Tubo de aço aluminizado As150

Descrição

AS150 is a balanced mid-high coating grade for aluminized steel tube. With a nominal coating weight of about 150 g/m², it provides a stronger protection margin than lighter grades such as AS80 and AS120. It is widely considered when corrosion resistance, heat exposure, and material cost must be balanced. For exhaust systems, trocadores de calor, and water-heater tubing, the coating level should always be matched to the actual temperature and operating environment.

What Does AS150 Mean?

O AS number refers to the nominal aluminized coating weight. AS150 generally indicates approximately 150 g/m² of total coating on both sides, subject to the applicable standard and its specified tolerance.

NotaNominal coating weightProtection levelTypical positioning
AS80~80 g/m²MédioGeneral industrial service
AS120~120 g/m²Médio-altoMore demanding environments
AS150~150 g/m²Mid-highHot, molhado, and industrial service
AS200~200 g/m²AltoMore severe exposure

Coating weight should be stated together with the relevant standard. The AS designation alone should not be used to infer exact local coating thickness or guaranteed service life.

Why AS150 Is a Balanced Workhorse

The main advantage of AS150 is its position between light and heavy coating levels. It adds a meaningful protective reserve without automatically moving to the highest coating category.

Corrosion

A heavier Al-Si coating provides more material reserve than lighter grades under suitable corrosive conditions.

Aquecer

The aluminized surface is designed for applications where elevated temperature is important.

Custo

It can provide a practical middle point when a very heavy coating is not required.

For this reason, AS150 is often a useful mainstream specification for demanding but cost-sensitive tube applications. The correct choice still depends on temperature, umidade, atmosphere, tube design, e vida útil necessária.

AS150 Coating Thickness: About 30–40 μm

Coating weight and coating thickness are related through coating density, but they are not interchangeable specifications. The Al-Si coating also contains an alloyed transition region between the surface layer and steel substrate.

For AS150-level material, a practical indicative coating thickness is often discussed in the range of about 30–40 μm. This is a reference range rather than a universal contractual value. Actual thickness can vary with the coating process, measurement location, e padrão aplicável.

Procurement note: If coating thickness is critical to the application, specify the required coating weight and inspection method instead of purchasing only on the basis of an estimated micrometer value.

AS150 for Hot and Wet Service

AS150 becomes particularly interesting when a tube faces both temperature and moisture. The coating helps protect the carbon-steel substrate while providing an aluminized surface designed for elevated-temperature applications.

No entanto, “heat resistant” does not mean that every AS150 tube can operate continuously at any high temperature. Temperatura, exposure time, atmosphere, ciclagem térmica, and coating condition must be evaluated together.

The 450°C Reference Boundary

For applications around 450°C and below, AS150 can provide a useful performance margin compared with lighter coating selections when the material is otherwise suitable. The difference should not be interpreted as a universal temperature rating between AS150 and AS80. Actual maximum service temperature depends on the steel grade, sistema de revestimento, atmosphere, thermal cycle, and application design.

ConditionAS80AS150
Dry indoor serviceUsually sufficientMore coating reserve than necessary in some cases
Mild outdoor exposurePossibleHigher margin
Hot and wet serviceRequires evaluationOften more suitable
Around 450°CApplication-specificUseful reference range, subject to design verification
Severe high-temperature exposureRequires detailed reviewRequires detailed review

The key point is that AS150 provides more coating reserve, not an unlimited temperature rating.

Typical AS150 Tube Applications

The combination of coating protection and heat capability makes AS150 a practical candidate for several industrial tube applications.

AplicativoWhy AS150 can fitKey design check
Exhaust system main tubesHeat and oxidation protectionPeak temperature, condensate, gas chemistry
Trocadores de calorUseful balance of coating and corrosion protectionFluid chemistry and operating temperature
Water-heater tubesSuitable for selected thermal and atmospheric conditionsWater quality, temperatura, condensate, and code requirements
Industrial ductsHigher coating reserve than light gradesHumidity and chemical exposure

Salt Spray: How Should AS150 Be Compared?

Salt spray testing can show differences between coating systems under controlled laboratory conditions. A heavier coating can provide greater coating reserve, mas salt-spray hours should not be converted directly into years of service life.

For AS120, AS150, and AS200 comparisons, the test method, preparação de amostras, qualidade de revestimento, cut-edge condition, and failure criterion must be kept consistent. Otherwise, a higher reported number may not represent a meaningful material advantage.

FactorAS150 implication
Higher coating weightMore coating material is available before the substrate becomes exposed.
Salt spray resultUseful for controlled comparison, not direct service-life prediction.
Real outdoor lifeDepends on humidity, sal, pollutants, temperatura, dano, and maintenance.

AS150 vs AS120 vs AS200: Which Should You Choose?

The choice should be based on the required protection margin rather than simply selecting the largest coating number.

NotaCoating levelBest fitUpgrade reason
AS120Médio-altoModerate corrosion and temperature demandUse AS150 when more coating reserve is required
AS150Mid-highBalanced hot and wet industrial serviceMove to AS200 when exposure or specification requires more reserve
AS200AltoMore severe corrosion or coating requirementsHigher cost and coating amount may not be necessary for mild service
Simple selection rule: Choose AS120 when its protection margin is sufficient. Choose AS150 when corrosion, aquecer, and cost must be balanced. Move to AS200 when the service environment or project specification justifies the additional coating.

AS150 Is Not a Universal High-Temperature Solution

Aluminized steel is often selected for heat-related applications, but the coating system has limits. Long-term exposure at elevated temperature can change the coating structure and affect its protective performance.

For exhaust and thermal equipment, buyers should provide the continuous operating temperature, temperatura máxima, heating cycle, atmosphere, and expected service duration. A short peak at 450°C is not equivalent to continuous exposure at 450°C.

Where temperatures move well beyond the intended operating range, a different aluminized grade, heat-resistant alloy, or stainless steel solution may need to be evaluated.

Procurement Checklist for AS150 Tube

Revestimento

Confirm AS150 and the required coating-weight tolerance.

Dimensions

Specify outside diameter, espessura da parede, comprimento, and dimensional tolerances.

Temperatura

State continuous and peak temperatures rather than only “high temperature.”

Environment

Describe humidity, condensate, sal, produtos químicos, e exposição ao ar livre.

Inspeção

Define coating-weight testing, inspeção de superfície, dimensional checks, e certificados necessários.

AS150 Tube Supply: Stock and Bulk Orders

For production projects, material availability can be as important as the coating grade. Teda Ganghua supports international buyers sourcing aluminized steel tubes and related coated steel products for industrial applications. Buyers can provide tube dimensions, AS coating level, classe de aço, requisitos de superfície, quantidade, and inspection documents.

For recurring production or larger projects, stock availability and bulk-order pricing can be evaluated together. This helps buyers compare the cost of AS120, AS150, and AS200 based on the actual quantity and specification instead of selecting a coating level from price alone.

For project requirements, buyers can review the available tubos de aço aluminizados and provide the required size, coating grade, quantidade, and delivery requirements for a quotation.

AS150 Aluminized Steel Tube FAQs

1. What is AS150 aluminized steel tube?

AS150 generally refers to an aluminized coating level of about 150 g/m² total on both sides. The exact value and tolerance depend on the applicable product standard.

2. How thick is an AS150 coating?

An indicative thickness range of about 30–40 μm is often used for AS150-level material, but actual thickness varies. The coating weight and applicable standard should control the purchase specification.

3. Is AS150 suitable for 450°C service?

AS150 can be considered for applications around 450°C when the steel grade, sistema de revestimento, atmosphere, thermal cycle, and service duration are suitable. It should not be treated as a universal 450°C rating.

4. Is AS150 better than AS120?

AS150 provides a higher coating weight and therefore a greater coating reserve. It is useful when the application has higher corrosion or environmental demands, but AS120 may be more economical when its protection level is sufficient.

5. When should I upgrade from AS150 to AS200?

Consider AS200 when the service environment is more corrosive, a reserva de revestimento necessária é maior, ou a especificação do projeto exige um revestimento mais pesado. A decisão deve ser baseada na exposição real e na vida útil necessária.

Tubo de aço revestido com liga Al-Si

Tubo aluminizado de aço de baixo carbono