Dx55d+As120 алюминизированная стальная трубка
- Описание
Описание
DX55D+AS120 combines a formable EN 10346 steel substrate with an aluminum-silicon coating. It is designed for applications that need good cold forming, stable mechanical properties, and better heat and oxidation resistance than uncoated carbon steel. Однако, one point should be clarified before purchasing: DX55D is not a 500 MPa yield-strength steel. Under EN 10346, DX55D has a typical proof/yield strength range of about 140–240 MPa and tensile strength of 270–370 MPa. The “550 MPa” level belongs to grades such as S550GD, not DX55D.
Quick answer: DX55D+AS120 is best understood as a high-formability cold-forming substrate + medium Al-Si coating. It is suitable for thin-wall formed tubes, exhaust-related components, heat-exposed parts, agricultural equipment, and selected automotive components where formability and coating performance must work together.
What Does DX55D+AS120 Mean?
The designation contains two separate material requirements. DX55D identifies the steel substrate according to EN 10346. The “D” family is associated with continuously hot-dip coated flat products for cold forming. +КАК identifies an aluminum-silicon coating, пока АС120 indicates a coating-weight class of approximately 120 g/m² total for both sides, subject to the applicable standard, терпимость, and supply agreement.
| Designation | Meaning | Основная функция |
|---|---|---|
| DX55D | В 10346 cold-forming steel grade | Formability and substrate strength |
| +КАК | Алюминий-силиконовое покрытие | Heat and oxidation resistance |
| АС120 | Приблизительно. 120 g/m² coating class | Medium coating protection |
DX55D Is a Forming Grade, Not a 500 MPa Yield Grade
This distinction is important when a tube is specified for structural loading. DX55D belongs to the cold-forming grade family. Its mechanical properties are quite different from a 500 MPa structural steel.
For DX55D+AS products in the EN 10346 data published by ArcelorMittal, the proof/yield strength is about 140–240 MPa, tensile strength is 270–370 MPa, and the minimum A80 elongation is generally 30% for thicknesses from 0.7 к 3 мм. Lower minimum elongation values can apply to thinner products.
| Свойство | DX55D+AS reference | Purchasing note |
|---|---|---|
| Proof/yield strength, Re/Rp0.2 | 140–240 MPa | Not a 500 MPa-class yield steel |
| Предел прочности, Rm | 270–370 MPa | Verify against the mill certificate |
| A80 elongation | ≥30% at 0.7–3 mm | Thickness affects the minimum value |
| Покрытие | AS120 class | Confirm coating-weight basis and tolerance |
Important specification check: If your engineering drawing really requires a ~500 MPa yield strength, DX55D should not be substituted without engineering approval. A structural grade such as S550GD is a different material category and should be specified separately.
How Does the DX Grade Strength Ladder Work?
The DX51D–DX57D sequence is often misunderstood as a simple strength ladder. In reality, these grades are primarily differentiated by cold-forming performance, not by a simple increase in yield strength. As the grade moves toward DX56D and DX57D, formability generally becomes more demanding and elongation requirements increase. DX55D is therefore better described as a strong-formability grade rather than a high-yield structural grade.
| Оценка | General positioning | Typical purpose |
|---|---|---|
| DX51D | General forming | Simple formed parts |
| DX52D | Improved forming | More demanding forming |
| DX53D | Deep-forming level | Deeper formed components |
| DX54D | Very good formability | Complex cold forming |
| DX55D | Special cold-forming grade | Formed parts requiring controlled properties |
| DX56D / DX57D | Higher formability | More demanding forming applications |
Why Combine DX55D with AS120?
The value of this combination comes from using different material features for different jobs. А DX55D substrate provides cold-forming capability, в то время как AS120 coating provides an aluminum-silicon surface that is useful where heat and oxidation resistance are important.
For thin-wall tube production, this can provide a practical balance. The substrate can be roll formed or otherwise shaped before the tube is finished, while the coating helps protect the surface during elevated-temperature service.
DX55D
Cold-forming performance, пластичность, and controlled substrate properties.
АС120
Medium Al-Si coating for heat and oxidation protection.
Finished Tube
A formed thin-wall product for selected industrial service conditions.
Example Specifications for DX55D+AS120 Tube
Tube dimensions depend on the forming route, приложение, and equipment. The following are practical example ranges rather than universal EN 10346 размеры трубки.
| Элемент | Example specification | Примечания |
|---|---|---|
| Материал | DX55D+AS120 | EN 10346-based substrate/coating designation |
| Outside diameter | 20–60 mm | Example range for thin-wall tube programs |
| Толщина стенки | 0.8–2,0 мм | Confirm according to load and forming process |
| Класс покрытия | АС120 | Confirm actual coating mass by inspection |
| Поверхность | Al-Si coated | Appearance depends on production route |
| Supply form | Straight tube or cut length | Custom lengths can be discussed |
Where Is It Used?
Сельскохозяйственная техника is one potential application. Equipment such as tractors, harvesters, implements, guards, каналы, and exhaust-related components can require a combination of low weight, forming capability, and resistance to heat or oxidation.
Automotive components are another important area. Depending on the design, the material can be considered for exhaust-related tubes, тепловые экраны, air or fluid routing components, скобки, and other formed parts. The exact application must be checked against temperature, load, коррозионная среда, and joining requirements.
It can also be considered for selected industrial equipment, Компоненты системы отопления, вентиляции и кондиционирования воздуха, heat-transfer systems, and other thin-wall products where an Al-Si surface is preferred over ordinary uncoated carbon steel.
Welding Considerations
Do not treat DX55D as a conventional 500 MPa high-strength steel that automatically requires heavy preheating. Its EN 10346 mechanical properties are much lower than that description suggests. Welding should instead focus on the actual thickness, joint design, процесс сварки, heat input, and the Al-Si coating.
The coating is the main practical issue. Welding can locally remove or damage the aluminum-silicon layer. Fumes must also be controlled with suitable ventilation and extraction. Where the coating is removed around the weld zone, the exposed steel should be considered for suitable post-weld protection if the service environment requires it.
| Welding issue | Recommended approach |
|---|---|
| Al-Si coating near weld | Control the weld zone and avoid unnecessary coating damage |
| Fume generation | Use effective local exhaust ventilation |
| Thin-wall burn-through | Use controlled heat input and suitable parameters |
| Post-weld corrosion | Inspect exposed areas and apply an approved repair/protection method when required |
| Structural loading | Verify actual substrate strength rather than assuming “DX55D” means 500 MPa yield |
DX55D+AS120 vs a Higher-Strength Structural Grade
The material should be selected according to the real design requirement. If the main priority is forming a thin-wall tube, DX55D can be attractive. If the main requirement is a high structural yield strength, a structural grade such as S350GD or S550GD may be more appropriate, depending on the design. В 10346 lists S550GD at a minimum proof strength of 550 MPa and minimum tensile strength of 560 МПа.
Design rule: Do not choose the grade from the coating name alone. Specify the required сорт субстрата + coating class + размеры трубки + механические свойства + метод формирования + service temperature.
Buying Checklist for DX55D+AS120 Tube
- Confirm that DX55D is actually required for cold forming, rather than assuming it is a 500 MPa structural steel.
- Specify АС120 and confirm the coating-weight basis, терпимость, and inspection method.
- Define outside diameter and wall thickness clearly.
- Request the mill test certificate for substrate chemistry and mechanical properties.
- Check coating quality before tube forming and after forming.
- For welded tubes, define the welding process and post-weld coating protection.
- For automotive or agricultural applications, provide the working temperature and corrosion environment before final grade approval.
DX55D+AS120 Tube Supply from Teda Ganghua
Teda Ganghua can support industrial buyers sourcing Al-Si coated steel tube materials from China. For projects requiring a balance of forming performance and coating protection, the material can be evaluated according to tube diameter, толщина стены, coating class, температура применения, and required mechanical properties.
As a metal supplier, Teda Ganghua can also help coordinate related processing requirements such as cutting, формирование, сварка, and customized tube supply. For buyers comparing different Al-Si coating levels, наш aluminized steel tubes range can be matched to the required substrate and service environment.
For a project inquiry, it is useful to provide the required grade, AS coating level, ОТ, толщина стены, длина трубки, количество, end condition, welding requirement, и приложение. This allows the specification to be checked before quotation.
FAQs
Is DX55D a 500 MPa steel?
Нет. Under EN 10346, DX55D has a proof/yield strength range of about 140–240 MPa and tensile strength of about 270–370 MPa. А 550 MPa minimum yield level is associated with S550GD, not DX55D.
What does AS120 mean?
AS120 refers to an aluminum-silicon coating-weight class of approximately 120 g/m² total for both sides, subject to the applicable standard and agreed tolerances. The exact delivered coating should be verified against the purchase specification.
Is DX55D+AS120 suitable for automotive exhaust components?
It can be considered for selected exhaust and heat-exposed components. Final suitability depends on temperature, термоциклирование, условия коррозии, tube geometry, метод сварки, и требуемый срок службы.
Does DX55D+AS120 require preheating before welding?
Не просто потому, что он называется DX55D.. Это не 500 Высокопрочная подложка класса МПа. Параметры сварки следует выбирать в зависимости от толщины., joint design, процесс, heat input, и влияние сварки на покрытие Al-Si.
Что следует указать при заказе этой трубки?
Укажите марку носителя, Класс покрытия AS120, внешний диаметр, толщина стены, длина трубки, механические требования, требования к поверхности, условия сварки, количество, и предполагаемая среда обслуживания. Эти сведения более достоверны, чем указание только коммерческого названия тубы..



















