- 説明
説明
ASTM A463 is a steel sheet specification, not a finished tube specification. It covers hot-dip aluminum-coated steel sheet in coils and cut lengths, with two coating types and multiple coating designations. When this sheet is subsequently formed and welded into tube, buyers should distinguish the original A463 material requirement from the tube manufacturing specification.
Key point: In ASTM terminology, タイプ 1 is an aluminum-silicon alloy coating, 入力しながら 2 is commercially pure aluminum. The familiar “AS” coating numbers used in some commercial quotations should not automatically be treated as the ASTM A463 designation. For an ASTM purchase order, specify the A463 coating type and coating designation clearly.
What Does ASTM A463 Cover?
ASTM A463/A463M is the specification for 鋼板, aluminum-coated by the hot-dip process. It applies to coils and cut lengths and establishes requirements for the base steel, アルミニウムコーティング, coating mass, bending performance, dimensional requirements, and related general requirements. The specification works together with ASTM A924/A924M for applicable general requirements for hot-dip metallic-coated steel sheet.
A463
Defines the aluminum-coated steel sheet product and its coating types, designations, and material requirements.
A924
Provides general requirements applicable to hot-dip metallic-coated steel sheet, including dimensional and related provisions.
Tube conversion
A463 sheet can become welded tube or pipe, but tube dimensions and manufacturing requirements should be specified separately.
タイプ 1 対タイプ 2: The Most Important A463 Difference
The two coating types serve different engineering priorities. タイプ 1 uses an aluminum-silicon alloy bath containing approximately 5–11% silicon, 入力しながら 2 uses commercially pure aluminum. ASTM identifies Type 1 primarily with heat-resistant applications and situations where both corrosion resistance and heat exposure matter; タイプ 2 is principally intended for corrosion-resistance applications.
| アイテム | タイプ 1 | タイプ 2 |
|---|---|---|
| Coating chemistry | Aluminum-silicon alloy | Commercially pure aluminum |
| Silicon content in coating bath | Approximately 5–11% | Not an Al-Si alloy coating |
| Primary positioning | Heat resistance plus corrosion protection | 耐食性 |
| Typical downstream focus | 排気, 熱シールド, thermal components | General corrosion-resistant sheet and formed products |
| Base steel compatibility | Available across a broader range of A463 steel designations | More restricted to selected commercial, 形にする, structural and HSLA grades |
The distinction matters when the material will later become a tube. A tube for an exhaust or thermal application should not be specified simply as “aluminized steel.” The purchaser should identify the coating type, coating designation, 基板グレード, チューブの寸法, and forming or welding requirements.
How Are Coating Designations Written?
A463 uses T1/T2 coating designations rather than treating “AS” as the ASTM designation itself. Historical A463 examples include designations such as T1 40, T1 75, T1 120, T1 300, T2 200 and T2 300, with corresponding SI forms such as T1M 40 and T2M 200. The designation identifies the coating requirement; it should therefore be written explicitly in the purchase specification rather than replaced by a generic term such as “aluminized.”
Procurement warning: AS60, AS80, AS120, AS150 and similar commercial coating descriptions are widely used in the aluminized steel market, but they should not be assumed to be interchangeable with ASTM A463’s T1/T2 designation system. Ask the supplier to state the exact ASTM coating designation and applicable coating mass requirement on the MTC.
A463 Base Steel Grades: Commercial to Deep Drawing
Coating type is only half of the specification. A463 also classifies the underlying steel sheet into several material categories. These include Commercial Steel, 鋼の成形, 深絞り鋼, 超深絞り鋼, Structural Steel and High Strength Low Alloy Steel. The current specification also identifies ferritic stainless steel grades within its classification framework.
| Base steel category | Forming priority | Typical procurement logic |
|---|---|---|
| 商業用鋼材 (CS) | General forming | General-purpose fabricated components |
| 鋼の成形 (FS) | Higher forming requirement | More demanding bending and forming |
| 深絞り鋼 (DDS) | 深絞り加工 | Parts requiring substantial deformation |
| 超深絞り鋼 (エッズ) | Very high forming demand | Complex deep-drawn components |
| 構造用鋼 (SS) | Strength-oriented | Load-bearing and structural applications |
| HSLAS | Strength plus formability | Higher-strength fabricated structures |
This means that “A463 aluminized steel” does not identify a single mechanical-property level. The base steel designation must be stated. For a deep-drawn tube component, for example, selecting the appropriate drawing-grade substrate can be just as important as selecting the coating type.
From A463 Sheet to Aluminized Steel Tube
A463 itself is a sheet specification. In a tube supply chain, the sheet or coil can be slit, roll-formed and longitudinally welded into a tube. The finished tube therefore has two layers of technical information: the original aluminum-coated steel material requirement and the tube’s dimensional, welding and finishing requirements.
ステップ 1
Specify A463/A463M and the coating type.
ステップ 2
Specify the base steel grade or category.
ステップ 3
Define coating designation and surface condition.
ステップ 4
Specify tube OD, 壁の厚さ, length and weld requirements.
During tube production, longitudinal welding locally affects the original coating. The weld zone therefore needs appropriate process control and, where required by the application, post-weld treatment or protection. For high-temperature exhaust or thermal service, the selection of Type 1, ベーススチールグレード, wall thickness and weld design should be considered together rather than independently.
How to Write an ASTM A463 Tube Purchase Specification
A clear inquiry should avoid the vague phrase “ASTM A463 aluminized tube.” A more useful procurement description identifies the material source and the finished-tube requirements separately.
Recommended inquiry structure:
• Material standard: ASTM A463/A463M
• Coating: タイプ 1 またはタイプ 2
• Coating designation: exact T1/T2 designation or agreed equivalent requirement
• Base steel: CS, FS, DDS, エッズ, SS or HSLAS as required
• Tube size: outside diameter × wall thickness
• Tube length and dimensional tolerance
• Welding/forming requirement
• Surface condition and post-weld protection
• Inspection documents: MTC, coating test and dimensional inspection as required
This structure gives the supplier enough information to quote the correct material instead of substituting a different aluminized coating or base steel simply because the phrase “ASTM A463” appears on the inquiry.
Teda Ganghua Supply Support for Aluminized Steel Tube
For procurement teams sourcing coated tube from China, Teda Ganghua can support inquiries that require the material standard, coating type, substrate grade and finished-tube dimensions to be aligned before production. The purchasing team can provide the required OD, 壁の厚さ, 長さ, coating designation, base steel grade and application so the material can be reviewed as a complete specification rather than as a generic “aluminized tube.”
For tube inquiries, see ASTM A463 aluminized steel tube and include the required coating type and base steel grade in the inquiry. Teda Ganghua can also arrange material documentation and inspection requirements according to the agreed order specification.
ASTM A463 Quick Selection Guide
| If the priority is… | Start with… | Then confirm… |
|---|---|---|
| Heat plus corrosion resistance | タイプ 1 | Coating designation, substrate and service temperature |
| 一般的な腐食保護 | タイプ 2 | Required coating mass and forming conditions |
| Deep forming | DDS or EDDS substrate | コーティングの種類, bend performance and final geometry |
| 構造強度 | SS or HSLAS substrate | 学年, class, mechanical requirements and tube design |
| Finished welded tube | A463-compliant sheet/coil | Tube standard, の, WT, weld zone and post-weld protection |
FAQs About ASTM A463 Aluminized Steel
Is ASTM A463 a tube standard?
いいえ. ASTM A463/A463M は、コイルおよびカット長さの溶融アルミニウムめっき鋼板をカバーします. Tube manufacturers can use A463-compliant sheet or coil as feedstock, but the finished tube requires its own dimensional and manufacturing requirements.
What is the difference between A463 Type 1 とタイプ 2?
タイプ 1 uses an aluminum-silicon alloy coating containing approximately 5–11% silicon in the coating bath and is principally associated with heat-resistant applications. タイプ 2 uses commercially pure aluminum and is principally intended for corrosion resistance.
Does ASTM A463 use AS120 or AS150 as its main coating designation?
ASTM A463 uses its own T1/T2 coating designation system. Commercial markets may use AS-style terminology, so the safest purchasing practice is to state the ASTM coating type and exact designation and request confirmation of the equivalent coating mass when a commercial AS designation is also quoted.
Can A463 sheet be used to manufacture welded tube?
はい. A463 covers the coated sheet material, which can be slit, formed and welded into tube. しかし, the buyer should separately specify tube dimensions, 公差, weld requirements and any post-weld coating protection.
Which A463 base steel is better for deep drawing?
DDS or EDDS is the logical starting point when the component requires substantial or very demanding deformation. 最終的な選択は、成形ジオメトリに照らして確認する必要があります。, 厚さ, A463 は複数の基材カテゴリをカバーしているため、コーティングの種類と必要な機械的特性.

















