Овальная алюминизированная стальная труба

Описание

Ordering an oval aluminized steel pipe requires more than stating the outside profile. For an accurate quotation and production, the long axis, short axis, толщина стены, длина, and Al-Si coating grade should be written together. A complete specification also helps prevent misunderstandings between buyers, engineers, and suppliers.

How to Write a Complete Oval Pipe Specification

The recommended ordering format is:

Long Axis × Short Axis × Wall Thickness × Length × Coating

Пример: 50 × 25 × 1.5 mm × 6,000 mm × AS150

Each item has a specific purpose. The long and short axes define the elliptical profile. Wall thickness controls weight, stiffness, and forming behavior. Length defines the supply condition. The coating grade identifies the required Al-Si protection level.

Oval Aluminized Pipe Specification Sheet

ЭлементTypical Ordering DetailWhy It Matters
ProfileОвал / эллиптическийDefines the cross-section
Long axis30–100 mm examplesControls overall profile width
Short axis15–50 mm examplesControls profile height
Толщина стенки0.8–3.0 mm typical examplesAffects strength and weight
ДлинаCommonly 6,000 ммDetermines cutting and shipping requirements
Покрытие Al-SiАС60 / АС80 / АС120 / АС150 / AS200Defines coating weight and protection level

The dimensions above are common ordering examples, not a universal standard size list. Actual availability depends on the manufacturing route, оснастка, steel substrate, спецификация покрытия, and production quantity.

Common Oval Sizes for Inquiry

Long AxisShort AxisExample WallExample LengthPossible Coating
30 мм15 мм1.0 мм6,000 ммАС60 / АС80
40 мм20 мм1.2 мм6,000 ммАС80 / АС120
50 мм25 мм1.5 мм6,000 ммАС120 / АС150
60 мм30 мм1.5–2,0 мм6,000 ммАС120 / АС150
80 мм40 мм2.0 мм6,000 ммАС150 / AS200
100 мм50 мм2.0–3,0 мм6,000 ммАС150 / AS200

For custom profiles, a technical drawing is preferred. The drawing should show the outside dimensions, толщина стены, corner or radius requirements, length tolerance, coating grade, and any special processing.

The Best Way to Write an Actual Purchase Order

A short product name such as “oval aluminized pipe” is not enough for production. A complete purchase description can be written as follows:

Продукт: Oval aluminized steel pipe

Profile: 50 × 25 мм

Толщина стенки: 1.5 мм

Длина: 6,000 мм

Покрытие: AS150 Al-Si coating

Стальная подложка: To be confirmed according to application

Quantity: 2,000 pcs

This format is much safer than sending only a keyword. It allows the supplier to calculate material consumption, confirm tooling, check production feasibility, and prepare a quotation on the same specification.

Oval Pipe vs Round Pipe: Why Is the Cost Different?

An oval section can cost more than a standard round section even when the steel grade and coating are similar. The main reason is production complexity.

Cost FactorRound PipeOval Pipe
ToolingUsually standardizedMay require dedicated tooling
ФормированиеRelatively simpleMore profile control is required
Dimensional controlGenerally easierLong/short axis must both be controlled
Small ordersOften more economicalTooling cost can have a greater effect
Custom profilesLimited additional workPotential tooling and setup premium

Поэтому, the oval-to-round price difference is not a fixed percentage. For a standard stocked profile, the premium may be limited. For a new custom profile, tooling and setup costs can become much more important. Larger production quantities can also spread tooling costs across more pieces.

Procurement tip: When comparing an oval pipe with a round pipe, compare the same wall thickness, длина, substrate, coating grade, количество, и требования к обработке. Otherwise, the quoted price difference may not reflect the profile cost itself.

Oval Pipe for Exhaust or Decoration?

The required specification should also be based on the final application.

For Exhaust Systems

Oval sections are useful where installation space is limited. The flattened profile can provide more packaging flexibility than a round section. Typical uses include selected automotive exhaust components, tail sections, and other formed exhaust parts.

For exhaust service, the buyer should confirm the operating temperature, термоциклирование, gas environment, толщина стены, метод сварки, and coating grade. A higher coating grade alone does not create a universal high-temperature rating.

For Decorative and Structural Uses

Oval profiles are also used for handrails, furniture frames, guards, display structures, and selected equipment frames. In these cases, appearance, dimensional consistency, гибкость, состояние поверхности, and coating appearance can be more important than high-temperature performance.

For decorative applications, a lower or medium coating grade may be sufficient when the service environment is dry and mild. For outdoor or more corrosive conditions, the coating specification should be selected according to the actual exposure.

How to Order Custom Oval Aluminized Pipe

For a quotation, buyers should provide the following information:

  • Long axis and short axis
  • Толщина стенки
  • Required length or random length
  • Al-Si coating grade
  • Steel substrate or required mechanical properties
  • Quantity in pieces or total weight
  • Application and working environment
  • Сварка, изгиб, резка, flaring, or other processing requirements
  • Dimensional tolerances
  • Inspection or certification requirements

If the profile is not a standard size, a CAD drawing or dimensional sketch should be attached. This is especially important when the oval shape has special radii, tight tolerances, or downstream forming requirements.

Source Oval Aluminized Steel Pipe for Industrial Projects

Teda Ganghua can support buyers who need aluminized steel tubes for different industrial applications. Supply can be evaluated by profile size, толщина стены, длина, Al-Si coating grade, and required processing. For custom oval sections, buyers can provide a drawing so the production route, tooling requirements, and quotation can be checked before an order is placed.

For project purchasing, it is also useful to confirm the required quantity, delivery length, метод упаковки, документы проверки, and whether cutting or other fabrication is needed. This helps keep the quotation aligned with the actual finished requirement rather than only the raw tube specification.

Часто задаваемые вопросы

1. What is the correct ordering format for oval aluminized pipe?

The clearest format is long axis × short axis × wall thickness × length × coating grade. Например: 50 × 25 × 1.5 mm × 6,000 mm × AS150.

2. Is oval pipe more expensive than round pipe?

It can be. Dedicated tooling, формирование, настраивать, and dimensional control may add cost. The premium depends on profile, количество, tooling status, и требования к обработке.

3. What oval sizes are commonly requested?

Примеры включают в себя 30 × 15, 40 × 20, 50 × 25, 60 × 30, 80 × 40, и 100 × 50 мм. These are representative sizes rather than a universal standard range.

4. Which coating grade should be specified?

АС60, АС80, АС120, АС150, and AS200 can be considered depending on corrosion exposure, температура, service duration, and cost requirements. The correct grade should be selected from the actual application rather than from coating weight alone.

5. Do I need a drawing for a custom oval pipe?

Да. A drawing is strongly recommended for non-standard profiles. It should show the long axis, short axis, толщина стены, radii, допуски, длина, покрытие, and any post-forming requirements.

Стальная труба с покрытием из сплава Al-Si

Алюминированная труба из углеродистой стали