitions are not automatically identical.
| Standard Family | Product Logic | Comparison Approach |
|---|---|---|
| جيجابايت/ت 36399 | Continuously hot-dip aluminium-silicon coated sheet and strip | Compare substrate designation, +AS coating, coating weight and test requirements |
| JIS G 3314 | Hot-dip aluminium-coated steel sheet and strip with JIS grade classifications | Check grade, coating classification and mechanical requirements individually |
| في 10346 | Continuously hot-dip coated flat steel products | Use the exact EN designation and coating designation rather than assuming direct grade equivalence |
A useful engineering comparison should therefore map درجة الركيزة + forming class + coating type + coating mass + mechanical properties + dimensional requirements. A database match or similar-looking designation alone is not sufficient for approving a substitution.
9. Export and Import Applications
For Chinese domestic procurement, specifying GB/T 36399 can provide a clear reference for material designation, coating weight, inspection and delivery documentation. For export projects, لكن, the buyer may need the material to satisfy an overseas standard, customer specification, or project-specific approval.
The most practical approach is to state the required standard first and then identify any acceptable alternative standards subject to technical approval. على سبيل المثال, a Chinese supplier can quote a GB/T 36399 material while an overseas buyer may request comparison against JIS or EN requirements. The supplier should then provide the actual chemical composition, mechanical results, coating data and test methods for engineering review rather than simply labeling the grades “equivalent.”
For export procurement: Ask for the exact standard edition, steel designation, coating weight, test method, surface treatment, أبعاد, certificate type and traceability information. This makes a GB-to-JIS or GB-to-EN comparison auditable instead of relying on commercial terminology.
10. Teda Ganghua Support for GB/T 36399 Tube Projects
Teda Ganghua can support projects where aluminized steel is purchased as coil or processed into tube according to the customer’s required substrate grade, مواصفات الطلاء, dimensions and forming route. For tube applications, the material selection can be reviewed together with OD, سمك الجدار, الانحناء, إحراق, expansion, welding and downstream fabrication requirements.
For buyers who need finished أنابيب الصلب بالألمنيوم, Teda Ganghua can coordinate the material and tube requirements as separate but traceable specifications. This is particularly useful when a Chinese GB/T material needs to be reviewed against an overseas customer standard before shipment.
A technically complete inquiry should include the requested GB/T designation, coating weight, أبعاد الأنبوب, متطلبات التشكيل, surface treatment, كمية, وثائق التفتيش, destination market and any required JIS, EN or ASTM comparison. This gives the supplier a clear basis for material selection and export documentation.
11. الأسئلة المتداولة
Does GB/T 36399 directly specify finished aluminized steel pipe?
لا. جيجابايت/ت 36399-2018 specifies continuously hot-dip aluminium-silicon alloy coated steel sheet and strip. A finished tube manufactured from this material requires additional tube-specific dimensional, تشكيل, welding and inspection requirements. :contentReference[غنم:12]{index=12}
What thickness does GB/T 36399 cover?
The stated scope covers continuously hot-dip aluminium-silicon alloy coated steel sheet and strip with thicknesses from 0.30 mm to 3.0 مم. :contentReference[غنم:13]{index=13}
What does +AS mean in a GB/T 36399 تعيين?
“AS” identifies the aluminium-silicon coating type in the designation. The coating weight is specified separately as part of the ordering and marking requirements. :contentReference[غنم:14]{index=14}
Is AS120 under GB/T 36399 automatically identical to AS120 under another standard?
لا. يجب التحقق من تسمية الطلاء ومصطلحات كتلة الطلاء وفقًا للمعايير الدقيقة, أساس القياس ومواصفات المنتج. والاختصارات التجارية المشابهة لا تشكل في حد ذاتها تكافؤًا تقنيًا.
يمكن GB/T 36399 يتم تصدير المواد لإنتاج الأنابيب?
نعم, شريطة أن ترضي المادة والأنبوب النهائي العميل المناسب, سوق الوجهة والمتطلبات التعاقدية. لمشروع التصدير, وينبغي مقارنة شهادة المواد GB/T بالمعيار الخارجي المطلوب بدلاً من افتراض التكافؤ التلقائي.

















