Bobine d'acier aluminisé As150

Description

AS150 aluminized steel coil is one of the most widely selected aluminium-silicon coating classes for industrial heat-resistant applications. With a nominal coating mass of 150 g/m², it provides a strong balance between oxidation resistance, coating durability, and manufacturing efficiency.

For automotive exhaust systems, équipement de chauffage, fours, and high-temperature industrial components, AS150 is often considered a practical standard choice because it delivers reliable protection without requiring the heaviest coating level.

What Does AS150 Mean in Aluminized Steel?

The AS150 designation refers to an aluminium-silicon coating class under the aluminized steel coating system. The number “150” represents the nominal total coating mass on both surfaces.

ArticleAS150 Specification
Type de revêtementAluminium-silicon alloy coating
Nominal Coating Weight150 g/m² total coating mass
Approximate ThicknessAbout 21–25 μm per side
Caractéristique principaleHigh-temperature oxidation protection

The actual coating thickness depends on production conditions, coating distribution, and measurement location. Donc, coating mass inspection is normally used for acceptance verification.

Why AS150 Became the Common Industrial Standard

The popularity of AS150 comes from the balance between protection performance and practical manufacturing requirements. A lighter coating may reduce protection time, while a heavier coating increases material consumption and may not provide additional value for normal service conditions.

Key Advantages of AS150:
• Suitable for continuous heat exposure environments
• Strong resistance against oxidation
• Good coating stability during forming
• Balanced choice for large-volume industrial production

In many exhaust and heating applications, the operating temperature can approach around 600–700°C. AS150 provides sufficient aluminium protection for these environments while maintaining good processability.

Typical Applications of AS150 Aluminized Steel

AS150 is widely used where steel components must resist repeated heating cycles and oxidation.

ApplicationWhy AS150 Is Selected
Automotive exhaust mufflersProtects against high-temperature oxidation
Coques de convertisseur catalytiqueMaintains durability under heat cycles
Boiler componentsImproves oxidation resistance
Oven and grill partsProvides heat-resistant surface protection

AS150 vs AS120 vs AS200 Comparison

Different coating classes are selected according to temperature exposure, exigences de durée de vie, and environmental severity.

Coating ClassEnviron. ÉpaisseurProtection LevelTypical Selection
AS12017–20 μm/sideBalanced protectionGeneral industrial components
AS15021–25 μm/sideStandard high protectionExhaust and heating systems
AS200Higher than AS150Heavy-duty protectionSevere environments

AS150 Coating Uniformity and Edge Effect

During continuous coating production, coating distribution must be carefully controlled. One common inspection point is the edge effect, where coating thickness near the strip edge may differ from the center area.

For critical applications, buyers should confirm:

  • Coating weight test results
  • Thickness measurement positions
  • Surface condition across the coil width
  • Coating adhesion after forming

A visually smooth surface does not always guarantee uniform coating weight, so technical inspection documents are important for industrial purchasing.

AS150 Aluminized Steel Coil Purchasing Guide

A complete purchasing specification should include the coating class, nuance d'acier, dimensions, exigences mécaniques, et les exigences en matière d'inspection.

Required InformationBut
Coating ClassConfirm AS150 requirement
Thickness and WidthMatch forming and fabrication equipment
Propriétés mécaniquesEnsure application performance
Inspection ReportVerify coating quality

Teda Ganghua AS150 Aluminized Steel Coil Supply

Teda Ganghua provides aluminized steel solutions for customers requiring stable coating grades, customized specifications, and industrial processing support. For projects requiring reliable bobine d'acier aluminisé, professional assistance is available for coating selection, technical confirmation, and production requirements.

FAQ About AS150 Aluminized Steel Coil

1. What is AS150 aluminized steel coating?

AS150 is an aluminium-silicon coating class with a nominal coating mass of 150 g/m² on both sides combined.

2. Why is AS150 widely used?

AS150 offre un équilibre pratique entre la résistance à l'oxydation, coating durability, and manufacturing efficiency.

3. À quelle température l'acier aluminisé AS150 peut-il être manipulé?

AS150 est couramment sélectionné pour les applications impliquant une exposition à haute température, y compris les composants d'échappement et de chauffage.

4. Quelle est la différence entre AS120 et AS150?

L'AS150 a un revêtement plus épais et offre une protection contre l'oxydation plus longue que l'AS120.

5. Comment vérifier la qualité du revêtement AS150?

Test de masse de revêtement, mesure d'épaisseur, inspection des surfaces, et la documentation qualité sont couramment utilisées pour la vérification.

Bobine d'acier aluminisé As60

Bobine d'acier aluminisé As60