الأنابيب الفولاذية البيضاوية بالألمنيوم

وصف

Ordering an oval aluminized steel pipe requires more than stating the outside profile. For an accurate quotation and production, the long axis, short axis, سمك الجدار, طول, and Al-Si coating grade should be written together. A complete specification also helps prevent misunderstandings between buyers, engineers, and suppliers.

How to Write a Complete Oval Pipe Specification

The recommended ordering format is:

Long Axis × Short Axis × Wall Thickness × Length × Coating

مثال: 50 × 25 × 1.5 mm × 6,000 mm × AS150

Each item has a specific purpose. The long and short axes define the elliptical profile. Wall thickness controls weight, stiffness, and forming behavior. Length defines the supply condition. The coating grade identifies the required Al-Si protection level.

Oval Aluminized Pipe Specification Sheet

غرضTypical Ordering DetailWhy It Matters
Profileبيضاوي / بيضاوي الشكلDefines the cross-section
Long axis30–100 mm examplesControls overall profile width
Short axis15–50 mm examplesControls profile height
Wall thickness0.8–3.0 mm typical examplesAffects strength and weight
طولCommonly 6,000 ممDetermines cutting and shipping requirements
طلاء السيAS60 / AS80 / AS120 / AS150 / AS200Defines coating weight and protection level

The dimensions above are common ordering examples, not a universal standard size list. Actual availability depends on the manufacturing route, الأدوات, steel substrate, مواصفات الطلاء, and production quantity.

Common Oval Sizes for Inquiry

Long AxisShort AxisExample WallExample LengthPossible Coating
30 مم15 مم1.0 مم6,000 ممAS60 / AS80
40 مم20 مم1.2 مم6,000 ممAS80 / AS120
50 مم25 مم1.5 مم6,000 ممAS120 / AS150
60 مم30 مم1.5-2.0 ملم6,000 ممAS120 / AS150
80 مم40 مم2.0 مم6,000 ممAS150 / AS200
100 مم50 مم2.0-3.0 ملم6,000 ممAS150 / AS200

For custom profiles, a technical drawing is preferred. The drawing should show the outside dimensions, سمك الجدار, corner or radius requirements, length tolerance, coating grade, and any special processing.

The Best Way to Write an Actual Purchase Order

A short product name such as “oval aluminized pipe” is not enough for production. A complete purchase description can be written as follows:

Product: Oval aluminized steel pipe

Profile: 50 × 25 مم

Wall thickness: 1.5 مم

طول: 6,000 مم

طلاء: AS150 Al-Si coating

الركيزة الفولاذية: To be confirmed according to application

Quantity: 2,000 pcs

This format is much safer than sending only a keyword. It allows the supplier to calculate material consumption, confirm tooling, check production feasibility, and prepare a quotation on the same specification.

Oval Pipe vs Round Pipe: Why Is the Cost Different?

An oval section can cost more than a standard round section even when the steel grade and coating are similar. The main reason is production complexity.

Cost FactorRound PipeOval Pipe
ToolingUsually standardizedMay require dedicated tooling
تشكيلRelatively simpleMore profile control is required
Dimensional controlGenerally easierLong/short axis must both be controlled
Small ordersOften more economicalTooling cost can have a greater effect
Custom profilesLimited additional workPotential tooling and setup premium

لذلك, the oval-to-round price difference is not a fixed percentage. For a standard stocked profile, the premium may be limited. For a new custom profile, tooling and setup costs can become much more important. Larger production quantities can also spread tooling costs across more pieces.

Procurement tip: When comparing an oval pipe with a round pipe, compare the same wall thickness, طول, substrate, coating grade, كمية, and processing requirements. Otherwise, the quoted price difference may not reflect the profile cost itself.

Oval Pipe for Exhaust or Decoration?

The required specification should also be based on the final application.

For Exhaust Systems

Oval sections are useful where installation space is limited. The flattened profile can provide more packaging flexibility than a round section. Typical uses include selected automotive exhaust components, tail sections, and other formed exhaust parts.

For exhaust service, the buyer should confirm the operating temperature, ركوب الدراجات الحرارية, gas environment, سمك الجدار, welding method, and coating grade. A higher coating grade alone does not create a universal high-temperature rating.

For Decorative and Structural Uses

Oval profiles are also used for handrails, furniture frames, guards, display structures, and selected equipment frames. In these cases, appearance, dimensional consistency, القدرة على الانحناء, surface condition, and coating appearance can be more important than high-temperature performance.

For decorative applications, a lower or medium coating grade may be sufficient when the service environment is dry and mild. For outdoor or more corrosive conditions, the coating specification should be selected according to the actual exposure.

How to Order Custom Oval Aluminized Pipe

For a quotation, buyers should provide the following information:

  • Long axis and short axis
  • Wall thickness
  • Required length or random length
  • Al-Si coating grade
  • Steel substrate or required mechanical properties
  • Quantity in pieces or total weight
  • Application and working environment
  • لحام, الانحناء, قطع, إحراق, or other processing requirements
  • Dimensional tolerances
  • Inspection or certification requirements

If the profile is not a standard size, a CAD drawing or dimensional sketch should be attached. This is especially important when the oval shape has special radii, tight tolerances, or downstream forming requirements.

Source Oval Aluminized Steel Pipe for Industrial Projects

Teda Ganghua can support buyers who need أنابيب الصلب بالألمنيوم for different industrial applications. Supply can be evaluated by profile size, سمك الجدار, طول, Al-Si coating grade, and required processing. For custom oval sections, buyers can provide a drawing so the production route, tooling requirements, and quotation can be checked before an order is placed.

For project purchasing, it is also useful to confirm the required quantity, delivery length, طريقة التعبئة, وثائق التفتيش, and whether cutting or other fabrication is needed. This helps keep the quotation aligned with the actual finished requirement rather than only the raw tube specification.

التعليمات

1. What is the correct ordering format for oval aluminized pipe?

The clearest format is long axis × short axis × wall thickness × length × coating grade. على سبيل المثال: 50 × 25 × 1.5 mm × 6,000 mm × AS150.

2. Is oval pipe more expensive than round pipe?

It can be. Dedicated tooling, تشكيل, يثبت, and dimensional control may add cost. The premium depends on profile, كمية, tooling status, and processing requirements.

3. What oval sizes are commonly requested?

تشمل الأمثلة 30 × 15, 40 × 20, 50 × 25, 60 × 30, 80 × 40, و 100 × 50 مم. These are representative sizes rather than a universal standard range.

4. Which coating grade should be specified?

AS60, AS80, AS120, AS150, and AS200 can be considered depending on corrosion exposure, درجة حرارة, service duration, and cost requirements. The correct grade should be selected from the actual application rather than from coating weight alone.

5. Do I need a drawing for a custom oval pipe?

نعم. A drawing is strongly recommended for non-standard profiles. It should show the long axis, short axis, سمك الجدار, radii, التسامح, طول, طلاء, and any post-forming requirements.

أنابيب الصلب المطلية بسبائك السي

أنابيب الصلب الكربوني بالألمنيوم