- 描述
描述
热浸镀铝钢管: Quality Indicators, 涂层厚度 & Inspection Methods
Hot dipped aluminized steel pipe is a corrosion- and heat-resistant steel product coated by immersing carbon steel into a molten aluminum or aluminum-silicon bath. Its performance is highly dependent on coating weight, adhesion quality, and metallurgical structure.
For industrial buyers, especially in automotive exhaust, heat exchange, and furnace systems, understanding coating grade and inspection methods is critical for ensuring long-term reliability.
1. Coating Weight Grades (AS80 / AS120 / AS150)
| 涂料级 | 涂料重量 (克/平方米) | 典型性能 |
|---|---|---|
| AS80 | ~80 g/m² | Light-duty corrosion protection, 暖通空调系统 |
| AS120 | ~120 克/平方米 | Standard automotive exhaust and industrial piping |
| AS150 | ~150 g/m² | Heavy-duty high-temperature and aggressive environments |
Higher coating weight improves corrosion resistance but may slightly reduce formability in tight bending applications.
2. Key Quality Indicators for Buyers
| Indicator | Requirement |
|---|---|
| Coating Uniformity | No visible bare spots or uneven thickness |
| Adhesion Strength | No peeling under bending or impact deformation |
| 表面状况 | Smooth Al-Si layer with minimal pinholes or rough particles |
| 耐热性 | Stable performance at 600–800°C operating conditions |
A consistent coating layer is essential for long-term durability in thermal cycling environments.
3. 涂层厚度 & 测试方法
| Test Method | 目的 |
|---|---|
| Magnetic Thickness Gauge | Non-destructive measurement of coating thickness |
| Metallographic Analysis | Cross-section observation of coating layers and diffusion zone |
| Weight Method (Gravimetric) | Determines coating mass per unit area (AS grade verification) |
| Salt Spray Test | Accelerated corrosion resistance evaluation |
These methods ensure compliance with industrial and automotive quality standards.
4. Mechanical & Forming Performance Tests
| Test Type | Evaluation Purpose |
|---|---|
| Bending Test | Evaluates coating adhesion under deformation (no cracking or peeling) |
| Flanging Test | Assesses edge formability for exhaust system fabrication |
| Impact Test | Checks coating integrity under mechanical stress |
Good aluminized pipe should maintain coating integrity even after severe forming operations.
5. Common Defects in Poor-Quality Products
| Defect | Risk |
|---|---|
| Pinholes | Local corrosion initiation points |
| Uneven coating thickness | Reduced lifespan in weak zones |
| Peeling or flaking | Loss of thermal and corrosion protection |
| Brittle intermetallic layer | Cracking during bending or installation |
6. Application Overview
| Industry | 应用 |
|---|---|
| 汽车 | 排气管, 消声器, catalytic systems |
| 工业供暖 | Furnace and high-temperature gas pipelines |
| 暖通空调系统 | Ventilation and thermal ducting |
| Energy Systems | Flue gas and heat recovery lines |
7. 买家为何选择泰达港华
在 Teda Ganghua, we supply hot dipped aluminized steel pipes with controlled AS coating grades (AS80–AS150), 稳定的附着性能, 以及工业应用严格的检验标准.
我们提供OEM加工, 切割, 弯曲, 为全球客户提供全程出口包装服务.
在此探索我们的镀铝钢管产品:
渗铝钢管产品
结论
热浸镀铝钢管质量由镀层重量决定, 附着力, 和结构完整性. 通过厚度测量进行正确检查, 金相学, 和弯曲测试确保在苛刻的工业环境中具有可靠的性能.


















