Tubo de acero aluminizado ovalado
- Descripción
Descripción
Ordering an oval aluminized steel pipe requires more than stating the outside profile. For an accurate quotation and production, the long axis, short axis, espesor de pared, longitud, and Al-Si coating grade should be written together. A complete specification also helps prevent misunderstandings between buyers, engineers, and suppliers.
How to Write a Complete Oval Pipe Specification
The recommended ordering format is:
Long Axis × Short Axis × Wall Thickness × Length × Coating
Ejemplo: 50 × 25 × 1.5 mm × 6,000 mm × AS150
Each item has a specific purpose. The long and short axes define the elliptical profile. Wall thickness controls weight, stiffness, and forming behavior. Length defines the supply condition. The coating grade identifies the required Al-Si protection level.
Oval Aluminized Pipe Specification Sheet
| Artículo | Typical Ordering Detail | Why It Matters |
|---|---|---|
| Profile | Oval / elíptico | Defines the cross-section |
| Long axis | 30–100 mm examples | Controls overall profile width |
| Short axis | 15–50 mm examples | Controls profile height |
| Grosor de la pared | 0.8–3.0 mm typical examples | Affects strength and weight |
| Longitud | Commonly 6,000 milímetros | Determines cutting and shipping requirements |
| Revestimiento de Al-Si | AS60 / AS80 / AS120 / AS150 / AS200 | Defines coating weight and protection level |
The dimensions above are common ordering examples, not a universal standard size list. Actual availability depends on the manufacturing route, estampación, sustrato de acero, especificación de recubrimiento, and production quantity.
Common Oval Sizes for Inquiry
| Long Axis | Short Axis | Example Wall | Example Length | Possible Coating |
|---|---|---|---|---|
| 30 milímetros | 15 milímetros | 1.0 milímetros | 6,000 milímetros | AS60 / AS80 |
| 40 milímetros | 20 milímetros | 1.2 milímetros | 6,000 milímetros | AS80 / AS120 |
| 50 milímetros | 25 milímetros | 1.5 milímetros | 6,000 milímetros | AS120 / AS150 |
| 60 milímetros | 30 milímetros | 1.5–2,0 milímetros | 6,000 milímetros | AS120 / AS150 |
| 80 milímetros | 40 milímetros | 2.0 milímetros | 6,000 milímetros | AS150 / AS200 |
| 100 milímetros | 50 milímetros | 2.0–3,0 milímetros | 6,000 milímetros | AS150 / AS200 |
For custom profiles, a technical drawing is preferred. The drawing should show the outside dimensions, espesor de pared, corner or radius requirements, length tolerance, coating grade, and any special processing.
The Best Way to Write an Actual Purchase Order
A short product name such as “oval aluminized pipe” is not enough for production. A complete purchase description can be written as follows:
Producto: Oval aluminized steel pipe
Profile: 50 × 25 milímetros
Grosor de la pared: 1.5 milímetros
Longitud: 6,000 milímetros
Revestimiento: AS150 Al-Si coating
Sustrato de acero: To be confirmed according to application
Quantity: 2,000 pcs
This format is much safer than sending only a keyword. It allows the supplier to calculate material consumption, confirm tooling, check production feasibility, and prepare a quotation on the same specification.
Oval Pipe vs Round Pipe: Why Is the Cost Different?
An oval section can cost more than a standard round section even when the steel grade and coating are similar. The main reason is production complexity.
| Cost Factor | Round Pipe | Oval Pipe |
|---|---|---|
| Tooling | Usually standardized | May require dedicated tooling |
| formando | Relatively simple | More profile control is required |
| Dimensional control | Generally easier | Long/short axis must both be controlled |
| Small orders | Often more economical | Tooling cost can have a greater effect |
| Custom profiles | Limited additional work | Potential tooling and setup premium |
Por lo tanto, the oval-to-round price difference is not a fixed percentage. For a standard stocked profile, the premium may be limited. For a new custom profile, tooling and setup costs can become much more important. Larger production quantities can also spread tooling costs across more pieces.
Procurement tip: When comparing an oval pipe with a round pipe, compare the same wall thickness, longitud, substrate, coating grade, cantidad, y requisitos de procesamiento. Otherwise, the quoted price difference may not reflect the profile cost itself.
Oval Pipe for Exhaust or Decoration?
The required specification should also be based on the final application.
For Exhaust Systems
Oval sections are useful where installation space is limited. The flattened profile can provide more packaging flexibility than a round section. Typical uses include selected automotive exhaust components, tail sections, and other formed exhaust parts.
For exhaust service, the buyer should confirm the operating temperature, ciclo térmico, gas environment, espesor de pared, método de soldadura, and coating grade. A higher coating grade alone does not create a universal high-temperature rating.
For Decorative and Structural Uses
Oval profiles are also used for handrails, furniture frames, guards, display structures, and selected equipment frames. En estos casos, appearance, dimensional consistency, flexibilidad, condición de la superficie, and coating appearance can be more important than high-temperature performance.
For decorative applications, a lower or medium coating grade may be sufficient when the service environment is dry and mild. For outdoor or more corrosive conditions, the coating specification should be selected according to the actual exposure.
How to Order Custom Oval Aluminized Pipe
For a quotation, buyers should provide the following information:
- Long axis and short axis
- Grosor de la pared
- Required length or random length
- Al-Si coating grade
- Steel substrate or required mechanical properties
- Quantity in pieces or total weight
- Application and working environment
- Soldadura, doblando, corte, resplandeciente, or other processing requirements
- Dimensional tolerances
- Inspection or certification requirements
If the profile is not a standard size, a CAD drawing or dimensional sketch should be attached. This is especially important when the oval shape has special radii, tight tolerances, or downstream forming requirements.
Source Oval Aluminized Steel Pipe for Industrial Projects
Teda Ganghua can support buyers who need tubos de acero aluminizado for different industrial applications. Supply can be evaluated by profile size, espesor de pared, longitud, Al-Si coating grade, and required processing. For custom oval sections, buyers can provide a drawing so the production route, tooling requirements, and quotation can be checked before an order is placed.
For project purchasing, it is also useful to confirm the required quantity, delivery length, método de embalaje, documentos de inspección, and whether cutting or other fabrication is needed. This helps keep the quotation aligned with the actual finished requirement rather than only the raw tube specification.
Preguntas frecuentes
1. What is the correct ordering format for oval aluminized pipe?
The clearest format is long axis × short axis × wall thickness × length × coating grade. Por ejemplo: 50 × 25 × 1.5 mm × 6,000 mm × AS150.
2. Is oval pipe more expensive than round pipe?
It can be. Dedicated tooling, formando, configuración, and dimensional control may add cost. The premium depends on profile, cantidad, tooling status, y requisitos de procesamiento.
3. What oval sizes are commonly requested?
Los ejemplos incluyen 30 × 15, 40 × 20, 50 × 25, 60 × 30, 80 × 40, y 100 × 50 milímetros. These are representative sizes rather than a universal standard range.
4. Which coating grade should be specified?
AS60, AS80, AS120, AS150, and AS200 can be considered depending on corrosion exposure, temperatura, service duration, and cost requirements. The correct grade should be selected from the actual application rather than from coating weight alone.
5. Do I need a drawing for a custom oval pipe?
Sí. A drawing is strongly recommended for non-standard profiles. It should show the long axis, short axis, espesor de pared, radii, tolerancias, longitud, revestimiento, and any post-forming requirements.



















