- 설명
설명
용융 알루미늄 도금 강관: Quality Indicators, 코팅 두께 & Inspection Methods
Hot dipped aluminized steel pipe is a corrosion- and heat-resistant steel product coated by immersing carbon steel into a molten aluminum or aluminum-silicon bath. Its performance is highly dependent on coating weight, adhesion quality, and metallurgical structure.
For industrial buyers, especially in automotive exhaust, 열교환, and furnace systems, understanding coating grade and inspection methods is critical for ensuring long-term reliability.
1. Coating Weight Grades (AS80 / AS120 / AS150)
| 코팅 등급 | 코팅 중량 (g/m²) | 일반적인 성능 |
|---|---|---|
| AS80 | ~80 g/m² | Light-duty corrosion protection, HVAC 시스템 |
| AS120 | ~120g/m² | Standard automotive exhaust and industrial piping |
| AS150 | ~150 g/m² | Heavy-duty high-temperature and aggressive environments |
Higher coating weight improves corrosion resistance but may slightly reduce formability in tight bending applications.
2. Key Quality Indicators for Buyers
| Indicator | Requirement |
|---|---|
| Coating Uniformity | No visible bare spots or uneven thickness |
| Adhesion Strength | No peeling under bending or impact deformation |
| 표면 상태 | Smooth Al-Si layer with minimal pinholes or rough particles |
| 내열성 | Stable performance at 600–800°C operating conditions |
A consistent coating layer is essential for long-term durability in thermal cycling environments.
3. 코팅 두께 & 테스트 방법
| Test Method | 목적 |
|---|---|
| Magnetic Thickness Gauge | Non-destructive measurement of coating thickness |
| Metallographic Analysis | Cross-section observation of coating layers and diffusion zone |
| Weight Method (Gravimetric) | Determines coating mass per unit area (AS grade verification) |
| Salt Spray Test | Accelerated corrosion resistance evaluation |
These methods ensure compliance with industrial and automotive quality standards.
4. Mechanical & Forming Performance Tests
| Test Type | Evaluation Purpose |
|---|---|
| Bending Test | Evaluates coating adhesion under deformation (no cracking or peeling) |
| Flanging Test | Assesses edge formability for exhaust system fabrication |
| Impact Test | Checks coating integrity under mechanical stress |
Good aluminized pipe should maintain coating integrity even after severe forming operations.
5. Common Defects in Poor-Quality Products
| Defect | Risk |
|---|---|
| Pinholes | Local corrosion initiation points |
| Uneven coating thickness | Reduced lifespan in weak zones |
| Peeling or flaking | Loss of thermal and corrosion protection |
| Brittle intermetallic layer | Cracking during bending or installation |
6. Application Overview
| 산업 | 애플리케이션 |
|---|---|
| 자동차 | 배기관, 머플러, catalytic systems |
| 산업용 난방 | Furnace and high-temperature gas pipelines |
| HVAC 시스템 | Ventilation and thermal ducting |
| Energy Systems | Flue gas and heat recovery lines |
7. 구매자가 Teda Ganghua를 선택하는 이유
~에 테다강화, we supply hot dipped aluminized steel pipes with controlled AS coating grades (AS80–AS150), stable adhesion performance, 산업용 애플리케이션에 대한 엄격한 검사 기준.
우리는 OEM 처리를 제공합니다, 절단, 굽힘, 글로벌 고객을 위한 완벽한 수출 포장 서비스.
여기에서 알루미늄 도금 강철 튜브 제품을 살펴보세요.:
알루미늄 도금 강철 튜브 제품
결론
용융 알루미늄 도금 강관의 품질은 코팅 중량에 따라 결정됩니다., 접착력, 구조적 무결성. 두께측정을 통한 정확한 검사, 금속학, 굽힘 테스트는 까다로운 산업 환경에서 안정적인 성능을 보장합니다..



















