GB/T 36399 Feuerverzinktes, silikonbeschichtetes Stahlrohr aus Aluminium

Beschreibung

GB/T 36399-2018 is a specification for continuously hot-dip aluminium-silicon alloy coated steel sheet and strip, not a standalone finished-tube standard. This distinction matters when purchasing or manufacturing hot-dip Al-Si coated steel tube: the coating substrate, coating weight, mechanical properties and flat-product tolerances can be controlled according to GB/T 36399, while tube outside diameter, Wandstärke, Länge, ovality and tube-forming tolerances should be defined by the applicable tube standard or by the purchase agreement. The current national standard was issued on June 7, 2018 and implemented on March 1, 2019.

Procurement note: If a quotation says “GB/T 36399 hot-dip aluminium silicon coated tube,” ask the supplier to identify beide the GB/T 36399-coated strip specification and the separate tube specification. This avoids treating a sheet-and-strip standard as though it directly defines finished pipe dimensions.

1. What GB/T 36399 Covers

GB/T 36399-2018 is officially titled Continuously Hot-dip Aluminum-silicon Alloy Coated Steel Sheet and Strip. Its scope covers continuously hot-dip Al-Si coated steel sheet and strip with a thickness of 0.30–3,0 mm, primarily for automotive, household-appliance and architectural applications. The standard covers classification, Bezeichnung, ordering information, Abmessungen, appearance, Gewicht, technical requirements, test methods, inspection rules, Verpackung, marking and quality certificates.

ArtikelGB/T 36399-2018 PositionTube Procurement Meaning
Product formSteel sheet and stripUsually the coated feedstock before tube forming
BeschichtungContinuous hot-dip Al-Si alloyDefines the coating system on the steel substrate
Covered thickness0.30–3,0 mmUseful for selecting strip wall-thickness stock
Tube ODNot a finished-tube dimension in this standardSpecify separately
Tube lengthNot a finished-tube requirementSpecify separately

2. Al-Si Coating: Continuous Hot-Dip Process

The coating defined by the standard is produced by continuously immersing pretreated steel strip into a molten Al-Si plating bath. The specified plating solution contains 5%–11% Silizium; excluding iron, impurity elements are limited to no more than 1%, with aluminium making up the balance.

Typical process control sequence

Steel strip → surface cleaning and pretreatment → annealing/activation → immersion in molten Al-Si bath → coating thickness control → cooling/solidification → optional skin-pass → surface treatment → inspection → slitting or cut-to-length.

For tube applications, the important point is that the coating is applied before tube forming when coated strip is used as the feedstock. Forming parameters therefore need to balance tube geometry with coating integrity. Excessive local deformation, sharp tooling or unsuitable forming radii can damage the coating even when the incoming strip has passed its coating-weight and appearance inspection.

3. Tube Wall Thickness, Outside Diameter and Length

A common specification mistake is to copy the 0.30–3,0 mm range from GB/T 36399 directly into a finished-tube specification. That range is the scope of the coated sheet and strip standard; it is not a complete tube wall-thickness range.

Tube RequirementHow to SpecifyInspection Focus
Outside diameterNominal OD + applicable tube toleranceMultiple circumferential points
Wall thicknessNominal WT + thickness toleranceEnd and body-wall measurements
LängeFixed length or random lengthSteel rule or calibrated length gauge
OvalityMaximum OD difference or percentageMaximum OD − minimum OD
StraightnessTube-standard or purchaser requirementStraightness gauge or specified measurement method

For procurement, the cleanest description is therefore: Substratqualität + GB/T 36399 Al-Si-Beschichtung + coating weight + tube OD × WT × length + tube dimensional tolerance + forming/welding requirements + Inspektionsunterlagen.

4. Dimensional Tolerance and Ovality Control

For the coated flat product, GB/T 36399 refers dimensional, Form, weight and allowable-deviation requirements to GB/T 25052-2010. Its order information also requires the purchaser and supplier to define specification and dimensional accuracy.

Once the coated strip becomes a tube, tube-forming variables become important. Strip width, longitudinal edge condition, forming-roll alignment, weld position and sizing all influence the final OD and ovality. For a round tube, a practical ovality calculation is:

Ovality (%) = (Maximum OD − Minimum OD) ÷ Nominal OD × 100

This calculation should not be confused with a universal GB/T 36399 Toleranz. The purchaser should state the permitted ovality together with the applicable tube standard or technical agreement.

5. Mechanische Eigenschaften: Ertrag, Tensile Strength and Elongation

GB/T 36399 uses designation systems that identify different substrate families. Zum Beispiel, DX53D+AS identifies a cold-forming-oriented grade, während S350GD+AS identifies a structural grade with a specified minimum yield-strength level of 350 MPA. The designation “+AS” identifies the hot-dip aluminium-silicon alloy coating.

Mechanical ItemWhy It Matters for TubeProcurement Check
StreckgrenzeControls onset of permanent deformationMatch grade to forming and service load
ZugfestigkeitIndicates ultimate tensile capacityVerify against MTC/test report
VerlängerungImportant for roll forming, bending and flaringSelect forming grade rather than only strength grade
r/n values where applicableUseful for demanding sheet formingSpecify when deep-forming behavior is critical

The standard references tensile testing under GB/T 228.1 and bend testing under GB/T 232, while sample location and preparation are covered through GB/T 2975.

6. Beschichtungsgewicht, Adhesion and Bending Performance

Coating weight is a separate procurement parameter from steel thickness. The standard’s ordering information specifically requires coating weight to be stated, and its marking example uses a coating-weight code such as 150. daher, a request for “Al-Si coated tube” without a coating-weight requirement leaves an important quality parameter undefined.

Coating ControlWhat to VerifyTube-Specific Concern
BeschichtungsgewichtSpecified coating code/value and test resultConfirm required coating on the final tube route
Coating adhesionBend/forming performance without unacceptable coating damageCheck after forming when required
OberflächenzustandBare spots, defects and appearanceInspect OD and weld/forming zones
Surface treatmentPassivation/oiling or agreed treatmentConsider storage and downstream welding

GB/T 36399 includes normative methods for measuring Al-Fe-Si alloy coating weight, including chemical removal methods and an X-ray fluorescence method. The XRF method determines coating weight from the fluorescent response of the coated surface against calibrated reference data.

7. Recommended Inspection Checklist

A production inspection plan for a hot-dip Al-Si coated tube should separate incoming coated strip inspection aus finished tube inspection. This is especially important because GB/T 36399 itself is written for sheet and strip.

Inspection StageRecommended ItemTypical Evidence
Raw materialGrad, chemistry, Dicke, widthMill test certificate
BeschichtungAl-Si coating weight and surface conditionCoating test report
MechanicalStreckgrenze, tensile strength, VerlängerungTensile test report
BildungBend/forming and coating adhesionBend test record
Finished tubeAUS, WT, Länge, ovality, straightnessDimensional inspection report
Weld/forming areaWeld appearance and local coating conditionVisual/production inspection record
Final deliveryQuantity, marking, packaging and documentsPacking list + quality certificate

8. Sampling and Test Frequency

Sampling should be linked to the applicable inspection lot and the relevant standard requirements rather than using a single universal sample count for every tube order. GB/T 36399 contains dedicated inspection rules and references GB/T 2975 for the location and preparation of mechanical-test samples.

For procurement, the purchase specification should therefore define whether tests are performed per coil, per production lot, per heat, or at another agreed frequency. For finished tubes, dimensional checks can be performed at the tube-production stage, while coating-weight and substrate mechanical tests can be traced back to the coated strip batch when the contractual quality system permits this arrangement.

9. Delivery Condition and Packaging

GB/T 36399 includes packaging, marking and quality-certificate requirements. Its order information also allows the purchaser to specify coil internal diameter, maximum coil weight, total weight, packaging method and other special requirements. If no special requirement is stated, the standard provides default delivery provisions for ordinary dimensions and accuracy, including a 610 mm coil internal diameter and the supplier’s packaging method.

For coils

Specify ID, maximum coil weight, surface treatment, coating weight, marking and moisture/handling protection.

For tubes

Specify bundle quantity, Rohrlänge, end protection, separators, wrapping, labels and traceability.

For export

Confirm packing suitable for container handling, Korrosionsschutz, lifting points and document matching.

10. How to Write a Complete Purchase Specification

A technically complete inquiry should avoid simply writing “GB/T 36399 hot-dip aluminium silicon coated tube.” A clearer request identifies the coating standard and the finished-tube requirements separately.

Recommended structure:
GB/T 36399-2018 Al-Si coated steel feedstock + Substratqualität + coating weight + nominal tube OD × wall thickness × length + tube dimensional tolerance + ovality limit + forming/welding requirement + surface treatment + inspection plan + MTC/quality certificate + packaging requirement.

This format gives the supplier enough information to quote the material, forming process and inspection scope without assuming that the sheet-and-strip standard automatically defines every finished-tube parameter.

11. Teda Ganghua Supply Support for Al-Si Coated Tubes

For projects that need a controlled combination of coated steel grade, tube dimensions and downstream fabrication, Teda Ganghua can organize the specification around the actual procurement route rather than treating the coating standard as the only requirement. The supply discussion can cover substrate selection, Beschichtungsanforderung, tube OD and wall thickness, cut length, Umformverfahren, Inspektionsunterlagen, packaging and export delivery.

For buyers comparing different Chinese and international specifications, the practical approach is to first lock the substrate grade and coating system, then verify mechanical properties and coating tests, and finally establish the finished-tube dimensional requirements. This makes the technical comparison more transparent when suppliers quote against different standards.

aluminierte Stahlrohre can be evaluated according to the required OD, Wandstärke, Länge, coating specification and inspection documentation for the application.

12. FAQs

Is GB/T 36399 a finished tube standard?

NEIN. GB/T 36399-2018 is a standard for continuously hot-dip aluminium-silicon alloy coated steel sheet and strip. It does not by itself define a complete finished-tube OD, wall-thickness, length or ovality specification.

What is the thickness range covered by GB/T 36399?

The standard applies to continuously hot-dip Al-Si coated steel sheet and strip with a thickness of 0.30–3,0 mm. A finished tube may require a separate tube specification for its wall-thickness tolerance and dimensional control.

What does “+AS” mean in a designation such as DX53D+AS?

“+AS” identifies the hot-dip aluminium-silicon alloy coating. The designation also identifies the substrate grade or grade family; for example, DX53D is associated with cold-forming use.

How is Al-Si coating weight tested?

GB/T 36399 provides normative coating-weight measurement methods based on chemical removal and an X-ray fluorescence method. The coating mass is determined from the measured coating-related mass change or calibrated XRF response.

Can a tube simply be certified as “GB/T 36399”?

For a finished tube, it is better to state the coated-strip standard together with the applicable tube standard or agreed tube requirements. This makes OD, Wandstärke, Länge, ovality, mechanical properties, coating performance and inspection responsibilities unambiguous.

Normenhinweis: GB/T 36399-2018 bleibt als aktueller nationaler empfohlener Standard aufgeführt. Ein nationales Revisionsprojekt, 20260882-T-605, befindet sich derzeit in der Ausarbeitung und soll GB/T ersetzen 36399-2018 zusammen mit GB/T 2518-2019. In Kaufverträgen sollte daher genau angegeben werden, auf welche Auflage sich berufen wird.

GB/T 36399 Aluminisiertes Stahlrohr

Astm A463 Jis G3314 En 10346 Aluminisiertes Stahlrohr