- 설명
설명
AS150 aluminized steel coil is one of the most widely selected aluminium-silicon coating classes for industrial heat-resistant applications. With a nominal coating mass of 150 g/m², it provides a strong balance between oxidation resistance, coating durability, and manufacturing efficiency.
For automotive exhaust systems, 난방 장비, 오븐, and high-temperature industrial components, AS150 is often considered a practical standard choice because it delivers reliable protection without requiring the heaviest coating level.
What Does AS150 Mean in Aluminized Steel?
The AS150 designation refers to an aluminium-silicon coating class under the aluminized steel coating system. The number “150” represents the nominal total coating mass on both surfaces.
| 목 | AS150 Specification |
|---|---|
| 코팅 유형 | Aluminium-silicon alloy coating |
| Nominal Coating Weight | 150 g/m² total coating mass |
| Approximate Thickness | About 21–25 μm per side |
| 주요 특징 | High-temperature oxidation protection |
The actual coating thickness depends on production conditions, coating distribution, and measurement location. 그러므로, coating mass inspection is normally used for acceptance verification.
Why AS150 Became the Common Industrial Standard
The popularity of AS150 comes from the balance between protection performance and practical manufacturing requirements. A lighter coating may reduce protection time, while a heavier coating increases material consumption and may not provide additional value for normal service conditions.
• Suitable for continuous heat exposure environments
• Strong resistance against oxidation
• Good coating stability during forming
• Balanced choice for large-volume industrial production
In many exhaust and heating applications, the operating temperature can approach around 600–700°C. AS150 provides sufficient aluminium protection for these environments while maintaining good processability.
Typical Applications of AS150 Aluminized Steel
AS150 is widely used where steel components must resist repeated heating cycles and oxidation.
| 애플리케이션 | Why AS150 Is Selected |
|---|---|
| Automotive exhaust mufflers | Protects against high-temperature oxidation |
| 촉매 변환기 쉘 | Maintains durability under heat cycles |
| Boiler components | Improves oxidation resistance |
| Oven and grill parts | Provides heat-resistant surface protection |
AS150 vs AS120 vs AS200 Comparison
Different coating classes are selected according to temperature exposure, 서비스 수명 요구 사항, and environmental severity.
| Coating Class | 대략. 두께 | Protection Level | Typical Selection |
|---|---|---|---|
| AS120 | 17–20 μm/side | Balanced protection | General industrial components |
| AS150 | 21–25 μm/side | Standard high protection | Exhaust and heating systems |
| AS200 | Higher than AS150 | Heavy-duty protection | Severe environments |
AS150 Coating Uniformity and Edge Effect
During continuous coating production, coating distribution must be carefully controlled. One common inspection point is the edge effect, where coating thickness near the strip edge may differ from the center area.
For critical applications, buyers should confirm:
- Coating weight test results
- Thickness measurement positions
- Surface condition across the coil width
- Coating adhesion after forming
A visually smooth surface does not always guarantee uniform coating weight, so technical inspection documents are important for industrial purchasing.
AS150 Aluminized Steel Coil Purchasing Guide
A complete purchasing specification should include the coating class, 강철 등급, 치수, 기계적 요구 사항, 및 검사 요구 사항.
| Required Information | 목적 |
|---|---|
| Coating Class | Confirm AS150 requirement |
| Thickness and Width | Match forming and fabrication equipment |
| 기계적 성질 | Ensure application performance |
| Inspection Report | 코팅 품질 확인 |
Teda Ganghua AS150 Aluminized Steel Coil Supply
Teda Ganghua provides aluminized steel solutions for customers requiring stable coating grades, 맞춤형 사양, and industrial processing support. For projects requiring reliable 알루미늄 도금 강철 코일, professional assistance is available for coating selection, technical confirmation, and production requirements.
FAQ About AS150 Aluminized Steel Coil
1. What is AS150 aluminized steel coating?
AS150 is an aluminium-silicon coating class with a nominal coating mass of 150 g/m² on both sides combined.
2. Why is AS150 widely used?
AS150은 내산화성 간의 실질적인 균형을 제공합니다., coating durability, and manufacturing efficiency.
3. AS150 알루미늄 도금 강철은 어떤 온도를 견딜 수 있습니까??
AS150은 일반적으로 고온 노출과 관련된 응용 분야에 선택됩니다., 배기 및 난방 부품 포함.
4. AS120과 AS150의 차이점은 무엇인가요??
AS150은 AS120에 비해 코팅이 더 두껍고 산화 방지 기능이 더 깁니다..
5. AS150 코팅 품질을 어떻게 확인해야 합니까??
코팅 질량 테스트, 두께 측정, 표면 검사, 품질 문서는 일반적으로 검증에 사용됩니다..














