Jis G3314 Алюминированная стальная катушка
- Описание
Описание
JIS G3314 aluminized steel coil is the Japanese industrial standard for hot-dip aluminium coated steel sheets and coils. It defines the requirements for aluminium-coated steel used in heat-resistant equipment, automotive components, industrial machinery, и коррозионностойкие применения.
For international buyers working with Japanese engineering drawings or automotive supply chains, understanding JIS G3314 grade symbols, coating types, механические требования, and certification requirements helps avoid specification mistakes.
What Is JIS G3314 Aluminized Steel?
JIS G3314 specifies hot-dip aluminium coated steel sheets and coils, known in Japanese as 熱浸アルミめっき鋼板. The standard focuses on steel products coated with aluminium to improve heat resistance, стойкость к окислению, и защита от коррозии.
Compared with ordinary galvanized steel, aluminized steel uses an aluminium-based coating that can form a stable aluminium oxide protective layer when exposed to elevated temperatures.
| Стандартный | Описание |
|---|---|
| ОН G3314 | Hot-dip aluminium coated steel sheets and coils |
| Coating Method | Hot-dip aluminium coating |
| Main Properties | Термостойкость, стойкость к окислению, защита от коррозии |
JIS G3314 Grade Symbol Explained
The JIS G3314 grade system uses symbols to identify coating type and application characteristics. The main grades are SA1C and SA1D.
| Symbol | Meaning |
|---|---|
| С | Стальной основной материал |
| А | Aluminium coating |
| 1 | Aluminium coating type classification |
| C/D | Application and performance category |
SA1C and SA1D: Two Main JIS G3314 Types
The biggest difference between SA1C and SA1D is the coating composition and intended application.
| Оценка | Coating Type | Основная особенность |
|---|---|---|
| SA1C | Aluminium-silicon coating | Устойчивость к высокотемпературному окислению |
| SA1D | Aluminium coating | Corrosion protection and surface durability |
SA1C is commonly selected for heat-resistant components, while SA1D is used where aluminium coating corrosion protection is the main requirement.
JIS G3314 Grade Classification
JIS G3314 may include different quality levels depending on forming requirements and application needs.
| Оценка | Application Focus | Typical Requirement |
|---|---|---|
| SA1C-1 | Heat-resistant components | Standard forming and thermal performance |
| SA1C-2 | More demanding forming parts | Improved processing requirements |
Mechanical Properties of JIS G3314 Aluminized Steel
Mechanical requirements depend on steel grade, толщина, and product category. Typical inspection focuses on tensile strength, yield behavior, удлинение, and forming performance.
| Свойство | Inspection Purpose |
|---|---|
| Предел прочности | Confirms structural performance |
| Предел текучести | Evaluates deformation resistance |
| Удлинение | Determines forming capability |
| Вес покрытия | Verifies aluminium protection level |
JIS G3314 Coating Weight Requirements
The coating weight requirement is an important quality factor because it directly influences heat resistance and service life.
| Объект проверки | Цель |
|---|---|
| Coating Mass Measurement | Confirm aluminium coating quantity |
| Surface Inspection | Check coating defects |
| Тест на адгезию | Confirm coating stability after forming |
JIS G3314 vs ASTM A463 vs EN Aluminized Steel
International projects often use different standards for similar aluminium coated steel products. Buyers should confirm equivalent grades before ordering.
| System | Стандартный | Common Classification |
|---|---|---|
| Japan | ОН G3314 | SA1C / SA1D |
| USA | АСТМ А463 | Тип 1 / Тип 2 |
| Europe | В 10346 | DX + AS grades |
JIS G3314 Purchasing and Certification Guide
For Japanese engineering projects, buyers should request complete documentation including grade designation, coating classification, размеры, механические свойства, and inspection records.
• Material Test Certificate
• Chemical composition report
• Mechanical property report
• Coating weight inspection result
• JIS compliance confirmation
Teda Ganghua JIS G3314 Aluminized Steel Coil Supply
Teda Ganghua provides aluminized steel solutions for international customers requiring specification matching, документация по качеству, and customized processing support. For projects requiring reliable катушка из алюминизированной стали, technical assistance is available for JIS, АСТМ, and EN standard selection.
FAQ About JIS G3314 Aluminized Steel Coil
1. What is JIS G3314?
JIS G3314 is the Japanese standard for hot-dip aluminium coated steel sheets and coils.
2. What is the difference between SA1C and SA1D?
SA1C uses aluminium-silicon coating mainly for heat resistance, while SA1D focuses more on corrosion protection.
3. Is JIS G3314 equivalent to ASTM A463?
JIS G3314 and ASTM A463 cover similar aluminized steel products, но символы оценок и требования необходимо тщательно сравнивать..
4. Какие документы следует запросить для материала JIS G3314?
Покупатели должны запросить сертификаты на материалы., отчеты о проверке покрытия, и протоколы механических испытаний.
5. Где используется алюминизированная сталь JIS G3314?
Общие области применения включают автомобильные компоненты., термостойкое оборудование, industrial machinery, и термозащитные детали.

















