Feuerverzinktes aluminisiertes Stahlrohr

Beschreibung

Feuerverzinktes aluminisiertes Stahlrohr: Quality Indicators, Beschichtungsdicke & Inspection Methods

Hot dipped aluminized steel pipe is a corrosion- and heat-resistant steel product coated by immersing carbon steel into a molten aluminum or aluminum-silicon bath. Its performance is highly dependent on coating weight, adhesion quality, and metallurgical structure.

For industrial buyers, especially in automotive exhaust, Wärmeaustausch, and furnace systems, understanding coating grade and inspection methods is critical for ensuring long-term reliability.

1. Coating Weight Grades (AS80 / AS120 / AS150)

BeschichtungsgradBeschichtungsgewicht (g/m²)Typische Leistung
AS80~80 g/m²Light-duty corrosion protection, HVAC-Systeme
AS120~120 g/m²Standard automotive exhaust and industrial piping
AS150~150 g/m²Heavy-duty high-temperature and aggressive environments

Higher coating weight improves corrosion resistance but may slightly reduce formability in tight bending applications.

2. Key Quality Indicators for Buyers

IndicatorRequirement
Coating UniformityNo visible bare spots or uneven thickness
Adhesion StrengthNo peeling under bending or impact deformation
OberflächenzustandSmooth Al-Si layer with minimal pinholes or rough particles
HitzebeständigkeitStable performance at 600–800°C operating conditions

A consistent coating layer is essential for long-term durability in thermal cycling environments.

3. Beschichtungsdicke & Testmethoden

Test MethodZweck
Magnetic Thickness GaugeNon-destructive measurement of coating thickness
Metallographic AnalysisCross-section observation of coating layers and diffusion zone
Weight Method (Gravimetric)Determines coating mass per unit area (AS grade verification)
Salt Spray TestAccelerated corrosion resistance evaluation

These methods ensure compliance with industrial and automotive quality standards.

4. Mechanical & Forming Performance Tests

Test TypeEvaluation Purpose
Bending TestEvaluates coating adhesion under deformation (no cracking or peeling)
Flanging TestAssesses edge formability for exhaust system fabrication
Impact TestChecks coating integrity under mechanical stress

Good aluminized pipe should maintain coating integrity even after severe forming operations.

5. Common Defects in Poor-Quality Products

DefectRisk
PinholesLocal corrosion initiation points
Uneven coating thicknessReduced lifespan in weak zones
Peeling or flakingLoss of thermal and corrosion protection
Brittle intermetallic layerCracking during bending or installation

6. Application Overview

IndustrieAnwendung
AutomobilAuspuffrohre, Schalldämpfer, catalytic systems
Industrielle HeizungFurnace and high-temperature gas pipelines
HVAC-SystemeVentilation and thermal ducting
Energy SystemsFlue gas and heat recovery lines

7. Warum Käufer sich für Teda Ganghua entscheiden

Bei Teda Ganghua, we supply hot dipped aluminized steel pipes with controlled AS coating grades (AS80–AS150), stable adhesion performance, und strenge Inspektionsstandards für industrielle Anwendungen.

Wir bieten OEM-Verarbeitung an, Schneiden, Biegen, und umfassende Exportverpackungsdienste für globale Kunden.

Entdecken Sie hier unsere aluminisierten Stahlrohrprodukte:
Produkte aus aluminisierten Stahlrohren

Abschluss

Die Qualität feueraluminierter Stahlrohre wird durch das Beschichtungsgewicht bestimmt, Haftfestigkeit, und strukturelle Integrität. Ordnungsgemäße Inspektion durch Dickenmessung, Metallographie, und Biegetests gewährleisten zuverlässige Leistung in anspruchsvollen Industrieumgebungen.

Aluminiumbeschichtetes Stahlrohr

Aluminisiertes Stahlrohr