Tubería de acero aluminizada Astm A463 As80
- Descripción
Descripción
“ASTM A463 AS80” is a useful commercial search term, but it needs one important specification check. ASTM A463/A463M defines aluminum-coated steel sheet using Type 1 o tipo 2 coating designations and coating mass requirements; “AS80” is not the formal ASTM A463 designation. In commercial tube purchasing, AS80 may be used to indicate an approximately 80 g/m² coating level, so the buyer should confirm the exact ASTM coating designation, coating type, and test requirement before ordering. ASTM A463 covers aluminum-coated steel sheet in coils and cut lengths, which can subsequently be processed into welded tube.
Procurement note: If a quotation says “AS80 = 80 gramos/m²,” do not automatically rewrite the purchase order as “ASTM A463 AS80.” Ask the supplier to identify whether the material is A463 Type 1 o tipo 2 and which ASTM coating designation corresponds to the requested coating mass. This prevents a commercial coating code from being mistaken for an ASTM designation.
What Does AS80 Mean in Aluminized Steel?
In commercial aluminized-steel terminology, AS80 generally indicates an approximately 80 g/m² coating-weight level. The number is useful because coating mass is directly related to the amount of aluminum available on the steel surface. More coating generally provides more material for corrosion and oxidation protection, but coating mass alone does not determine service life.
ASTM A463 itself uses coating designations such as T1 and T2 with numerical coating levels rather than the generic “AS80” format. Por ejemplo, current A463 tables specify multiple coating designations and corresponding minimum coating masses, while the standard also distinguishes Type 1 aluminum-silicon alloy coating from Type 2 commercially pure aluminum.
AS40
Light commercial coating level; generally selected where corrosion exposure and forming requirements are moderate.
AS80
Medium coating level in commercial terminology; a practical balance for general protection.
AS120
Higher coating level; more aluminum available for demanding corrosion or outdoor exposure.
AS150–AS200
Heavy commercial coating range for applications where greater coating reserve is required.
The important point is that the AS40–AS200 sequence should be treated as a commercial coating-weight hierarchy, not as an ASTM A463 table copied directly into the purchase order. ASTM A463 has its own coating designation system.
What Does 80 g/m² Actually Buy You?
An approximately 80 g/m² total coating level provides a meaningful aluminum reserve on the steel surface without moving into the heavier coating ranges. The practical benefit is a balance between material protection, forming requirements and coating consumption.
Sin embargo, 80 g/m² should not be translated directly into a fixed number of service years. Atmospheric exposure, humedad, salt contamination, temperatura, condensación, pollutants, scratches, weld areas, drainage and the quality of the original coating all affect actual durability.
| Factor | Effect on AS80 performance | Procurement focus |
|---|---|---|
| Masa de recubrimiento | Determines available aluminum protection | Confirm actual minimum mass and test method |
| Atmospheric exposure | Controls corrosion rate | Interior, outdoor, coastal or industrial environment |
| Condensation | Can accelerate localized corrosion | Drainage and ventilation design |
| Temperatura | Changes coating oxidation and service behavior | Continuous and intermittent operating temperature |
| Soldadura | Locally removes or changes the coating | Post-weld protection and weld-zone inspection |
| Mechanical damage | Creates local weak points | Manejo, bending and installation controls |
AS80 Position in the Coating Weight Range
AS80 sits between light and heavier commercial coating levels. It is therefore often considered when the application requires more protection than a light coating but does not justify the additional coating mass of AS120, AS150 or AS200.
| Commercial level | Relative coating reserve | Typical positioning |
|---|---|---|
| AS40 | Bajo | General indoor or moderate exposure |
| AS80 | Medio | General industrial protection and indoor/outdoor transition environments |
| AS120 | Medio-alto | More demanding outdoor or corrosion-exposed service |
| AS150 | Alto | Higher protection reserve where exposure justifies it |
| AS200 | muy alto | Severe coating-demand applications, subject to the applicable commercial specification |
This is a relative selection framework, not a universal durability ranking. A heavier coating is not automatically better if the tube will undergo severe forming, soldadura, or a service condition for which another coating type is more appropriate.
AS80 for General Industrial Protection
AS80 is most logical when the tube needs a practical level of aluminum protection for general industrial service without moving immediately to a heavy coating specification. Typical scenarios can include equipment supports, guards, fabricated frames, ventilation components, agricultural structures, light outdoor assemblies and indoor/outdoor transition areas.
For these applications, the coating is valuable because aluminum provides a protective surface while the steel substrate supplies structural strength. The final performance still depends on whether the coating is Type 1 o tipo 2 and on the actual tube manufacturing process.
Indoor equipment
AS80 can provide a reasonable corrosion-protection level where exposure is controlled.
Covered outdoor areas
A useful middle position when direct weather exposure is limited.
Industrial frames
Suitable for general protective requirements when the coating and substrate are correctly matched.
Agricultural structures
Potentially suitable, but humidity, fertilizer, chemicals and condensation should be evaluated before selecting the coating level.
AS80 vs AS120 vs AS150: Where Is the Cost Difference?
Moving from AS80 to AS120 or AS150 increases the amount of coating material applied to the steel. This normally increases the material cost because more aluminum is consumed, although the final tube price also depends on substrate grade, espesor de pared, dimensiones del tubo, production volume, formando, welding and inspection.
For procurement, the better question is not “Which coating is cheapest?” but “What coating level is sufficient for the actual exposure?" Selecting AS150 for a protected indoor application may add coating cost without delivering a proportional service benefit, while AS80 may be under-specified for persistent outdoor or aggressive exposure.
| Comparación | AS80 | AS120 | AS150 |
|---|---|---|---|
| Coating level | Medio | Más alto | Alto |
| Relative material cost | Más bajo | Higher than AS80 | Higher than AS120 |
| Protection reserve | Moderado | Más alto | Higher again |
| Best economic logic | When moderate protection is sufficient | When exposure justifies extra coating | When a larger coating reserve is required |
How Long Can AS80 Last?
There is no responsible universal service-life number for an AS80 tube. Coating mass is only one variable in a corrosion system. A tube installed indoors in a dry environment can have a dramatically different life from an otherwise identical tube exposed to coastal salt, industrial condensation or agricultural chemicals.
A useful procurement approach is to divide the expected service environment into low, moderate and aggressive exposure. AS80 can be a reasonable middle-level choice for low-to-moderate general protection, while AS120 or AS150 may be considered when the environment requires a larger coating reserve.
For a realistic life assessment, provide:
• Indoor or outdoor installation
• Approximate humidity and condensation conditions
• Coastal salt or industrial pollutants
• Operating temperature
• Contact with water, chemicals or fertilizer
• Expected mechanical damage during installation
• Required inspection and maintenance interval
AS80 Tube Specifications to Confirm
Because ASTM A463 is a sheet specification, the finished tube inquiry should add the tube dimensions and manufacturing requirements. A commercial AS80 designation by itself does not define outside diameter, espesor de pared, longitud, weld quality or dimensional tolerance.
| Tube parameter | Typical procurement requirement |
|---|---|
| Tube type | Redondo, cuadrado, rectangular or customized profile |
| Outside diameter | Specify nominal OD and tolerance |
| Grosor de la pared | Specify nominal WT and tolerance |
| Longitud | Fixed length or random length as required |
| Revestimiento | Commercial AS80 requirement plus exact ASTM Type/designation |
| Sustrato | CS, FS, SS or HSLAS grade as required |
| Soldadura | ERW/HFW or other agreed process; define weld-zone requirements |
| Inspección | MTC, coating-mass test and dimensional inspection as required |
AS80 and Welding: Protect the Weld Zone
When coated sheet is formed into tube and longitudinally welded, the welding operation locally affects the aluminum coating. The tube therefore cannot be evaluated only by the coating mass on the original flat strip. Weld-zone condition, post-weld treatment and handling damage should be included in the quality plan.
This is especially important when the tube is bent after welding. The buyer should confirm whether bending occurs before or after sizing, where the weld seam is positioned relative to the bend, and how coating continuity will be checked after forming.
Teda Ganghua Support for AS80 Aluminized Tube
For procurement teams comparing AS80, AS120 and AS150, Teda Ganghua can help align the commercial coating requirement with the actual tube specification. The inquiry can include tube OD, espesor de pared, longitud, grado de sustrato, coating type, coating mass, welding process and service environment so the quotation is based on the complete application rather than coating weight alone.
For tube sourcing, see ASTM A463 AS80 aluminized steel pipe. When submitting an inquiry, state whether “AS80” is a commercial 80 g/m² requirement or whether the project requires a specific ASTM A463 Type 1 o tipo 2 designación de recubrimiento. Teda Ganghua can then confirm the appropriate material and inspection documentation.
AS80 Selection Checklist
✓ Treat AS80 as a commercial coating-weight term unless the applicable specification explicitly defines it.
✓ Confirm the ASTM A463 coating type and exact coating designation.
✓ Approximately 80 g/m² represents a medium commercial coating level, not a guaranteed service-life rating.
✓ AS120 and AS150 provide greater coating reserve but normally require more coating material.
✓ Select the coating level according to exposure rather than automatically choosing the heaviest coating.
✓ For tube, separately specify OD, espesor de pared, longitud, substrate, welding and dimensional tolerances.
✓ Request coating-mass and material documentation on the MTC when ASTM compliance is required.
FAQs About ASTM A463 AS80 Aluminized Steel Pipe
Is AS80 an official ASTM A463 coating designation?
No. ASTM A463 uses Type 1 y tipo 2 coatings with specific T1/T2 coating designations. “AS80” is better treated as a commercial coating-weight term unless a separate purchasing specification defines it.
Does AS80 mean exactly 80 g/m² on every surface?
No necesariamente. Commercial terminology may use AS80 to describe an approximate coating level, while ASTM coating requirements are defined through specific designations and test methods. The purchaser should confirm whether the stated mass is total for both sides, a per-side value, or a minimum test requirement.
Is AS80 suitable for outdoor aluminized steel tube?
It can be considered for moderate outdoor exposure, but suitability depends on humidity, sal, pollutants, condensación, temperature and mechanical damage. Coastal or chemically aggressive environments may justify a higher coating level or a different material selection.
Is AS120 better than AS80?
AS120 provides a higher coating reserve in the commercial coating hierarchy, but “better” depends on the application. If AS80 already provides sufficient protection, pasar a AS120 puede agregar costos de material sin un beneficio proporcional.
¿Puedo pedir un tubo simplemente como ASTM A463 AS80??
Es mejor proporcionar la edición ASTM A463/A463M., Tipo de recubrimiento, designación exacta del recubrimiento o equivalente comercial acordado, grado de sustrato, diámetro exterior del tubo, espesor de pared, longitud, requisitos de soldadura y requisitos de inspección. La propia ASTM A463 se aplica a láminas de acero recubiertas en lugar de tubos terminados..


















