Tubo de acero aluminizado Sa1c As80

Descripción

SA1C+AS80 combines a general-purpose steel substrate with a standard Al-Si coating. In the JIS-oriented aluminized steel system, this combination is positioned as an entry-level option for ordinary tube applications. It can be considered when moderate corrosion protection, practical forming, and controlled cost are more important than maximum coating weight or higher substrate performance.

What Does SA1C+AS80 Mean?

The designation contains two separate parts:

SA1C = ordinary-grade steel substrate

AS80 = approximately 80 g/m² total Al-Si coating weight, subject to the applicable specification and tolerance

The steel provides the basic mechanical structure. The aluminum-silicon coating provides improved oxidation and corrosion resistance compared with uncoated carbon steel in suitable environments.

It is important to keep the two designations separate. SA1C describes the substrate, while AS80 describes the coating. Changing AS80 to AS120 increases coating protection, but it does not change the underlying steel grade. Likewise, upgrading the substrate to SA1D does not automatically increase the coating weight.

Entry-Level JIS Combination for General Tubes

SA1C+AS80 is best viewed as a practical starting combination for ordinary service. It is suitable when the tube does not require unusually high mechanical properties, severe corrosion resistance, or the highest coating grade.

ArtículoSA1C+AS80 ReferenceProcurement Meaning
SustratoSA1COrdinary-grade steel base
RevestimientoAS80Standard Al-Si coating level
Typical positioningEntry / general purposeBalanced initial specification
FormaRedondo, oval, or other tube profilesConfirm production capability
ServicioGeneral indoor / outdoor useEnvironment must be checked
Coating basisgramos/m²Confirm exact standard and tolerance

The term “standard coating” here means a practical middle-entry coating level in the requested grade sequence. It should not be interpreted as a universal JIS requirement that every SA1C product must use AS80.

Typical SA1C+AS80 Tube Specifications

Actual dimensions depend on the tube manufacturing route and application. The following values can be used as practical inquiry examples:

ProfileExample SizeEspesor de la paredLongitudRevestimiento
Round tube25 mm OD1.0 milímetros6,000 milímetrosAS80
Round tube38.1 mm OD1.2 milímetros6,000 milímetrosAS80
Round tube50.8 mm OD1.5 milímetros6,000 milímetrosAS80
Oval tube50 × 25 milímetros1.5 milímetros6,000 milímetrosAS80

These are example specifications rather than fixed standard dimensions. For non-standard profiles, the buyer should provide a drawing showing the outside dimensions, espesor de pared, tolerancias, longitud, and required coating.

Where Is SA1C+AS80 Used?

The combination is suitable for applications where ordinary steel strength and a moderate Al-Si coating are sufficient.

Exhaust Tubes

Selected exhaust components and general exhaust tube applications where the actual temperature and atmosphere remain within the material design limits.

General Parts

Brackets, guards, equipment components, supports, and other ordinary fabricated parts.

Interior & Exterior

General indoor service and selected outdoor applications where corrosion exposure is not especially severe.

For exhaust applications, temperature should be checked separately. The AS80 designation alone does not establish a universal continuous-use temperature. Thermal cycling, atmosphere, tube wall thickness, substrate, formando, soldadura, and coating condition all affect performance.

When Should You Upgrade to AS120?

AS120 is a logical upgrade when the main concern is more coating protection rather than higher substrate strength.

RequirementSA1C+AS80Consider SA1C+AS120
Mild environmentGood starting pointMay be unnecessary
More outdoor exposureCheck carefullyMore suitable candidate
Higher corrosion concernLimited marginBetter coating margin
Cost-sensitive general partsPreferred starting optionUpgrade if justified

Salt-spray results should also be compared only under the same test method, preparación de muestras, exposure conditions, and failure criteria. Test hours should not be converted directly into a guaranteed outdoor service life.

When Should You Upgrade to SA1D?

Changing from SA1C to SA1D is a different decision. It concerns the sustrato de acero, not simply the coating.

SA1D should be considered when the application requires a different substrate performance level, forming behavior, or specification requirement. If the project specification calls for a particular mechanical property or forming grade, the substrate designation should be selected first. The coating grade can then be selected separately.

Simple upgrade rule: Need more surface protection? Consider moving from AS80 to AS120. Need different substrate performance? Review SA1C versus SA1D. Need both? Specify the upgraded substrate and coating together.

SA1C+AS80 Ordering Example

A clear inquiry should avoid using only the product name. A complete example can be written as:

Producto: SA1C+AS80 aluminized steel tube

Profile: Redondo

Tamaño: 50.8 mm OD × 1.5 mm WT

Longitud: 6,000 milímetros

Revestimiento: AS80

Quantity: 2,000 pcs

Solicitud: General exhaust / fabricated component

This information gives the supplier enough detail to check dimensions, production feasibility, requisitos de recubrimiento, packing, and delivery conditions.

SA1C+AS80 Aluminized Tube in Stock

For standard sizes, stock availability can be an important advantage when a project needs short delivery. Teda Ganghua can support inquiries for tubos de acero aluminizado by checking available profiles, dimensiones, grados de recubrimiento, and quantities.

For repeat industrial orders, buyers can also specify the required substrate, AS coating grade, OD or profile dimensions, espesor de pared, longitud, cantidad, documentos de inspección, y requisitos de procesamiento. This allows stocked material and production orders to be evaluated against the same technical specification.

SA1C+AS80 vs SA1C+AS120 vs SA1D+AS80

CombinationMain ChangeTypical Reason to Choose
SA1C+AS80Entry substrate + standard coatingGeneral-purpose, cost-conscious applications
SA1C+AS120Higher coating levelMore coating protection is required
SA1D+AS80Different substrate gradeSubstrate properties or forming requirements drive the choice

The best combination is therefore determined by the application, not by the coating grade alone. A lower-cost specification can be appropriate when the service environment is mild. An upgrade is justified when the actual operating conditions require additional performance.

Preguntas frecuentes

1. What does SA1C+AS80 mean?

SA1C identifies the ordinary steel substrate, while AS80 identifies the Al-Si coating level. They describe different parts of the product specification.

2. Is SA1C+AS80 suitable for exhaust pipe?

It can be suitable for selected general exhaust applications, but operating temperature, ciclo térmico, atmosphere, espesor de pared, and coating condition must be checked before selection.

3. Should I choose AS120 instead of AS80?

Consider AS120 when additional coating protection is needed. The decision should be based on corrosion exposure and service conditions rather than coating weight alone.

4. What is the difference between upgrading AS80 and upgrading SA1C?

AS80 a AS120 cambia el nivel de recubrimiento. SA1C a SA1D cambia la especificación del sustrato. Resuelven diferentes requerimientos de ingeniería.

5. ¿Se puede suministrar el tubo SA1C+AS80 en stock??

Los tamaños estándar pueden estar disponibles en stock., dependiendo de las dimensiones, perfil, revestimiento, y cantidad. Los compradores deben proporcionar las especificaciones completas para que se pueda comprobar con precisión el stock actual..

Tubería de acero al carbono aluminizado

Tubería de acero recubierta de aleación Al-Si