Sa1c As80 aluminisiertes Stahlrohr

Beschreibung

SA1C+AS80 combines a general-purpose steel substrate with a standard Al-Si coating. In the JIS-oriented aluminized steel system, this combination is positioned as an entry-level option for ordinary tube applications. It can be considered when moderate corrosion protection, practical forming, and controlled cost are more important than maximum coating weight or higher substrate performance.

What Does SA1C+AS80 Mean?

The designation contains two separate parts:

SA1C = ordinary-grade steel substrate

AS80 = approximately 80 g/m² total Al-Si coating weight, subject to the applicable specification and tolerance

The steel provides the basic mechanical structure. The aluminum-silicon coating provides improved oxidation and corrosion resistance compared with uncoated carbon steel in suitable environments.

It is important to keep the two designations separate. SA1C describes the substrate, while AS80 describes the coating. Changing AS80 to AS120 increases coating protection, but it does not change the underlying steel grade. Likewise, upgrading the substrate to SA1D does not automatically increase the coating weight.

Entry-Level JIS Combination for General Tubes

SA1C+AS80 is best viewed as a practical starting combination for ordinary service. It is suitable when the tube does not require unusually high mechanical properties, severe corrosion resistance, or the highest coating grade.

ArtikelSA1C+AS80 ReferenceProcurement Meaning
SubstratSA1COrdinary-grade steel base
BeschichtungAS80Standard Al-Si coating level
Typical positioningEntry / general purposeBalanced initial specification
BildenRunden, oval, or other tube profilesConfirm production capability
ServiceGeneral indoor / outdoor useEnvironment must be checked
Coating basisg/m²Confirm exact standard and tolerance

The term “standard coating” here means a practical middle-entry coating level in the requested grade sequence. It should not be interpreted as a universal JIS requirement that every SA1C product must use AS80.

Typical SA1C+AS80 Tube Specifications

Actual dimensions depend on the tube manufacturing route and application. The following values can be used as practical inquiry examples:

ProfileExample SizeWandstärkeLängeBeschichtung
Round tube25 mm OD1.0 mm6,000 mmAS80
Round tube38.1 mm OD1.2 mm6,000 mmAS80
Round tube50.8 mm OD1.5 mm6,000 mmAS80
Oval tube50 × 25 mm1.5 mm6,000 mmAS80

These are example specifications rather than fixed standard dimensions. For non-standard profiles, the buyer should provide a drawing showing the outside dimensions, Wandstärke, Toleranzen, Länge, and required coating.

Where Is SA1C+AS80 Used?

The combination is suitable for applications where ordinary steel strength and a moderate Al-Si coating are sufficient.

Exhaust Tubes

Selected exhaust components and general exhaust tube applications where the actual temperature and atmosphere remain within the material design limits.

General Parts

Brackets, guards, equipment components, supports, and other ordinary fabricated parts.

Drinnen & Im Freien

General indoor service and selected outdoor applications where corrosion exposure is not especially severe.

For exhaust applications, temperature should be checked separately. The AS80 designation alone does not establish a universal continuous-use temperature. Thermal cycling, atmosphere, tube wall thickness, substrate, Bildung, Schweißen, and coating condition all affect performance.

When Should You Upgrade to AS120?

AS120 is a logical upgrade when the main concern is more coating protection rather than higher substrate strength.

RequirementSA1C+AS80Consider SA1C+AS120
Mild environmentGood starting pointMay be unnecessary
More outdoor exposureCheck carefullyMore suitable candidate
Higher corrosion concernLimited marginBetter coating margin
Cost-sensitive general partsPreferred starting optionUpgrade if justified

Salt-spray results should also be compared only under the same test method, Probenvorbereitung, exposure conditions, and failure criteria. Test hours should not be converted directly into a guaranteed outdoor service life.

When Should You Upgrade to SA1D?

Changing from SA1C to SA1D is a different decision. It concerns the steel substrate, not simply the coating.

SA1D should be considered when the application requires a different substrate performance level, forming behavior, or specification requirement. If the project specification calls for a particular mechanical property or forming grade, the substrate designation should be selected first. The coating grade can then be selected separately.

Simple upgrade rule: Need more surface protection? Consider moving from AS80 to AS120. Need different substrate performance? Review SA1C versus SA1D. Need both? Specify the upgraded substrate and coating together.

SA1C+AS80 Ordering Example

A clear inquiry should avoid using only the product name. A complete example can be written as:

Product: SA1C+AS80 aluminized steel tube

Profile: Runden

Größe: 50.8 mm OD × 1.5 mm WT

Länge: 6,000 mm

Beschichtung: AS80

Quantity: 2,000 pcs

Anwendung: General exhaust / fabricated component

This information gives the supplier enough detail to check dimensions, production feasibility, Beschichtungsanforderungen, packing, and delivery conditions.

SA1C+AS80 Aluminized Tube in Stock

For standard sizes, stock availability can be an important advantage when a project needs short delivery. Teda Ganghua can support inquiries for aluminierte Stahlrohre by checking available profiles, Abmessungen, coating grades, and quantities.

For repeat industrial orders, buyers can also specify the required substrate, AS coating grade, OD or profile dimensions, Wandstärke, Länge, Menge, Inspektionsunterlagen, und Verarbeitungsanforderungen. This allows stocked material and production orders to be evaluated against the same technical specification.

SA1C+AS80 vs SA1C+AS120 vs SA1D+AS80

CombinationMain ChangeTypical Reason to Choose
SA1C+AS80Entry substrate + standard coatingGeneral-purpose, cost-conscious applications
SA1C+AS120Higher coating levelMore coating protection is required
SA1D+AS80Different substrate gradeSubstrate properties or forming requirements drive the choice

The best combination is therefore determined by the application, not by the coating grade alone. A lower-cost specification can be appropriate when the service environment is mild. An upgrade is justified when the actual operating conditions require additional performance.

FAQ

1. What does SA1C+AS80 mean?

SA1C identifies the ordinary steel substrate, while AS80 identifies the Al-Si coating level. They describe different parts of the product specification.

2. Is SA1C+AS80 suitable for exhaust pipe?

It can be suitable for selected general exhaust applications, but operating temperature, Temperaturwechsel, atmosphere, Wandstärke, and coating condition must be checked before selection.

3. Should I choose AS120 instead of AS80?

Consider AS120 when additional coating protection is needed. Die Entscheidung sollte auf der Korrosionsexposition und den Betriebsbedingungen basieren und nicht nur auf dem Beschichtungsgewicht.

4. Was ist der Unterschied zwischen der Aktualisierung von AS80 und der Aktualisierung von SA1C??

AS80 bis AS120 ändert den Beschichtungsgrad. SA1C zu SA1D ändert die Substratspezifikation. Sie lösen unterschiedliche technische Anforderungen.

5. Können SA1C+AS80-Röhren ab Lager geliefert werden??

Standardgrößen können ab Lager verfügbar sein, abhängig von den Abmessungen, Profil, Beschichtung, und Menge. Käufer sollten die vollständigen Spezifikationen bereitstellen, damit der aktuelle Lagerbestand genau überprüft werden kann.

Aluminisiertes Kohlenstoffstahlrohr

Mit Al-Si-Legierung beschichtetes Stahlrohr