- Penerangan
Penerangan
AS150 aluminized steel coil is one of the most widely selected aluminium-silicon coating classes for industrial heat-resistant applications. With a nominal coating mass of 150 g/m², it provides a strong balance between oxidation resistance, coating durability, and manufacturing efficiency.
For automotive exhaust systems, peralatan pemanas, ketuhar, and high-temperature industrial components, AS150 is often considered a practical standard choice because it delivers reliable protection without requiring the heaviest coating level.
What Does AS150 Mean in Aluminized Steel?
The AS150 designation refers to an aluminium-silicon coating class under the aluminized steel coating system. The number “150” represents the nominal total coating mass on both surfaces.
| item | AS150 Specification |
|---|---|
| Jenis Salutan | Aluminium-silicon alloy coating |
| Nominal Coating Weight | 150 g/m² total coating mass |
| Approximate Thickness | About 21–25 μm per side |
| Ciri Utama | High-temperature oxidation protection |
The actual coating thickness depends on production conditions, coating distribution, and measurement location. Oleh itu, coating mass inspection is normally used for acceptance verification.
Why AS150 Became the Common Industrial Standard
The popularity of AS150 comes from the balance between protection performance and practical manufacturing requirements. A lighter coating may reduce protection time, while a heavier coating increases material consumption and may not provide additional value for normal service conditions.
• Suitable for continuous heat exposure environments
• Strong resistance against oxidation
• Good coating stability during forming
• Balanced choice for large-volume industrial production
In many exhaust and heating applications, the operating temperature can approach around 600–700°C. AS150 provides sufficient aluminium protection for these environments while maintaining good processability.
Typical Applications of AS150 Aluminized Steel
AS150 is widely used where steel components must resist repeated heating cycles and oxidation.
| Permohonan | Why AS150 Is Selected |
|---|---|
| Automotive exhaust mufflers | Protects against high-temperature oxidation |
| Cangkerang penukar pemangkin | Maintains durability under heat cycles |
| Boiler components | Improves oxidation resistance |
| Oven and grill parts | Provides heat-resistant surface protection |
AS150 vs AS120 vs AS200 Comparison
Different coating classes are selected according to temperature exposure, keperluan hayat perkhidmatan, and environmental severity.
| Coating Class | lebih kurang. Ketebalan | Protection Level | Typical Selection |
|---|---|---|---|
| AS120 | 17–20 μm/side | Balanced protection | General industrial components |
| AS150 | 21–25 μm/side | Standard high protection | Exhaust and heating systems |
| AS200 | Higher than AS150 | Heavy-duty protection | Severe environments |
AS150 Coating Uniformity and Edge Effect
During continuous coating production, coating distribution must be carefully controlled. One common inspection point is the edge effect, where coating thickness near the strip edge may differ from the center area.
For critical applications, buyers should confirm:
- Coating weight test results
- Thickness measurement positions
- Surface condition across the coil width
- Coating adhesion after forming
A visually smooth surface does not always guarantee uniform coating weight, so technical inspection documents are important for industrial purchasing.
AS150 Aluminized Steel Coil Purchasing Guide
A complete purchasing specification should include the coating class, gred keluli, dimensi, keperluan mekanikal, dan keperluan pemeriksaan.
| Required Information | Tujuan |
|---|---|
| Coating Class | Confirm AS150 requirement |
| Thickness and Width | Match forming and fabrication equipment |
| Sifat Mekanikal | Ensure application performance |
| Inspection Report | Sahkan kualiti salutan |
Teda Ganghua AS150 Aluminized Steel Coil Supply
Teda Ganghua provides aluminized steel solutions for customers requiring stable coating grades, spesifikasi tersuai, and industrial processing support. For projects requiring reliable gegelung keluli beraluminium, professional assistance is available for coating selection, technical confirmation, and production requirements.
FAQ About AS150 Aluminized Steel Coil
1. What is AS150 aluminized steel coating?
AS150 is an aluminium-silicon coating class with a nominal coating mass of 150 g/m² on both sides combined.
2. Why is AS150 widely used?
AS150 menyediakan keseimbangan praktikal antara rintangan pengoksidaan, coating durability, and manufacturing efficiency.
3. Apakah suhu boleh mengendalikan keluli beraluminium AS150?
AS150 biasanya dipilih untuk aplikasi yang melibatkan pendedahan suhu tinggi, termasuk komponen ekzos dan pemanasan.
4. Apakah perbezaan antara AS120 dan AS150?
AS150 mempunyai salutan yang lebih berat dan memberikan perlindungan pengoksidaan yang lebih lama berbanding dengan AS120.
5. Bagaimanakah kualiti salutan AS150 harus diperiksa?
Ujian jisim salutan, pengukuran ketebalan, pemeriksaan permukaan, dan dokumentasi kualiti biasanya digunakan untuk pengesahan.












