Astm A787 aluminisierte Stahlrohre
- Beschreibung
Beschreibung
ASTM A787 is the mechanical-tubing specification to know when aluminized steel tubing needs a defined resistance-welded construction, metallic coating, chemistry, Abmessungen, and mechanical performance. The current ASTM listing identifies A787/A787M-24 as the active edition. It covers electric-resistance-welded carbon-steel mechanical tubing in round, Quadrat, rechteckig, and special shapes, including tubing produced from aluminum-coated steel sheet. It is therefore a finished-tubing standard rather than simply a sheet specification.
Important distinction: A787 does not cover seamless aluminized mechanical tubing. Its scope is specifically electric-resistance-welded metallic-coated carbon steel mechanical tubing. If seamless mechanical tubing is required, a different seamless tubing specification must be selected and the coating requirement specified separately.
What Is ASTM A787 Tubing?
ASTM A787/A787M is titled Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing. The specification covers round, Quadrat, rechteckig, and special-shape tubing. It includes products made from aluminum-coated steel sheet as well as other metallic-coated steel sheet products.
The standard is designed around mechanical tubing, not electrical conduit or pressure pipe. That makes the specification particularly relevant to fabricated components where dimensional accuracy, mechanical properties, surface protection, Bildung, and appearance are more important than pressure containment.
Herstellung
Electric-resistance welded construction.
Material
Carbon-steel mechanical tubing with a specified metallic coating.
Shapes
Runden, Quadrat, rechteckig, and special shapes.
Anwendung
Mechanical, strukturell, Automobil, exhaust-related and general fabricated components.
Does A787 Cover Aluminum-Coated Steel?
Ja. A787 includes mechanical tubing produced from aluminum-coated carbon steel sheet. The same specification also covers other metallic-coated products, including galvanized, verzinkt, 55% aluminum-zinc alloy-coated, and zinc-aluminum-magnesium alloy-coated steel.
This makes A787 useful when the purchaser wants the coating and tube construction addressed in one mechanical-tubing specification. For aluminum-coated tubing, Jedoch, the coating designation still needs to be clearly stated in the purchase order.
| A787 coating route | Basic description | Typical reason for selection |
|---|---|---|
| Aluminiumbeschichtet | Carbon steel sheet coated with aluminum before tube forming | Corrosion and heat-related surface protection |
| Galvanized after welding | Tubing welded first and zinc-coated afterward | General zinc-based corrosion protection |
| Verzinkt / galvannealed sheet route | Produced from metallic-coated steel sheet | Corrosion protection and fabrication requirements |
| 55% aluminum-zinc alloy coated | Al-Zn alloy-coated steel feedstock | Different coating-performance balance |
| Zn-Al-Mg coated | Zinc-aluminum-magnesium coated feedstock | Alternative corrosion-protection system |
A787 Type, Beschichtung, and Grade Are Different Things
One of the easiest purchasing mistakes is to treat the words Typ, Beschichtung, Und grade as interchangeable. They identify different parts of the specification.
A787 provides various types and grades. The type identifies the tubing/coating construction, while the steel grade is associated with the required chemical composition. For tubing produced from precoated sheet, the coating designation is tied to the applicable sheet specification. The standard’s ordering information calls for the purchaser to identify the type, ASTM designation, coating designation, coating treatment, Anwendung, steel chemical requirements where applicable, Form, Abmessungen, and length.
| Purchase item | What it controls | Example of what buyer should state |
|---|---|---|
| A787/A787M | Tubing standard | Required edition and SI or inch-pound designation |
| Typ | Tubing/coating construction | Applicable A787 type/code |
| Coating designation | Coating requirement | Applicable A463 aluminum coating designation |
| Stahlsorte | Base-metal chemistry and properties | Required A787 grade or agreed steel chemistry |
| Dimensions | Finished-tube geometry | OD × WT, ID × WT, or square/rectangular dimensions |
A787 and A463: Sheet Standard to Tube Standard
ASTM A463 and ASTM A787 are complementary rather than competing specifications. A463 covers aluminum-coated steel sheet. A787 covers electric-resistance-welded metallic-coated carbon steel mechanical tubing that can be produced from aluminum-coated sheet. A787 specifically references A463/A463M for the coating designation of aluminum-coated sheet used as precoated feedstock.
A463/A463M
Aluminum-coated steel sheet
Schlitzen + Bildung
Coated strip becomes tube profile
A787/A787M
Finished ERW mechanical tubing
This relationship is particularly important when a buyer sees both standards on a material certificate. The A463 reference identifies the aluminum-coated sheet used as feedstock, while A787 defines the finished mechanical-tubing requirements.
Does ASTM A787 Cover Seamless Tubing?
NEIN. A787 is an electric-resistance-welded tubing specification. Its scope specifically describes ERW carbon-steel mechanical tubing. It should therefore not be used as a generic substitute for “aluminized mechanical tube” when the customer requires seamless construction.
For comparison, ASTM A519/A519M is a separate specification for seamless carbon and alloy steel mechanical tubing, including hot-finished and cold-finished seamless products. It is not the same construction route as A787.
Buyer check: If a supplier quotes “ASTM A787 seamless aluminized tubing,” request clarification. The A787 standard itself specifies electric-resistance-welded mechanical tubing, so “seamless” and “A787” do not describe the same manufacturing route.
A787 Mechanical and Chemical Requirements
A787 does more than define the coating. It also establishes requirements for the carbon-steel substrate, including chemical composition and product-analysis provisions, together with dimensional tolerances for the tubing. The standard states that the product is available in various grades based on chemical requirements.
For mechanical-tubing procurement, this means the coating should not be considered separately from the steel substrate. A tube can have the correct aluminum coating but still be unsuitable if the base-metal chemistry, Stärke, Abmessungen, forming condition, or intended fabrication does not match the project requirement.
| Requirement area | What to verify |
|---|---|
| Chemical composition | Kohlenstoff, Mangan, phosphorus, sulfur and other specified elements according to the ordered grade |
| Beschichtung | Applicable coating specification and designation |
| Wall thickness | Nominal/ordered thickness and applicable tolerance |
| Durchmesser | Outside diameter or maximum outside dimension and tolerance |
| Mechanical performance | Required grade and applicable mechanical-property requirements |
| Weld condition | ERW seam, flash condition and any special finishing requirement |
A787 Tube Sizes and Shapes
The A787 scope covers round, Quadrat, rechteckig, and special-shape mechanical tubing. The A787/A787M-20a scope lists outside diameters or maximum outside dimensions from 1/2 Zu 15 In. [12.7 Zu 380 mm] und Wandstärken ab 0.028 Zu 0.180 In. [0.70 Zu 4.60 mm]; other sizes can be ordered when the remaining requirements are met. The applicable current edition should always be confirmed for a production order.
| Tube shape | Dimensions normally specified | Common procurement concern |
|---|---|---|
| Runden | AUS, AUSWEIS, or WT combination | Diameter tolerance and weld flash |
| Quadrat | Outside dimension, WT, corner radius | Squareness and corner geometry |
| Rectangular | Outside dimensions, WT, corner radius | Dimension and corner tolerances |
| Special shape | Customer-defined profile | Drawing approval and forming consistency |
Where A787 Aluminized Tubing Is Used
The mechanical-tubing design of A787 makes it suitable for fabricated components rather than pressure-service piping. Aluminum-coated versions are particularly relevant where the steel needs a protective aluminum surface and the tube must be formed into a practical mechanical profile.
Exhaust-related components
Useful where aluminized steel is selected for heat and corrosion considerations, subject to the actual temperature cycle.
Structural tube
Runden, Quadrat, rectangular and special profiles can support frames and fabricated assemblies.
General engineering
Suitable for mechanical components where coated carbon-steel tubing provides the required balance of strength and surface protection.
Fabricated equipment
Can be specified for guards, supports, brackets and formed assemblies where the coating is part of the corrosion-control strategy.
A787 for Exhaust Applications: Check the Temperature First
Aluminized mechanical tubing is frequently considered for exhaust-related applications, but A787 compliance alone does not make a tube suitable for every exhaust location. The buyer should evaluate peak temperature, continuous temperature, Kondensatbelastung, Wandstärke, Biegen, weld position, and the selected aluminum coating system.
For a hot-end component, the coating type and thermal environment can be more important than simply selecting the A787 designation. For a cooler exhaust section, corrosion resistance and condensate exposure may become the dominant concerns.
Exhaust procurement formula: A787 + tube grade + aluminum coating designation + OD × WT + Länge + weld requirement + temperature profile + inspection requirement.
How to Write an A787 Purchase Order
A vague inquiry such as “ASTM A787 aluminized tube” leaves too many variables open. A better purchase description identifies the A787 type, Beschichtung, Stahlsorte, Geometrie, finish, und Anwendung.
Recommended procurement format
• ASTM A787/A787M: specify required edition
• Type/code: specify the applicable A787 tubing type
• Coating: aluminum-coated steel; state the applicable A463/A463M coating designation
• Steel grade: specify the required A787 grade/chemical requirement
• Shape: round, Quadrat, rechteckig, or special
• Dimensions: OD × WT, ID × WT, or profile dimensions
• Length: mill or definite cut length
• Flash condition: controlled or standard as required
• Surface condition: chemically treated, dry/oiled, or other agreed condition
• Application: exhaust, strukturell, mechanical, or other fabrication requirement
A787’s own ordering information calls for the type/code and description, ASTM specification designation, coating designation and type of coating, chemical treatment, surface condition, customer application, steel chemical requirements where applicable, Form, Abmessungen, and length.
Teda Ganghua Support for A787 Aluminized Tubing
For buyers sourcing coated mechanical tubing from China, Teda Ganghua can review the complete A787 requirement rather than quoting from the keyword alone. The inquiry can include tube shape, AUS, Wandstärke, Länge, aluminum coating designation, base-steel grade, Formgebungsanforderungen, Schweißzustand, Anwendungstemperatur, and inspection documents.
For sourcing and quotation, see ASTM A787 aluminized steel tubing. Providing the A787 type and required coating designation together helps the supplier distinguish the finished-tube standard from the A463 sheet coating requirement and prepare the correct material documentation.
ASTM A787 Quick Reference
| Question | A787 answer |
|---|---|
| Is it a tubing standard? | Ja, for metallic-coated carbon-steel mechanical tubing. |
| Is the tube welded? | Ja. The standard covers electric-resistance-welded tubing. |
| Does it include aluminum-coated tubing? | Ja, including tubing produced from aluminum-coated steel sheet. |
| Does it cover seamless tube? | NEIN. |
| What shapes are available? | Runden, Quadrat, rechteckig, and special shapes. |
| What does A463 do? | It provides the applicable aluminum-coated sheet coating requirements used as precoated feedstock. |
| What must the buyer specify? | Typ, coating designation, grade, Form, Abmessungen, Länge, treatment, surface condition, and application as applicable. |
FAQs About ASTM A787 Aluminized Steel Tubing
What is ASTM A787 used for?
ASTM A787/A787M is used for electric-resistance-welded metallic-coated carbon-steel mechanical tubing. It covers round, Quadrat, rechteckig, and special shapes and includes aluminum-coated steel tubing.
Does ASTM A787 cover aluminized steel pipe?
It covers aluminum-coated mechanical tubing, but it is not a general pressure-pipe standard. Its scope is ERW carbon-steel mechanical tubing. If the project requires pressure-containing pipe, a different ASTM pipe specification should be evaluated.
What is the relationship between A787 and A463?
A463 is the aluminum-coated steel sheet specification, while A787 is the finished ERW metallic-coated mechanical-tubing specification. For tubing made from precoated aluminum-coated sheet, A787 references the applicable A463/A463M coating designation.
Is ASTM A787 seamless?
NEIN. A787/A787M specifically covers electric-resistance-welded mechanical tubing. Seamless mechanical tubing belongs to other specifications such as ASTM A519/A519M when applicable.
How should I order A787 aluminum-coated tubing?
State the A787/A787M edition, applicable type/code, aluminum coating designation, Stahlsorte, tube shape, OD and wall thickness, Länge, surface condition, flash requirement, intended application, and inspection/documentation requirements. This gives the supplier a complete mechanical-tubing specification rather than only a material keyword.



















