Bobina de aço aluminizado As150

Descrição

AS150 aluminized steel coil is one of the most widely selected aluminium-silicon coating classes for industrial heat-resistant applications. With a nominal coating mass of 150 g/m², it provides a strong balance between oxidation resistance, coating durability, and manufacturing efficiency.

For automotive exhaust systems, equipamento de aquecimento, fornos, and high-temperature industrial components, AS150 is often considered a practical standard choice because it delivers reliable protection without requiring the heaviest coating level.

What Does AS150 Mean in Aluminized Steel?

The AS150 designation refers to an aluminium-silicon coating class under the aluminized steel coating system. The number “150” represents the nominal total coating mass on both surfaces.

ItemAS150 Specification
Tipo de revestimentoAluminium-silicon alloy coating
Nominal Coating Weight150 g/m² total coating mass
Approximate ThicknessAbout 21–25 μm per side
Recurso principalHigh-temperature oxidation protection

The actual coating thickness depends on production conditions, coating distribution, and measurement location. Portanto, coating mass inspection is normally used for acceptance verification.

Why AS150 Became the Common Industrial Standard

The popularity of AS150 comes from the balance between protection performance and practical manufacturing requirements. A lighter coating may reduce protection time, while a heavier coating increases material consumption and may not provide additional value for normal service conditions.

Key Advantages of AS150:
• Suitable for continuous heat exposure environments
• Strong resistance against oxidation
• Good coating stability during forming
• Balanced choice for large-volume industrial production

In many exhaust and heating applications, the operating temperature can approach around 600–700°C. AS150 provides sufficient aluminium protection for these environments while maintaining good processability.

Typical Applications of AS150 Aluminized Steel

AS150 is widely used where steel components must resist repeated heating cycles and oxidation.

AplicativoWhy AS150 Is Selected
Automotive exhaust mufflersProtects against high-temperature oxidation
Invólucros do conversor catalíticoMaintains durability under heat cycles
Boiler componentsImproves oxidation resistance
Oven and grill partsProvides heat-resistant surface protection

AS150 vs AS120 vs AS200 Comparison

Different coating classes are selected according to temperature exposure, requisitos de vida útil, and environmental severity.

Coating ClassAprox.. GrossuraProtection LevelTypical Selection
AS12017–20 μm/sideBalanced protectionGeneral industrial components
AS15021–25 μm/sideStandard high protectionExhaust and heating systems
AS200Higher than AS150Heavy-duty protectionSevere environments

AS150 Coating Uniformity and Edge Effect

During continuous coating production, coating distribution must be carefully controlled. One common inspection point is the edge effect, where coating thickness near the strip edge may differ from the center area.

For critical applications, buyers should confirm:

  • Coating weight test results
  • Thickness measurement positions
  • Surface condition across the coil width
  • Coating adhesion after forming

A visually smooth surface does not always guarantee uniform coating weight, so technical inspection documents are important for industrial purchasing.

AS150 Aluminized Steel Coil Purchasing Guide

A complete purchasing specification should include the coating class, classe de aço, dimensões, requisitos mecânicos, e requisitos de inspeção.

Required InformationPropósito
Coating ClassConfirm AS150 requirement
Thickness and WidthMatch forming and fabrication equipment
Propriedades MecânicasEnsure application performance
Inspection ReportVerifique a qualidade do revestimento

Teda Ganghua AS150 Aluminized Steel Coil Supply

Teda Ganghua provides aluminized steel solutions for customers requiring stable coating grades, especificações personalizadas, and industrial processing support. For projects requiring reliable bobina de aço aluminizado, professional assistance is available for coating selection, technical confirmation, and production requirements.

FAQ About AS150 Aluminized Steel Coil

1. What is AS150 aluminized steel coating?

AS150 is an aluminium-silicon coating class with a nominal coating mass of 150 g/m² on both sides combined.

2. Why is AS150 widely used?

AS150 fornece um equilíbrio prático entre resistência à oxidação, coating durability, and manufacturing efficiency.

3. Que temperatura o aço aluminizado AS150 pode suportar?

AS150 é comumente selecionado para aplicações que envolvem exposição a altas temperaturas, incluindo componentes de exaustão e aquecimento.

4. Qual é a diferença entre AS120 e AS150?

AS150 tem um revestimento mais pesado e oferece maior proteção contra oxidação em comparação com AS120.

5. Como deve ser verificada a qualidade do revestimento AS150?

Teste de massa de revestimento, medição de espessura, inspeção de superfície, e documentação de qualidade são comumente usadas para verificação.

Bobina de aço aluminizado As60

Bobina de aço aluminizado As60