Цена алюминизированной стальной трубы за метр

Описание

Aluminized steel pipe is often quoted per metre when the buyer purchases cut lengths, finished tube sections, or components for field installation. The conversion is straightforward in principle: calculate the theoretical mass per metre from outside diameter and wall thickness, multiply it by the applicable material basis, then add coating, tube-making, cutting and other processing costs. The important point is to establish whether the quoted per-metre figure is based on theoretical weight, actual scale weight, or a finished-piece calculation.

Why Buyers Use a Per-Metre Basis

Per-metre costing is particularly practical when the final product is installed or fabricated by length rather than purchased by total tonnage. A contractor may need a specific number of 2 м, 3 m or 6 m sections, while a fabrication shop may calculate its material requirement from the length of each exhaust or duct section.

Резка

A per-metre basis makes it easier to calculate the material portion of each fixed-length piece.

Installation

Installers can compare material consumption directly with the required installed length.

Изготовление

Finished component costs can be built from length, cutting and forming requirements.

Однако, “per metre” is only a commercial unit. It does not explain how the number was calculated. Two suppliers can quote different metre values while both are mathematically correct if they use different substrate grades, характеристики покрытия, weight conventions, processing charges or delivery terms.

The Basic Weight-to-Length Conversion

For a round steel tube, the theoretical mass per metre can be estimated from the steel density and the cross-sectional area of the annulus. Using millimetres for outside diameter and wall thickness, a commonly used approximation for carbon steel is:

m ≈ 0.02466 × t × (D − t)

m = theoretical steel mass in kg/m
D = outside diameter in mm
t = wall thickness in mm

The formula calculates the steel substrate portion using a standard theoretical density. For a coated product, the actual finished mass can be somewhat different because the coating adds material and the finished tube may also have dimensional and manufacturing tolerances.

The commercial conversion can then be represented as:

Price per metre ≈ metre weight × material cost per kg + покрытие + обработка

Processing may include tube forming, сварка, резка, end treatment, изгиб, inspection and other specified services.

If the supplier quotes material by tonne, convert the tonne basis to kilograms before multiplying by the theoretical mass per metre. The quotation should also clarify whether the coating is already incorporated into the stated weight basis.

Пример: Converting a Tube Specification to Metre Weight

Consider a round tube with an outside diameter of 50.8 мм and a wall thickness of 1.5 мм. The theoretical substrate weight is approximately:

Д: 50.8 мм

t: 1.5 мм

Theoretical steel weight: 0.02466 × 1.5 × (50.8 − 1.5) ≈ 1.82 kg/m

6 m theoretical substrate weight: approximately 10.9 kg before considering coating and manufacturing tolerances.

This is a weight calculation rather than a quotation. To obtain the commercial metre figure, the buyer still needs the applicable substrate basis, спецификация покрытия, processing requirements and delivery terms.

Reference Theoretical Weights by Size

Внешний диаметрТолщина стеныПриблизительно. Steel WeightПриблизительно. 6 m Substrate Weight
25.4 мм1.5 мм0.88 kg/m5.28 кг
38.1 мм1.5 мм1.35 kg/m8.10 кг
50.8 мм1.5 мм1.82 kg/m10.92 кг
60.0 мм2.0 мм2.86 kg/m17.16 кг
76.1 мм2.0 мм3.66 kg/m21.96 кг
101.6 мм2.5 мм6.11 kg/m36.66 кг

These figures are theoretical substrate weights calculated from the dimensional formula and should not be treated as certified finished-product weights. Масса покрытия, actual dimensions, density assumptions and manufacturing tolerances can change the final measured mass.

What Changes the Cost per Metre?

Outside Diameter and Wall Thickness

These two dimensions directly control material consumption. Increasing wall thickness generally produces a larger increase in kg/m because the cross-sectional steel area becomes greater. A larger diameter also increases the amount of material required for each metre when the wall thickness remains constant.

For this reason, comparing two metre quotations without comparing OD and wall thickness can produce a misleading conclusion. The dimensional basis must be identical before the commercial figures can be compared.

Fixed Length

Fixed-length requirements can introduce cutting loss. A standard production length may not divide evenly into the required finished lengths, leaving remnants. Например, an order requiring many short sections can have a different material yield from an order using the same tube in longer sections.

The quotation should state whether cutting loss is incorporated into the per-metre calculation or charged separately.

End Treatment

Plain-cut ends normally require less processing than beveled, deburred, expanded, swaged, flared or otherwise formed ends. If the pipe is supplied as a finished component, end treatment can become a separate processing line in the quotation.

Batch Size

Small production batches may carry a larger setup component per metre because preparation and inspection activities are spread over fewer pieces. Larger compatible orders can distribute certain fixed production costs over more metres and may also improve packing and freight utilization.

The Coating Weight Question

One common mistake is assuming that the theoretical steel weight is automatically the finished coated weight. It is not. A coating adds mass to the substrate, although the exact contribution depends on the coating designation, coating mass, dimensional surface area and the method used to express the coating requirement.

For aluminum-coated steel products, the applicable specification should be checked for whether coating mass is stated as a total of both surfaces, per surface, or under another defined convention. ASTM A463/A463M, for example, defines coating designations and coating-mass requirements for aluminum-coated steel sheet. ([store.astm.org](https://store.astm.org/a0463_a0463m-22.html?utm_source=chatgpt.com))

Procurement check: Ask whether the quoted metre weight represents the theoretical substrate, theoretical finished tube, or actual measured product. If the coating is excluded from the calculation, make sure this is clearly stated.

Theoretical Weight vs Actual Weighing

A quotation may use one of two common settlement methods: theoretical weight или actual scale weight. Neither should be assumed from a per-metre unit alone.

Settlement BasisHow It WorksWhat Buyer Should Confirm
Theoretical weightUses specified dimensions and a defined density/formulaFormula, density, tolerances and coating treatment
Actual weightUses the measured weight of the supplied goodsScale basis, weighing point and acceptable variance
Piece basisFinished pieces are priced according to agreed dimensions and processingFinished length, терпимость, processing and piece count

The difference becomes particularly important for international procurement. A buyer may compare one supplier’s theoretical kg/m calculation with another supplier’s actual-weight settlement and mistakenly assume the underlying material specifications are different.

Who Pays for Short-Length Cutting Loss?

Short-length loss should be addressed before the order is confirmed. If the supplier cuts standard stock into shorter sections, the unused remainder may be treated in several ways: included in the supplier’s yield calculation, charged through a cutting allowance, retained by the supplier, or assigned to the buyer according to the agreed commercial terms.

Do not leave this issue implicit when the order contains large quantities of short pieces. A small difference in yield per stock length can become material across a production run.

Ask: What standard stock length will be used?

Ask: How many finished pieces can be cut from each stock length?

Ask: Who owns usable remnants?

Ask: Is cutting loss included in the quoted metre basis?

What a Per-Metre Quotation Should State

A professional quotation should make the commercial calculation reproducible. Как минимум, request the following information:

Quotation FieldRequired Information
UnitUSD/m, EUR/m, RMB/m or another agreed currency per metre
Product dimensionsOutside diameter × wall thickness × length
Weight basisTheoretical, actual scale weight or finished-piece basis
ПокрытиеТип покрытия, standard and coating mass/designation
ОбработкаРезка, deburring, изгиб, end treatment and inspection
FreightIncluded or excluded; delivery basis and destination
Cutting lossIncluded, separately charged or allocated to buyer

Teda Ganghua Per-Metre Sourcing Support

Теда Ганхуа can help procurement teams build a comparable quotation around the actual tube specification rather than a single unexplained unit figure. Buyers can provide OD, толщина стены, coating requirement, fixed length, quantity and processing requirements, allowing the material and conversion requirements to be evaluated together.

For buyers sourcing aluminized steel tubes, Teda Ganghua can coordinate stock and customized requirements, including cut-to-length specifications where applicable. For a per-metre quotation, buyers can request the theoretical weight, coating basis, processing charge, cutting arrangement and logistics component separately so that the final figure can be checked against the physical specification.

The most reliable comparison is therefore not simply the lowest number per metre. It is a like-for-like calculation based on the same OD, толщина стены, substrate, покрытие, длина, терпимость, обработка, weight settlement method and delivery basis.

Часто задаваемые вопросы

How is the theoretical weight per metre calculated?

For a round steel tube, a commonly used approximation is m ≈ 0.02466 × t × (D − t), where D is outside diameter in millimetres and t is wall thickness in millimetres. The result is the theoretical steel substrate weight in kilograms per metre.

Does the theoretical weight include the aluminum coating?

Не автоматически. The basic formula calculates the steel substrate using a standard density assumption. The quotation should state whether coating mass has been incorporated into the finished weight or handled separately.

Why can two suppliers quote different figures per metre?

The suppliers may be using different substrate grades, толщина стенок, характеристики покрытия, processing charges, cutting yields, batch quantities or settlement methods. They may also quote different delivery bases. Comparing the complete specification is necessary before interpreting the difference.

Should freight be included in the metre figure?

Either approach can be used commercially, but the quotation should state it clearly. For international orders, укажите, указана ли цифра за метр на заводе, ФОБ, СИФ, DDP или другая согласованная основа доставки, чтобы можно было последовательно сравнивать различные предложения..

Как лучше всего запросить пометровую цену??

Укажите внешний диаметр, толщина стены, сорт субстрата, тип и масса покрытия, fixed length, количество, требования к обработке и пункт назначения. Затем попросите поставщика указать единицу измерения., метод теоретического или фактического веса, обработка потерь при резке, расходы на обработку и включена ли фрахт.

Astm A463 Jis G3314 Ru 10346 Алюминированная стальная труба

Алюминированная стальная выхлопная труба