Tubo in acciaio alluminato As200

Descrizione

AS200 is the heavy-coating end of the aluminized steel pipe range. With a nominal coating weight of about 200 g/m², it provides a larger protective coating reserve than AS150 and other lighter grades. It is intended for demanding environments where corrosion, Calore, and service conditions place higher requirements on the coated surface. Tuttavia, the heaviest coating is not automatically the best choice for every application.

What Does AS200 Mean?

IL AS designation refers to the nominal coating weight. AS200 generally indicates approximately 200 g/m² of total aluminum-silicon coating on both sides, subject to the applicable standard and tolerance.

Gradoca. coating weightPositionUtilizzo tipico
AS120~120 g/m²Medio-altoModerate industrial exposure
AS150~150 g/m²Mid-highHot and wet service
AS200~200 g/m²Heavy coatingHeavy-duty corrosion and heat exposure

AS200 is therefore positioned at the upper end of this coating sequence. The exact grade structure varies by standard and manufacturer, so the purchase order should identify the applicable specification rather than relying on the AS number alone.

Why Choose AS200?

The main reason to move to AS200 is the need for a larger coating reserve. A heavier Al-Si coating provides more material between the environment and the steel substrate.

Corrosion Margin

More coating material can provide a larger reserve in demanding atmospheric conditions.

Heat Exposure

The aluminized surface is suited to selected elevated-temperature applications when the complete system is properly specified.

Service Margin

The heavier coating can provide additional protection when AS150 does not provide enough environmental margin.

AS200 should therefore be viewed as a heavy-duty coating option, not simply as a more expensive version of AS150.

AS200 Coating Thickness: Around 50 μm or More

Coating weight cannot be converted into one exact thickness value because coating density, alloy structure, process conditions, and measurement position all affect the result.

For AS200-level aluminized steel, an indicative coating thickness can be around 50 μm or more. The actual measured value should be controlled by the applicable product specification and inspection method.

Important: Do not use “50 μm+” as a universal contractual thickness. For procurement, specify the required AS200 coating weight, tolleranza, test method, e norma applicabile.

Heavy Coating Also Creates a Processing Challenge

A thicker aluminized coating provides more protective material, but it also requires more attention during forming. The Al-Si coating and its alloyed interface can be less forgiving when the tube is heavily deformed.

Sharp bending, aggressive expansion, and excessive flaring can create coating cracks or local damage. The risk depends on tube geometry, struttura del rivestimento, forming radius, utensileria, temperatura, and the specific manufacturing route.

Bending Protection

Use an appropriate bend radius and controlled forming process. Avoid unnecessary sharp bends that can place excessive strain on the coated surface.

Flaring and Expansion

Tube expansion and flaring should be performed with suitable tooling and controlled deformation. Excessive expansion can damage the coating around the formed area.

Cutting and End Processing

Cutting exposes the steel substrate at the tube end. For demanding environments, the exposed area may require an appropriate protection or finishing method based on the final application.

Processing operationMain riskRecommended approach
PiegaturaCoating cracking or local damageUse controlled forming and suitable bend radius
EspansioneLocal coating strainControl expansion ratio and tooling
FlaringSurface cracking at the formed endUse gradual forming and inspect the finished area
TaglioExposed steel at the cut edgeApply suitable edge protection when required

Typical AS200 Applications

AS200 is most useful where the tube faces a combination of elevated temperature and environmental exposure. It can be considered for demanding industrial systems when the coating and substrate are compatible with the operating conditions.

ApplicazioneWhy AS200 can be consideredCritical check
Industrial fluesHigher coating reserve for demanding atmospheric exposureTemperatura, gas chemistry, condensate
Scambiatori di caloreBalances thermal exposure and surface protectionFluid chemistry and operating temperature
Boiler accessoriesUseful for selected high-temperature componentsTemperature cycle and applicable equipment requirements
Severe exhaust systemsHeavy coating provides additional protection marginPeak temperature, condensate, composizione del gas

For very severe service, the coating grade alone is not enough. The steel substrate, metodo di saldatura, thermal cycle, atmosphere, and component design must also be reviewed.

AS200 vs AS150: When Is the Upgrade Worth It?

The move from AS150 to AS200 should be based on a clear performance requirement. A heavier coating adds material cost, so it should provide a useful benefit in the actual application.

ConditionAS150AS200Preferred direction
Moderate industrial exposureUsually sufficientMay be unnecessaryAS150
Hot and wet serviceGood candidateMore coating reserveApplication-specific
High corrosion demandMay be limitingBetter marginAS200
Severe exhaust environmentRequires verificationStrong candidateAS200 if temperature and coating system are suitable
Complex tube formingGenerally easier to manageGreater forming attention requiredReview processing before upgrading
Upgrade rule: AS200 is worth considering when the additional coating reserve addresses a real corrosion or service requirement. If AS150 already meets the environment and design life, moving to AS200 may add cost without a meaningful performance benefit.

AS200 Cost: The Top of the Coating Ladder

Because AS200 uses substantially more coating material than AS120 and AS150, it normally sits at the higher end of the coating cost range. As an indicative commercial comparison, AS200 can be around 15–25% more expensive than AS120, depending on tube dimensions, steel base, order quantity, production conditions, and market factors.

This percentage should be treated as a budgeting reference rather than a fixed market premium. Actual quotations can differ significantly between suppliers and project specifications.

GradoRelative coating costCost logic
AS120InferioreSuitable when medium-high protection is enough
AS150Medio-altoBalanced coating for demanding service
AS200HighestJustified when additional coating reserve is required

Salt Spray and Service Life

Salt spray testing can help compare coating systems under the same controlled laboratory conditions. Tuttavia, AS200 salt-spray hours should not be converted directly into outdoor service years.

Actual service life depends on humidity, esposizione al cloruro, pollutants, temperatura, coating damage, tube geometry, cut edges, and maintenance. A meaningful comparison should use the same test method, preparazione del campione, condizione del rivestimento, and failure criterion.

The main practical advantage of AS200 is its higher coating reserve. It should not be marketed as having a universal number of salt-spray hours or a guaranteed outdoor lifetime.

Procurement Checklist for AS200 Pipe

1. Rivestimento

Specify AS200, coating weight, tolleranza, and inspection method.

2. Dimensioni del tubo

Confirm outside diameter, spessore della parete, lunghezza, and dimensional tolerances.

3. Temperatura

State continuous temperature, temperatura di picco, e ciclo termico.

4. Environment

Describe humidity, sale, prodotti chimici, condensate, ed esposizione all'aperto.

5. Elaborazione

Confirm bending, svasato, expansion, saldatura, taglio, and end-treatment requirements.

6. Documentation

Define material certificates, coating inspection, dimensional reports, and other quality documents.

AS200 Tube Supply: Stock and Project Orders

Teda Ganghua supports international buyers sourcing aluminized steel tubes for industrial, thermal, exhaust, and fabrication projects. For AS200 requirements, buyers can specify the tube dimensions, grado di acciaio, coating weight, requisiti di superficie, quantità, inspection documents, and downstream processing needs.

For projects that require quick delivery, available stock can be checked together with production requirements. For larger projects, bulk quantities can be evaluated to determine whether AS150 or AS200 provides the better overall cost-performance balance.

Buyers can review the available tubi in acciaio alluminato and provide the required size, AS200 coating level, quantità, and delivery requirements for a project-specific quotation.

AS200 Aluminized Steel Pipe FAQs

1. What is AS200 aluminized steel pipe?

AS200 generally refers to an aluminized coating weight of about 200 g/m² total on both sides. The exact value and tolerance must be confirmed against the applicable standard.

2. How thick is an AS200 coating?

An indicative coating thickness can be around 50 μm or more, but actual thickness depends on coating density, struttura, process control, and measurement method. The specified coating weight should be used for procurement control.

3. Is AS200 better than AS150?

AS200 provides a higher coating weight and a larger coating reserve. It is preferable when the service environment or project specification requires more protection. AS150 may be more economical when its performance is sufficient.

4. Can AS200 pipe be bent and flared?

SÌ, but forming must be controlled. Heavy aluminized coatings can be susceptible to cracking or local damage under excessive deformation. Raggio di curvatura, utensileria, expansion ratio, and final surface inspection should be considered.

5. Is AS200 suitable for high-temperature service?

It can be considered for selected high-temperature applications, ma non esiste una classificazione di temperatura universale basata solo sulla designazione AS200. Grado di acciaio, sistema di rivestimento, atmosphere, thermal cycle, e la durata del servizio devono essere tutti valutati.

Tubo in acciaio rivestito Al-Si

Tubi in acciaio alluminato a caldo