Алюминированная стальная труба на продажу

Описание

Aluminized steel pipe for sale is easier to compare when the stock list is organized by tube shape, толщина стены, coating grade, cut length and order quantity. Aluminized tube is commonly produced from continuously hot-dip aluminum-coated steel strip and then roll-formed, welded and sized into round, oval, square or rectangular sections. ASTM A463 covers aluminum-coated steel sheet in coils and cut lengths with two coating types and multiple coating weights, while finished-tube dimensions need to be defined separately. :contentReference[oaicite:0]{index=0}

Fast-quote checklist: send форма + outside diameter or section size + толщина стены + coating grade + длина + количество + end treatment. This is enough to establish whether an item can be supplied from stock, cut to length, or scheduled for production.

1. Aluminized Steel Pipe Stock List

For-sale inventory is normally easier to manage as a matrix rather than as one long size list. The following example shows the type of stock structure buyers can use when requesting a quotation. Actual availability depends on the current production and warehouse schedule.

Tube ShapeTypical Size FormatExample Wall ThicknessCoating OptionsОбщее использование
КруглыйOD 20–100 mm1.0–2,5 ммAS80–AS200 / specified coatingВыхлоп, каналы, thermal systems
ОвалMajor/minor axis specified1.0–2,5 ммAS80–AS200 / specified coatingAutomotive and compact airflow systems
Квадрат20 × 20–100 × 100 мм1.0–3,0 ммSpecified coatingFrames, supports and thermal equipment
RectangularWidth × height specified1.0–3,0 ммSpecified coatingDucting and fabricated assemblies

Commercial suppliers commonly list Type 1 Al-Si coated tube in round, oval, flattened-oval, square and rectangular sections, with wall thicknesses and cut lengths selected according to production capability. :contentReference[oaicite:1]{index=1}

2. Coating Grades: Specify the Coating, Not Just “Aluminized”

“Aluminized steel” can describe different coating systems. АСТМ А463, for example, covers two aluminum-coating types and several coating weights. Тип 1 uses an aluminum-silicon alloy bath, в то время как Тип 2 uses commercially pure aluminum. :contentReference[oaicite:2]{index=2}

Specification StyleПримерWhat the Buyer Should Confirm
ASTM Type 1Т1-25 / Т1-40 / Т1-60Тип, coating designation and substrate grade
ASTM Type 2T2 designationExact Type 2 coating requirement
JIS-style AS coatingАС80 / АС120 / АС150Applicable JIS grade and coating mass
EN-style +ASDX51D+AS120Субстрат, +AS coating mass and dimensional requirements

For reference, ASTM A463 Тип 1 coating designations include T1-13, Т1-25, T1-40 and T1-60; metric designations in ASTM documentation include T1M 40, T1M 75, T1M 120 and T1M 300. These coating masses are total coating values for both sides, so the designation should not be confused with coating mass on one side only. :contentReference[oaicite:3]{index=3}

3. Круглый, Овал, Square and Rectangular Tube Options

Round Tube

The most straightforward format for exhaust, hot-air, heating and general tubular applications. OD × WT × length is the normal quotation format.

Oval Tube

Specify major axis, minor axis, wall thickness and corner/transition geometry where applicable. Useful when packaging space is limited.

Square Tube

Specify side × side × WT. Corner radius and dimensional tolerance can be added for fabrication-sensitive applications.

Rectangular Tube

Specify width × height × WT, especially when the section is used as an airflow passage or structural enclosure.

4. Cut-to-Length Service

Stock tube does not always need to be purchased in standard mill lengths. Cut-to-length processing can reduce downstream handling when the required assembly length is already known.

ОбработкаTypical RequirementWhy Specify It
Cut lengthFixed length in mmReduces secondary cutting
DeburringRemove sharp cut edgesImproves handling and assembly
End preparationPlain, chamfered or other agreed endMatches downstream joining method
Batch cuttingMultiple lengths from stockSupports mixed-component orders

When cutting coated tube, the purchase specification should also state whether cut ends require additional treatment or protection. This is particularly relevant where the tube will be exposed to moisture or corrosive service after fabrication.

5. One-Piece Samples and Small-Batch Orders

For a new component, buying a large production quantity before checking fit and forming behavior can create unnecessary inventory. A more practical workflow is sample → dimensional confirmation → small batch → production batch.

Sample order: confirm OD/section size, WT, coating grade and cut length.
Prototype: check bending, flaring, сварка, fit-up and surface condition.
Small batch: verify repeatability and packaging before scaling up.
Производство: lock the approved specification and inspection documents.

This approach is especially useful for custom oval tubes, unusual rectangular sections, special cut lengths or applications where the tube must pass through a customer-specific assembly fixture.

6. Quantity-Based Quote Structure

For-sale inquiries can be divided into three practical quantity levels. The final commercial quotation should be based on the actual specification, требования к обработке, packaging and delivery terms rather than on quantity alone.

Order LevelTypical RequirementCommercial Focus
1 piece / samplePrototype or fit checkAvailability, cutting and sample logistics
Small batchPrototype production or initial projectMinimum production quantity and processing efficiency
Batch orderRepeated production demandProduction scheduling, packing and container logistics

For recurring orders, it is useful to keep the same grade, спецификация покрытия, dimensions and inspection basis so that each replenishment can be compared directly with the previous lot.

7. Fast Quote: Six Specifications to Send

A complete inquiry does not need to be complicated. These six items usually give a supplier enough information to determine the appropriate stock or production route:

01 — Shape
Круглый / oval / квадрат / прямоугольный
02 — Size
OD or width × height
03 — Wall
Nominal WT and tolerance
04 — Coating
Тип / grade / coating mass
05 — Length
Standard or cut length
06 — Quantity
Samples / small batch / производство

For a standards-based order, add the applicable specification such as ASTM A463, JIS G3314 or EN 10346 and identify the substrate grade. ASTM A463 itself is a sheet specification rather than a finished-pipe specification, so the tube dimensions and finished-product requirements should be stated separately. :contentReference[oaicite:4]{index=4}

8. Delivery and Logistics

Delivery time depends on whether the requested size is already available, needs cutting from existing tube, or requires a new production run. For stock material, the main variables are inspection, cut-to-length processing, deburring, packing and transport scheduling.

Supply RouteMain Lead-Time VariablesLogistics Preparation
Stock tubeInventory confirmation + инспекцияBundle packing and dispatch
Stock + резкаCutting quantity + deburring + инспекцияLength-separated bundles or labels
Custom productionRaw material + формирование + сварка + калибровкаExport packing and container planning

For export orders, packaging should protect the tube from deformation, impact and moisture during loading, inland transportation and container handling. Bundle identification should match the packing list so that multiple sizes or cut lengths can be separated efficiently after arrival.

9. Teda Ganghua Commercial Supply Support

Teda Ganghua can organize aluminized steel pipe for sale around both stock and project requirements, including round, oval and rectangular tube configurations, specified wall thicknesses, требования к покрытию, cut lengths, deburring and end processing. For buyers testing a new component, the supply route can also be structured around samples and small batches before moving to regular production quantities.

The quotation process can be built around the customer’s actual application rather than a generic “aluminized pipe” description. Buyers can provide the required tube shape, OD or section dimensions, толщина стены, coating grade, length and quantity, then confirm inspection documents and packaging before production or dispatch.

aluminized steel pipe for sale can be matched to stock availability, cut-to-length requirements and the required coating specification for the project.

10. Aluminized Steel Pipe Buying Checklist

CheckQuestion to Ask
ФормаКруглый, oval, square or rectangular?
РазмерWhat OD or section dimensions are required?
Толщина стенкиWhat nominal WT and tolerance are required?
ПокрытиеWhat coating type, grade or mass is required?
ДлинаStandard length or fixed cut length?
EndsPlain, deburred, chamfered or another preparation?
QuantityOne-piece sample, small batch or production quantity?
DocumentsMTC, coating test, dimensional report or other documents?
ShippingDestination, packaging and delivery requirement?

11. FAQs

Can I buy one piece of aluminized steel pipe for testing?

Sample availability depends on the requested size and current stock. A one-piece or small-batch inquiry should include the exact OD or section size, толщина стены, coating requirement and cut length so the supplier can check the most suitable supply route.

What is the fastest way to get a quote?

Send the tube shape, размеры, толщина стены, coating grade, length and quantity together. If a standard applies, include the standard and substrate grade as well.

Can stock tube be cut to a custom length?

Да, when the tube size and processing capability permit it. Confirm the cut-length tolerance, deburring requirement and end preparation before placing the order.

Should I specify ASTM A463 for the finished tube?

ASTM A463 covers aluminum-coated steel sheet in coils and cut lengths, rather than defining every finished-tube dimension. For a tube order, specify the coating/substrate requirement together with the applicable tube dimensions, допуски и требования к проверке. :contentReference[oaicite:5]{индекс=5}

Какую информацию следует включать в экспортную отправку?

В дополнение к спецификации материала, укажите количество, индивидуальная длина, требования к пакету, место назначения, требования к упаковке и необходимые документы по качеству. Это помогает поставщику последовательно подготовить материалы и отгрузочные документы..

Алюминированная стальная труба на продажу

Алюминированная стальная выхлопная труба