As200 เหล็กม้วนอลูมิไนซ์

คำอธิบาย

AS200 aluminized steel coil represents one of the heaviest standard aluminium-silicon coating classes for applications requiring extended heat resistance, ป้องกันการเกิดออกซิเดชัน, และอายุการใช้งานยาวนาน. With a nominal coating mass of 200 g/m², AS200 provides a thicker protective aluminium-silicon layer compared with common grades such as AS120 and AS150.

For high-temperature equipment, ส่วนประกอบเตาอุตสาหกรรม, boiler-related parts, and long-term thermal applications, AS200 is selected when durability is more important than minimum material usage.

What Does AS200 Mean in Aluminized Steel?

The AS200 designation refers to an aluminium-silicon coating classification with a nominal total coating weight of approximately 200 g/m² on both sides. The heavier coating creates a thicker aluminium-rich protective layer, improving resistance against oxidation during long-term heat exposure.

รายการAS200 Specification
ประเภทการเคลือบAluminium-silicon alloy coating
Nominal Coating Weight200 g/m² total coating mass
Approximate ThicknessAround 28–33 μm per side
ข้อได้เปรียบหลักMaximum coating durability for severe service

Why Choose AS200 for Long-Life Heat Resistance?

The main purpose of AS200 is extending the protection period of steel exposed to continuous thermal cycling. During high-temperature operation, aluminium in the coating reacts with oxygen and forms a stable aluminium oxide layer, which slows further oxidation.

A heavier coating provides more aluminium material available for this protective process. ส่งผลให้, AS200 can maintain protection longer than lighter coating classes when operating conditions are demanding.

AS200 Key Benefits:
• Long-term oxidation resistance
• Suitable for continuous high-temperature environments
• Extended component service life
• Reduced replacement frequency for heat-exposed parts

Typical Applications of AS200 Aluminized Steel

AS200 is mainly used for equipment where failure caused by oxidation can lead to frequent maintenance or production interruption.

แอปพลิเคชันReason for Using AS200
Boiler tube protection coversImproved oxidation resistance during long operation
Industrial exhaust ductsBetter durability under heat exposure
High-temperature furnace componentsSupports longer thermal service cycles
อุปกรณ์อบแห้งทางการเกษตรHandles repeated heating conditions

AS200 vs AS150: Heat Resistance Comparison

AS150 is already widely used for exhaust and heating applications, but AS200 provides additional coating thickness for more severe operating environments.

การเปรียบเทียบAS150AS200
น้ำหนักการเคลือบ150 g/m²200 g/m²
Approximate Thickness21–25 μm/side28–33 μm/side
การป้องกันการเกิดออกซิเดชันStandard high-temperature protectionExtended high-temperature protection
อายุการใช้งานNormal industrial cyclesLonger thermal service cycles

In similar operating environments, AS200 may provide approximately 1.3–1.5 times longer oxidation resistance compared with AS150, depending on temperature, atmosphere, and component design.

Processing Considerations for AS200

The thicker coating improves durability but also affects fabrication behavior. During severe forming operations, excessive bending stress may damage the coating layer.

Manufacturers should consider:

  • Suitable bending radius selection
  • Controlled forming pressure
  • Avoiding sharp-angle deformation
  • Checking coating integrity after fabrication
Processing Factorคำแนะนำ
การงอUse appropriate bending radius
Deep formingEvaluate coating flexibility before production
Surface inspectionCheck for coating cracks after forming

AS200 Material Selection vs Cost Consideration

Compared with AS150, AS200 requires more aluminium-silicon coating material. The additional coating weight generally increases material consumption, but it can reduce maintenance frequency in long-life applications.

FactorAS150AS200
Coating Amount150 g/m²200 g/m²
Material Usageมาตรฐานสูงกว่า
Selection PriorityBalanced performanceMaximum service life

AS200 Aluminized Steel Coil Purchasing Guide

When purchasing AS200 material, buyers should confirm coating classification, ขนาด, mechanical properties, and application conditions.

Recommended Specification Items:
• AS200 coating classification
• Steel grade and thickness
• Coil width and weight requirements
• Surface quality requirements
• Inspection documentation

Teda Ganghua AS200 Aluminized Steel Coil Supply

Teda Ganghua provides aluminized steel solutions for customers requiring high-temperature performance, coating selection support, and customized processing services. For demanding applications requiring reliable ขดลวดเหล็กอลูมิไนซ์, technical support is available for material evaluation and application matching.

FAQ About AS200 Aluminized Steel Coil

1. What is AS200 aluminized steel coating?

AS200 is a heavy aluminium-silicon coating class with approximately 200 g/m² total coating mass on both sides.

2. Why choose AS200 instead of AS150?

AS200 provides a thicker coating layer and is selected when longer high-temperature oxidation resistance is required.

3. Is AS200 suitable for forming?

ใช่, but thicker coatings require careful forming control and suitable bending radius to protect coating integrity.

4. Where is AS200 commonly used?

AS200 ใช้ในส่วนประกอบหม้อไอน้ำ, ท่ออุตสาหกรรม, ชิ้นส่วนเตา, และอุปกรณ์ระบายความร้อนที่มีอายุการใช้งานยาวนาน.

5. ควรตรวจสอบคุณภาพการเคลือบ AS200 อย่างไร?

การทดสอบน้ำหนักการเคลือบ, การตรวจสอบพื้นผิว, และเอกสารทางเทคนิคมักใช้สำหรับการตรวจสอบคุณภาพ.

Jis G3314 เหล็กม้วนอลูมิไนซ์

Jis G3314 เหล็กม้วนอลูมิไนซ์