- Sự miêu tả
Sự miêu tả
AS200 is the heavy-coating end of the aluminized steel pipe range. With a nominal coating weight of about 200 g/m -mét, it provides a larger protective coating reserve than AS150 and other lighter grades. It is intended for demanding environments where corrosion, nhiệt, and service conditions place higher requirements on the coated surface. Tuy nhiên, the heaviest coating is not automatically the best choice for every application.
What Does AS200 Mean?
Các AS designation refers to the nominal coating weight. AS200 generally indicates approximately 200 g/m² of total aluminum-silicon coating on both sides, subject to the applicable standard and tolerance.
| Cấp | Xấp xỉ. coating weight | Position | sử dụng điển hình |
|---|---|---|---|
| AS120 | ~120 g/m² | Trung bình-cao | Moderate industrial exposure |
| AS150 | ~150 g/m² | Mid-high | Hot and wet service |
| AS200 | ~200 g/m² | Heavy coating | Heavy-duty corrosion and heat exposure |
AS200 is therefore positioned at the upper end of this coating sequence. The exact grade structure varies by standard and manufacturer, so the purchase order should identify the applicable specification rather than relying on the AS number alone.
Why Choose AS200?
The main reason to move to AS200 is the need for a larger coating reserve. A heavier Al-Si coating provides more material between the environment and the steel substrate.
Corrosion Margin
More coating material can provide a larger reserve in demanding atmospheric conditions.
Heat Exposure
The aluminized surface is suited to selected elevated-temperature applications when the complete system is properly specified.
Service Margin
The heavier coating can provide additional protection when AS150 does not provide enough environmental margin.
AS200 should therefore be viewed as a heavy-duty coating option, not simply as a more expensive version of AS150.
AS200 Coating Thickness: Around 50 μm or More
Coating weight cannot be converted into one exact thickness value because coating density, alloy structure, process conditions, and measurement position all affect the result.
For AS200-level aluminized steel, an indicative coating thickness can be around 50 μm or more. The actual measured value should be controlled by the applicable product specification and inspection method.
Heavy Coating Also Creates a Processing Challenge
A thicker aluminized coating provides more protective material, but it also requires more attention during forming. The Al-Si coating and its alloyed interface can be less forgiving when the tube is heavily deformed.
Sharp bending, aggressive expansion, and excessive flaring can create coating cracks or local damage. The risk depends on tube geometry, cấu trúc lớp phủ, forming radius, dụng cụ, nhiệt độ, and the specific manufacturing route.
Bending Protection
Use an appropriate bend radius and controlled forming process. Avoid unnecessary sharp bends that can place excessive strain on the coated surface.
Flaring and Expansion
Tube expansion and flaring should be performed with suitable tooling and controlled deformation. Excessive expansion can damage the coating around the formed area.
Cutting and End Processing
Cutting exposes the steel substrate at the tube end. For demanding environments, the exposed area may require an appropriate protection or finishing method based on the final application.
| Processing operation | Main risk | Recommended approach |
|---|---|---|
| uốn | Coating cracking or local damage | Use controlled forming and suitable bend radius |
| Mở rộng | Local coating strain | Control expansion ratio and tooling |
| Flaring | Surface cracking at the formed end | Use gradual forming and inspect the finished area |
| Cắt | Exposed steel at the cut edge | Apply suitable edge protection when required |
Typical AS200 Applications
AS200 is most useful where the tube faces a combination of elevated temperature and environmental exposure. It can be considered for demanding industrial systems when the coating and substrate are compatible with the operating conditions.
| Ứng dụng | Why AS200 can be considered | Critical check |
|---|---|---|
| Industrial flues | Higher coating reserve for demanding atmospheric exposure | Nhiệt độ, hóa chất khí, ngưng tụ |
| Bộ trao đổi nhiệt | Balances thermal exposure and surface protection | Fluid chemistry and operating temperature |
| Boiler accessories | Useful for selected high-temperature components | Temperature cycle and applicable equipment requirements |
| Severe exhaust systems | Heavy coating provides additional protection margin | Peak temperature, ngưng tụ, gas composition |
For very severe service, the coating grade alone is not enough. The steel substrate, welding method, thermal cycle, atmosphere, and component design must also be reviewed.
AS200 vs AS150: When Is the Upgrade Worth It?
The move from AS150 to AS200 should be based on a clear performance requirement. A heavier coating adds material cost, so it should provide a useful benefit in the actual application.
| Condition | AS150 | AS200 | Preferred direction |
|---|---|---|---|
| Moderate industrial exposure | Usually sufficient | May be unnecessary | AS150 |
| Hot and wet service | Good candidate | More coating reserve | Application-specific |
| High corrosion demand | May be limiting | Better margin | AS200 |
| Severe exhaust environment | Requires verification | Strong candidate | AS200 if temperature and coating system are suitable |
| Complex tube forming | Generally easier to manage | Greater forming attention required | Review processing before upgrading |
AS200 Cost: The Top of the Coating Ladder
Because AS200 uses substantially more coating material than AS120 and AS150, it normally sits at the higher end of the coating cost range. As an indicative commercial comparison, AS200 can be around 15–25% more expensive than AS120, depending on tube dimensions, steel base, order quantity, production conditions, and market factors.
This percentage should be treated as a budgeting reference rather than a fixed market premium. Actual quotations can differ significantly between suppliers and project specifications.
| Cấp | Relative coating cost | Cost logic |
|---|---|---|
| AS120 | Thấp hơn | Suitable when medium-high protection is enough |
| AS150 | Trung bình-cao | Balanced coating for demanding service |
| AS200 | Highest | Justified when additional coating reserve is required |
Salt Spray and Service Life
Salt spray testing can help compare coating systems under the same controlled laboratory conditions. Tuy nhiên, AS200 salt-spray hours should not be converted directly into outdoor service years.
Actual service life depends on humidity, tiếp xúc với clorua, pollutants, nhiệt độ, coating damage, tube geometry, cut edges, and maintenance. A meaningful comparison should use the same test method, chuẩn bị mẫu vật, tình trạng lớp phủ, and failure criterion.
The main practical advantage of AS200 is its higher coating reserve. It should not be marketed as having a universal number of salt-spray hours or a guaranteed outdoor lifetime.
Procurement Checklist for AS200 Pipe
Specify AS200, coating weight, sức chịu đựng, and inspection method.
Confirm outside diameter, độ dày của tường, chiều dài, and dimensional tolerances.
State continuous temperature, nhiệt độ cao nhất, và chu trình nhiệt.
Describe humidity, muối, hóa chất, ngưng tụ, và phơi nhiễm ngoài trời.
Confirm bending, flaring, expansion, hàn, cắt, and end-treatment requirements.
Define material certificates, coating inspection, dimensional reports, and other quality documents.
AS200 Tube Supply: Stock and Project Orders
Teda Ganghua supports international buyers sourcing aluminized steel tubes for industrial, thermal, exhaust, and fabrication projects. For AS200 requirements, buyers can specify the tube dimensions, mác thép, coating weight, yêu cầu bề mặt, Số lượng, tài liệu kiểm tra, and downstream processing needs.
For projects that require quick delivery, available stock can be checked together with production requirements. For larger projects, bulk quantities can be evaluated to determine whether AS150 or AS200 provides the better overall cost-performance balance.
Buyers can review the available ống thép tráng nhôm and provide the required size, AS200 coating level, Số lượng, and delivery requirements for a project-specific quotation.
AS200 Aluminized Steel Pipe FAQs
1. What is AS200 aluminized steel pipe?
AS200 generally refers to an aluminized coating weight of about 200 g/m² total on both sides. The exact value and tolerance must be confirmed against the applicable standard.
2. How thick is an AS200 coating?
An indicative coating thickness can be around 50 μm or more, but actual thickness depends on coating density, kết cấu, process control, and measurement method. The specified coating weight should be used for procurement control.
3. Is AS200 better than AS150?
AS200 provides a higher coating weight and a larger coating reserve. It is preferable when the service environment or project specification requires more protection. AS150 may be more economical when its performance is sufficient.
4. Can AS200 pipe be bent and flared?
Đúng, but forming must be controlled. Heavy aluminized coatings can be susceptible to cracking or local damage under excessive deformation. Bán kính uốn cong, dụng cụ, expansion ratio, and final surface inspection should be considered.
5. Is AS200 suitable for high-temperature service?
It can be considered for selected high-temperature applications, nhưng không có mức nhiệt độ chung chỉ dựa trên ký hiệu AS200. Mác thép, hệ thống sơn, atmosphere, thermal cycle, và thời gian phục vụ đều phải được đánh giá.



















