Tubo in acciaio alluminato Sa1c As80
- Descrizione
Descrizione
SA1C+AS80 combines a general-purpose steel substrate with a standard Al-Si coating. In the JIS-oriented aluminized steel system, this combination is positioned as an entry-level option for ordinary tube applications. It can be considered when moderate corrosion protection, practical forming, and controlled cost are more important than maximum coating weight or higher substrate performance.
What Does SA1C+AS80 Mean?
The designation contains two separate parts:
SA1C = ordinary-grade steel substrate
AS80 = approximately 80 g/m² total Al-Si coating weight, subject to the applicable specification and tolerance
The steel provides the basic mechanical structure. The aluminum-silicon coating provides improved oxidation and corrosion resistance compared with uncoated carbon steel in suitable environments.
It is important to keep the two designations separate. SA1C describes the substrate, while AS80 describes the coating. Changing AS80 to AS120 increases coating protection, but it does not change the underlying steel grade. Likewise, upgrading the substrate to SA1D does not automatically increase the coating weight.
Entry-Level JIS Combination for General Tubes
SA1C+AS80 is best viewed as a practical starting combination for ordinary service. It is suitable when the tube does not require unusually high mechanical properties, severe corrosion resistance, or the highest coating grade.
| Articolo | SA1C+AS80 Reference | Procurement Meaning |
|---|---|---|
| Substrato | SA1C | Ordinary-grade steel base |
| Rivestimento | AS80 | Standard Al-Si coating level |
| Typical positioning | Entry / general purpose | Balanced initial specification |
| Modulo | Girare, oval, or other tube profiles | Confirm production capability |
| Servizio | General indoor / outdoor use | Environment must be checked |
| Coating basis | g/m² | Confirm exact standard and tolerance |
The term “standard coating” here means a practical middle-entry coating level in the requested grade sequence. It should not be interpreted as a universal JIS requirement that every SA1C product must use AS80.
Typical SA1C+AS80 Tube Specifications
Actual dimensions depend on the tube manufacturing route and application. The following values can be used as practical inquiry examples:
| Profile | Example Size | Spessore della parete | Lunghezza | Rivestimento |
|---|---|---|---|---|
| Round tube | 25 mm OD | 1.0 mm | 6,000 mm | AS80 |
| Round tube | 38.1 mm OD | 1.2 mm | 6,000 mm | AS80 |
| Round tube | 50.8 mm OD | 1.5 mm | 6,000 mm | AS80 |
| Oval tube | 50 × 25 mm | 1.5 mm | 6,000 mm | AS80 |
These are example specifications rather than fixed standard dimensions. For non-standard profiles, the buyer should provide a drawing showing the outside dimensions, spessore della parete, tolleranze, lunghezza, and required coating.
Where Is SA1C+AS80 Used?
The combination is suitable for applications where ordinary steel strength and a moderate Al-Si coating are sufficient.
Exhaust Tubes
Selected exhaust components and general exhaust tube applications where the actual temperature and atmosphere remain within the material design limits.
General Parts
Brackets, guards, equipment components, supports, and other ordinary fabricated parts.
Al coperto & All'aperto
General indoor service and selected outdoor applications where corrosion exposure is not especially severe.
For exhaust applications, temperature should be checked separately. The AS80 designation alone does not establish a universal continuous-use temperature. Thermal cycling, atmosphere, tube wall thickness, substrate, formando, saldatura, and coating condition all affect performance.
When Should You Upgrade to AS120?
AS120 is a logical upgrade when the main concern is more coating protection rather than higher substrate strength.
| Requirement | SA1C+AS80 | Consider SA1C+AS120 |
|---|---|---|
| Mild environment | Good starting point | May be unnecessary |
| More outdoor exposure | Check carefully | More suitable candidate |
| Higher corrosion concern | Limited margin | Better coating margin |
| Cost-sensitive general parts | Preferred starting option | Upgrade if justified |
Salt-spray results should also be compared only under the same test method, preparazione del campione, exposure conditions, and failure criteria. Test hours should not be converted directly into a guaranteed outdoor service life.
When Should You Upgrade to SA1D?
Changing from SA1C to SA1D is a different decision. It concerns the steel substrate, not simply the coating.
SA1D should be considered when the application requires a different substrate performance level, forming behavior, or specification requirement. If the project specification calls for a particular mechanical property or forming grade, the substrate designation should be selected first. The coating grade can then be selected separately.
Simple upgrade rule: Need more surface protection? Consider moving from AS80 to AS120. Need different substrate performance? Review SA1C versus SA1D. Need both? Specify the upgraded substrate and coating together.
SA1C+AS80 Ordering Example
A clear inquiry should avoid using only the product name. A complete example can be written as:
Prodotto: SA1C+AS80 aluminized steel tube
Profile: Girare
Misurare: 50.8 mm OD × 1.5 mm WT
Lunghezza: 6,000 mm
Rivestimento: AS80
Quantity: 2,000 pcs
Applicazione: General exhaust / fabricated component
This information gives the supplier enough detail to check dimensions, production feasibility, requisiti di rivestimento, packing, and delivery conditions.
SA1C+AS80 Aluminized Tube in Stock
For standard sizes, stock availability can be an important advantage when a project needs short delivery. Teda Ganghua can support inquiries for tubi in acciaio alluminato by checking available profiles, dimensioni, gradi di rivestimento, and quantities.
For repeat industrial orders, buyers can also specify the required substrate, AS coating grade, OD or profile dimensions, spessore della parete, lunghezza, quantità, inspection documents, e requisiti di elaborazione. This allows stocked material and production orders to be evaluated against the same technical specification.
SA1C+AS80 vs SA1C+AS120 vs SA1D+AS80
| Combination | Main Change | Typical Reason to Choose |
|---|---|---|
| SA1C+AS80 | Entry substrate + standard coating | General-purpose, cost-conscious applications |
| SA1C+AS120 | Higher coating level | More coating protection is required |
| SA1D+AS80 | Different substrate grade | Substrate properties or forming requirements drive the choice |
The best combination is therefore determined by the application, not by the coating grade alone. A lower-cost specification can be appropriate when the service environment is mild. An upgrade is justified when the actual operating conditions require additional performance.
Domande frequenti
1. What does SA1C+AS80 mean?
SA1C identifies the ordinary steel substrate, while AS80 identifies the Al-Si coating level. They describe different parts of the product specification.
2. Is SA1C+AS80 suitable for exhaust pipe?
It can be suitable for selected general exhaust applications, but operating temperature, ciclo termico, atmosphere, spessore della parete, and coating condition must be checked before selection.
3. Should I choose AS120 instead of AS80?
Consider AS120 when additional coating protection is needed. The decision should be based on corrosion exposure and service conditions rather than coating weight alone.
4. What is the difference between upgrading AS80 and upgrading SA1C?
Da AS80 a AS120 cambia il livello di rivestimento. Da SA1C a SA1D modifica la specifica del substrato. Risolvono diverse esigenze ingegneristiche.
5. Il tubo SA1C+AS80 può essere fornito a magazzino?
Le dimensioni standard possono essere disponibili a magazzino, a seconda delle dimensioni, profilo, rivestimento, e quantità. Gli acquirenti devono fornire le specifiche complete in modo che le scorte attuali possano essere controllate accuratamente.



















