Astm A787 アルミメッキ鋼管

説明

ASTM A787 is the mechanical-tubing specification to know when aluminized steel tubing needs a defined resistance-welded construction, metallic coating, chemistry, 寸法, and mechanical performance. The current ASTM listing identifies A787/A787M-24 as the active edition. It covers electric-resistance-welded carbon-steel mechanical tubing in round, 四角, 長方形, and special shapes, including tubing produced from aluminum-coated steel sheet. It is therefore a finished-tubing standard rather than simply a sheet specification.

Important distinction: A787 does not cover seamless aluminized mechanical tubing. Its scope is specifically electric-resistance-welded metallic-coated carbon steel mechanical tubing. If seamless mechanical tubing is required, a different seamless tubing specification must be selected and the coating requirement specified separately.

What Is ASTM A787 Tubing?

ASTM A787/A787M is titled Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing. The specification covers round, 四角, 長方形, and special-shape tubing. It includes products made from aluminum-coated steel sheet as well as other metallic-coated steel sheet products.

The standard is designed around mechanical tubing, not electrical conduit or pressure pipe. That makes the specification particularly relevant to fabricated components where dimensional accuracy, mechanical properties, surface protection, 形にする, and appearance are more important than pressure containment.

製造業

Electric-resistance welded construction.

材料

Carbon-steel mechanical tubing with a specified metallic coating.

形

ラウンド, 四角, 長方形, and special shapes.

応用

Mechanical, 構造的な, 自動車, exhaust-related and general fabricated components.

Does A787 Cover Aluminum-Coated Steel?

はい. A787 includes mechanical tubing produced from aluminum-coated carbon steel sheet. The same specification also covers other metallic-coated products, including galvanized, 合金化溶融亜鉛めっき, 55% aluminum-zinc alloy-coated, and zinc-aluminum-magnesium alloy-coated steel.

This makes A787 useful when the purchaser wants the coating and tube construction addressed in one mechanical-tubing specification. For aluminum-coated tubing, しかし, the coating designation still needs to be clearly stated in the purchase order.

A787 coating routeBasic descriptionTypical reason for selection
アルミニウムコーティングCarbon steel sheet coated with aluminum before tube formingCorrosion and heat-related surface protection
Galvanized after weldingTubing welded first and zinc-coated afterwardGeneral zinc-based corrosion protection
亜鉛メッキ / galvannealed sheet routeProduced from metallic-coated steel sheetCorrosion protection and fabrication requirements
55% aluminum-zinc alloy coatedAl-Zn alloy-coated steel feedstockDifferent coating-performance balance
Zn-Al-Mg coatedZinc-aluminum-magnesium coated feedstockAlternative corrosion-protection system

A787 Type, コーティング, and Grade Are Different Things

One of the easiest purchasing mistakes is to treat the words タイプ, コーティング, そして grade as interchangeable. They identify different parts of the specification.

A787 provides various types and grades. The type identifies the tubing/coating construction, while the steel grade is associated with the required chemical composition. For tubing produced from precoated sheet, the coating designation is tied to the applicable sheet specification. The standard’s ordering information calls for the purchaser to identify the type, ASTM designation, coating designation, coating treatment, 応用, steel chemical requirements where applicable, 形, 寸法, and length.

Purchase itemWhat it controlsExample of what buyer should state
A787/A787MTubing standardRequired edition and SI or inch-pound designation
タイプTubing/coating constructionApplicable A787 type/code
Coating designationCoating requirementApplicable A463 aluminum coating designation
鋼種Base-metal chemistry and propertiesRequired A787 grade or agreed steel chemistry
DimensionsFinished-tube geometryOD × WT, ID × WT, or square/rectangular dimensions

A787 and A463: Sheet Standard to Tube Standard

ASTM A463 and ASTM A787 are complementary rather than competing specifications. A463 covers aluminum-coated steel sheet. A787 covers electric-resistance-welded metallic-coated carbon steel mechanical tubing that can be produced from aluminum-coated sheet. A787 specifically references A463/A463M for the coating designation of aluminum-coated sheet used as precoated feedstock.

A463/A463M
Aluminum-coated steel sheet

→

スリッティング + 形にする
Coated strip becomes tube profile

→

A787/A787M
Finished ERW mechanical tubing

This relationship is particularly important when a buyer sees both standards on a material certificate. The A463 reference identifies the aluminum-coated sheet used as feedstock, while A787 defines the finished mechanical-tubing requirements.

Does ASTM A787 Cover Seamless Tubing?

いいえ. A787 is an electric-resistance-welded tubing specification. Its scope specifically describes ERW carbon-steel mechanical tubing. It should therefore not be used as a generic substitute for “aluminized mechanical tube” when the customer requires seamless construction.

For comparison, ASTM A519/A519M is a separate specification for seamless carbon and alloy steel mechanical tubing, including hot-finished and cold-finished seamless products. It is not the same construction route as A787.

Buyer check: If a supplier quotes “ASTM A787 seamless aluminized tubing,” request clarification. The A787 standard itself specifies electric-resistance-welded mechanical tubing, so “seamless” and “A787” do not describe the same manufacturing route.

A787 Mechanical and Chemical Requirements

A787 does more than define the coating. It also establishes requirements for the carbon-steel substrate, including chemical composition and product-analysis provisions, together with dimensional tolerances for the tubing. The standard states that the product is available in various grades based on chemical requirements.

For mechanical-tubing procurement, this means the coating should not be considered separately from the steel substrate. A tube can have the correct aluminum coating but still be unsuitable if the base-metal chemistry, 強さ, 寸法, forming condition, or intended fabrication does not match the project requirement.

Requirement areaWhat to verify
Chemical composition炭素, マンガン, phosphorus, sulfur and other specified elements according to the ordered grade
コーティングApplicable coating specification and designation
Wall thicknessNominal/ordered thickness and applicable tolerance
直径Outside diameter or maximum outside dimension and tolerance
Mechanical performanceRequired grade and applicable mechanical-property requirements
Weld conditionERW seam, flash condition and any special finishing requirement

A787 Tube Sizes and Shapes

The A787 scope covers round, 四角, 長方形, and special-shape mechanical tubing. The A787/A787M-20a scope lists outside diameters or maximum outside dimensions from 1/2 に 15 で. [12.7 に 380 mm] と壁の厚さ 0.028 に 0.180 で. [0.70 に 4.60 mm]; other sizes can be ordered when the remaining requirements are met. The applicable current edition should always be confirmed for a production order.

Tube shapeDimensions normally specifiedCommon procurement concern
ラウンドの, ID, or WT combinationDiameter tolerance and weld flash
四角Outside dimension, WT, corner radiusSquareness and corner geometry
RectangularOutside dimensions, WT, corner radiusDimension and corner tolerances
Special shapeCustomer-defined profileDrawing approval and forming consistency

Where A787 Aluminized Tubing Is Used

The mechanical-tubing design of A787 makes it suitable for fabricated components rather than pressure-service piping. Aluminum-coated versions are particularly relevant where the steel needs a protective aluminum surface and the tube must be formed into a practical mechanical profile.

Exhaust-related components

Useful where aluminized steel is selected for heat and corrosion considerations, subject to the actual temperature cycle.

Structural tube

ラウンド, 四角, rectangular and special profiles can support frames and fabricated assemblies.

General engineering

Suitable for mechanical components where coated carbon-steel tubing provides the required balance of strength and surface protection.

Fabricated equipment

Can be specified for guards, supports, brackets and formed assemblies where the coating is part of the corrosion-control strategy.

A787 for Exhaust Applications: Check the Temperature First

Aluminized mechanical tubing is frequently considered for exhaust-related applications, but A787 compliance alone does not make a tube suitable for every exhaust location. The buyer should evaluate peak temperature, continuous temperature, condensate exposure, 壁の厚さ, 曲げ, weld position, and the selected aluminum coating system.

For a hot-end component, the coating type and thermal environment can be more important than simply selecting the A787 designation. For a cooler exhaust section, corrosion resistance and condensate exposure may become the dominant concerns.

Exhaust procurement formula: A787 + tube grade + aluminum coating designation + OD × WT + 長さ + weld requirement + temperature profile + inspection requirement.

How to Write an A787 Purchase Order

A vague inquiry such as “ASTM A787 aluminized tube” leaves too many variables open. A better purchase description identifies the A787 type, コーティング, 鋼グレード, 幾何学, finish, そしてアプリケーション.

Recommended procurement format

• ASTM A787/A787M: specify required edition

• Type/code: specify the applicable A787 tubing type

• Coating: aluminum-coated steel; state the applicable A463/A463M coating designation

• Steel grade: specify the required A787 grade/chemical requirement

• Shape: round, 四角, 長方形, or special

• Dimensions: OD × WT, ID × WT, or profile dimensions

• Length: mill or definite cut length

• Flash condition: controlled or standard as required

• Surface condition: chemically treated, dry/oiled, or other agreed condition

• Application: exhaust, 構造的な, mechanical, or other fabrication requirement

A787’s own ordering information calls for the type/code and description, ASTM specification designation, coating designation and type of coating, chemical treatment, 表面状態, customer application, steel chemical requirements where applicable, 形, 寸法, and length.

Teda Ganghua Support for A787 Aluminized Tubing

For buyers sourcing coated mechanical tubing from China, Teda Ganghua can review the complete A787 requirement rather than quoting from the keyword alone. The inquiry can include tube shape, の, 壁の厚さ, 長さ, aluminum coating designation, base-steel grade, 成形要件, 溶接条件, 塗布温度, and inspection documents.

For sourcing and quotation, see ASTM A787 aluminized steel tubing. Providing the A787 type and required coating designation together helps the supplier distinguish the finished-tube standard from the A463 sheet coating requirement and prepare the correct material documentation.

ASTM A787 Quick Reference

QuestionA787 answer
Is it a tubing standard?はい, for metallic-coated carbon-steel mechanical tubing.
Is the tube welded?はい. The standard covers electric-resistance-welded tubing.
Does it include aluminum-coated tubing?はい, including tubing produced from aluminum-coated steel sheet.
Does it cover seamless tube?いいえ.
What shapes are available?ラウンド, 四角, 長方形, and special shapes.
What does A463 do?It provides the applicable aluminum-coated sheet coating requirements used as precoated feedstock.
What must the buyer specify?タイプ, coating designation, grade, 形, 寸法, 長さ, treatment, 表面状態, and application as applicable.

FAQs About ASTM A787 Aluminized Steel Tubing

What is ASTM A787 used for?

ASTM A787/A787M is used for electric-resistance-welded metallic-coated carbon-steel mechanical tubing. It covers round, 四角, 長方形, and special shapes and includes aluminum-coated steel tubing.

Does ASTM A787 cover aluminized steel pipe?

It covers aluminum-coated mechanical tubing, but it is not a general pressure-pipe standard. Its scope is ERW carbon-steel mechanical tubing. If the project requires pressure-containing pipe, a different ASTM pipe specification should be evaluated.

What is the relationship between A787 and A463?

A463 is the aluminum-coated steel sheet specification, while A787 is the finished ERW metallic-coated mechanical-tubing specification. For tubing made from precoated aluminum-coated sheet, A787 references the applicable A463/A463M coating designation.

Is ASTM A787 seamless?

いいえ. A787/A787M は特に電縫溶接機械チューブをカバーします. シームレス機械チューブは、該当する場合、ASTM A519/A519M などの他の仕様に属します。.

A787 アルミニウムコーティングチューブはどのように注文すればよいですか?

A787/A787M のエディションを記載する, 適用可能なタイプ/コード, aluminum coating designation, 鋼グレード, チューブ形状, 外径と肉厚, 長さ, 表面状態, フラッシュ要件, 意図された用途, および検査/文書化要件. これにより、サプライヤーは材料キーワードだけではなく、完全な機械チューブ仕様を得ることができます。.

Al-Si被覆鋼管

アルミめっき軟鋼管