Proses Aluminisasi Hot-Dip: Bagaimana Tiub Keluli Beralum Dihasilkan

Proses Aluminisasi Hot-Dip: Bagaimana Tiub Keluli Beralum Dihasilkan

Hot-dip aluminizing adalah salah satu teknologi salutan yang paling boleh dipercayai untuk pembuatan paip keluli alumin berprestasi tinggi. By immersing prepared steel into molten aluminum-silicon alloy, the process creates a metallurgically bonded coating that combines the strength of carbon steel with outstanding heat resistance, rintangan pengoksidaan, dan perlindungan kakisan.

Unlike paint or electroplated coatings that adhere mechanically, hot-dip aluminizing forms an intermetallic diffusion layer between the steel substrate and the aluminum coating. This metallurgical bond is the reason aluminized steel tubes are widely used in automotive exhaust systems, relau industri, penukar haba, Salur HVAC, and high-temperature ventilation equipment.

Why Hot-Dip Aluminizing Is Different

The coating is not simply deposited on the steel surface. During immersion, iron and aluminum atoms diffuse into each other, creating several alloy layers with different functions.

LapisanMain Function
Outer Aluminum LayerProvides corrosion resistance and heat reflection
Al-Si Alloy LayerImproves coating stability and crack resistance
Fe-Al Diffusion LayerCreates strong metallurgical bonding
Steel SubstrateProvides mechanical strength and toughness

Complete Hot-Dip Aluminizing Process Flow

The manufacturing process consists of several tightly controlled stages. Each step directly affects coating adhesion, thickness uniformity, and final service life.

LangkahMain EquipmentTujuan
1. Steel Strip PreparationCoil UncoilerPrepare raw steel strip
2. Penyahgris & PembersihanCleaning LineRemove rolling oil and contaminants
3. PenjerukanAcid TankRemove oxide scale and rust
4. FluxingFlux BathPrevent oxidation before coating
5. Pengeringan & PreheatingDrying FurnaceImprove coating adhesion
6. Panas-Dip AluminizingMolten Al-Si BathForm aluminum coating
7. Kawalan Pisau UdaraAir Knife SystemControl coating thickness
8. MenyejukkanCooling SectionStabilize coating structure
9. Tube Forming & KimpalanTube MillConvert strip into steel pipe
10. Final InspectionInspection LineVerify quality before shipment

Langkah 1 – Steel Strip Preparation

Production begins with high-quality carbon steel coils. Uniform thickness, flatness, and chemical composition are essential because the coating quality depends heavily on the substrate.

Common substrate grades include:

  • ASTM A53
  • ASTM A36
  • ASTM A106
  • S235
  • DIN St37

Langkah 2 – Degreasing and Surface Cleaning

Rolling lubricants, gris, habuk, and other contaminants are removed using alkaline cleaning systems. Any remaining contamination can cause coating defects such as pinholes or poor adhesion.

Langkah 3 – Acid Pickling

The cleaned steel strip passes through controlled acid pickling tanks to remove mill scale and oxidation.

A clean metallic surface is necessary for proper metallurgical bonding during aluminizing.

Langkah 4 – Fluxing

After pickling, the strip enters a flux bath that protects the steel surface from oxidation before immersion into molten aluminum.

Flux treatment improves wetting characteristics and helps produce a continuous coating.

Langkah 5 – Drying and Preheating

The steel strip is dried and preheated before entering the aluminizing bath.

Typical objectives include:

  • Keluarkan kelembapan
  • Reduce thermal shock
  • Improve coating consistency

Langkah 6 – Immersion in the Molten Aluminum-Silicon Bath

This is the core stage of the process.

The steel strip is immersed into molten aluminum containing approximately 90% aluminum and 8–11% silicon.

Typical Process ParameterNilai Biasa
Suhu Mandian680–720°C
Kandungan AluminiumKira -kira 90%
Kandungan Silikon8–11%
Coating MethodContinuous Hot-Dip Process

Silicon plays an important role by controlling the growth of brittle iron-aluminum intermetallic compounds. Tanpa silikon, excessively thick alloy layers may become brittle.

Langkah 7 – Air Knife Thickness Control

Immediately after leaving the molten bath, high-pressure air knives remove excess molten aluminum.

This operation controls:

  • Coating thickness
  • Surface smoothness
  • Weight consistency
  • Appearance quality

Langkah 8 – Controlled Cooling

The coated strip is cooled under carefully controlled conditions to stabilize the coating microstructure.

Proper cooling minimizes thermal stress while maintaining coating adhesion.

Langkah 9 – Tube Forming and Welding

Selepas salutan, the aluminized strip enters a tube mill where it is progressively formed into round tubing.

High-frequency welding joins the strip edges to produce continuous pipe suitable for industrial applications.

Langkah 10 – Inspection and Quality Control

Every production batch is inspected before shipment.

Typical quality inspections include:

  • Pengukuran ketebalan lapisan
  • Surface appearance inspection
  • Bending test
  • Adhesion evaluation
  • Dimension verification
  • Weld quality inspection

Critical Manufacturing Equipment Throughout the Process

peralatanPrimary Function
Cleaning LineSurface preparation
Pickling TankOxide removal
Flux StationSurface activation
Preheating FurnaceTemperature stabilization
Al-Si BathCoating formation
Air Knife SystemThickness control
Cooling SectionMicrostructure stabilization
Tube Forming MillPipe production

Advantages of the Hot-Dip Aluminizing Process

  • Excellent coating adhesion through metallurgical bonding.
  • High heat resistance for temperatures approaching 700–800°C (taip 1 salutan).
  • Outstanding oxidation resistance.
  • Improved corrosion resistance compared with uncoated carbon steel.
  • Excellent heat reflectivity for thermal management applications.
  • Long service life in demanding industrial environments.

Typical Applications of Hot-Dip Aluminized Steel Pipes

  • Sistem ekzos automotif
  • Tiub relau industri
  • Penukar haba
  • Boiler components
  • Sistem saluran HVAC
  • Peralatan pengeringan pertanian
  • Industrial ventilation pipelines

Teda Ganghua Hot-Dip Aluminized Steel Tube Solutions

Teda Ganghua supplies aluminized steel tubes manufactured for demanding industrial environments where heat resistance, perlindungan kakisan, and long service life are required. With professional processing capabilities, customized dimensions, pemotongan ketepatan, and strict quality inspection, Teda Ganghua supports customers across automotive, pemanasan industri, HVAC, agricultural equipment, and heavy manufacturing industries.

Whether the application requires standard aluminized tubing or customized processing services, Teda Ganghua helps customers select suitable coating types, substrate grades, and dimensions for long-term operational performance.

Learn more about our
tiub keluli beraluminium
solutions.

Soalan yang sering ditanya

Why is silicon added to the aluminum bath?

Silicon controls the growth of brittle iron-aluminum intermetallic compounds, producing a stronger and more stable coating.

What is the typical temperature of the hot-dip aluminizing bath?

Industrial hot-dip aluminizing baths typically operate between 680°C and 720°C depending on the production process.

How is coating thickness controlled?

Air knife systems precisely remove excess molten aluminum immediately after immersion, producing a uniform coating thickness.

What industries use hot-dip aluminized steel pipes?

Major industries include automotive manufacturing, relau industri, penukar haba, Sistem HVAC, and high-temperature processing equipment.

Why is hot-dip aluminizing preferred over ordinary coatings?

Because the coating forms a metallurgical bond with the steel substrate, it offers significantly better adhesion, rintangan haba, and long-term durability than mechanically bonded coatings.

Kongsi siaran ini