Tubo de aço aluminizado por imersão a quente
- Descrição
Descrição
Tubo de aço aluminizado por imersão a quente: Quality Indicators, Espessura do revestimento & Inspection Methods
Hot dipped aluminized steel pipe is a corrosion- and heat-resistant steel product coated by immersing carbon steel into a molten aluminum or aluminum-silicon bath. Its performance is highly dependent on coating weight, adhesion quality, and metallurgical structure.
For industrial buyers, especially in automotive exhaust, troca de calor, and furnace systems, understanding coating grade and inspection methods is critical for ensuring long-term reliability.
1. Coating Weight Grades (AS80 / AS120 / AS150)
| Grau de revestimento | Peso do revestimento (g/m²) | Desempenho típico |
|---|---|---|
| AS80 | ~80 g/m² | Light-duty corrosion protection, Sistemas HVAC |
| AS120 | ~120 g/m² | Standard automotive exhaust and industrial piping |
| AS150 | ~150 g/m² | Heavy-duty high-temperature and aggressive environments |
Higher coating weight improves corrosion resistance but may slightly reduce formability in tight bending applications.
2. Key Quality Indicators for Buyers
| Indicator | Requirement |
|---|---|
| Coating Uniformity | No visible bare spots or uneven thickness |
| Adhesion Strength | No peeling under bending or impact deformation |
| Condição da superfície | Smooth Al-Si layer with minimal pinholes or rough particles |
| Resistência ao Calor | Stable performance at 600–800°C operating conditions |
A consistent coating layer is essential for long-term durability in thermal cycling environments.
3. Espessura do revestimento & Métodos de teste
| Test Method | Propósito |
|---|---|
| Magnetic Thickness Gauge | Non-destructive measurement of coating thickness |
| Metallographic Analysis | Cross-section observation of coating layers and diffusion zone |
| Weight Method (Gravimetric) | Determines coating mass per unit area (AS grade verification) |
| Salt Spray Test | Accelerated corrosion resistance evaluation |
These methods ensure compliance with industrial and automotive quality standards.
4. Mechanical & Forming Performance Tests
| Test Type | Evaluation Purpose |
|---|---|
| Bending Test | Evaluates coating adhesion under deformation (no cracking or peeling) |
| Flanging Test | Assesses edge formability for exhaust system fabrication |
| Impact Test | Checks coating integrity under mechanical stress |
Good aluminized pipe should maintain coating integrity even after severe forming operations.
5. Common Defects in Poor-Quality Products
| Defect | Risk |
|---|---|
| Pinholes | Local corrosion initiation points |
| Uneven coating thickness | Reduced lifespan in weak zones |
| Peeling or flaking | Loss of thermal and corrosion protection |
| Brittle intermetallic layer | Cracking during bending or installation |
6. Application Overview
| Indústria | Aplicativo |
|---|---|
| Automotivo | Tubos de escape, silenciadores, catalytic systems |
| Aquecimento Industrial | Furnace and high-temperature gas pipelines |
| Sistemas HVAC | Ventilation and thermal ducting |
| Energy Systems | Flue gas and heat recovery lines |
7. Por que os compradores escolhem Teda Ganghua
No Teda Ganghua, we supply hot dipped aluminized steel pipes with controlled AS coating grades (AS80–AS150), stable adhesion performance, e padrões rigorosos de inspeção para aplicações industriais.
Fornecemos processamento OEM, corte, flexão, e serviços completos de embalagem de exportação para clientes globais.
Explore nossos produtos de tubos de aço aluminizado aqui:
Produtos de tubo de aço aluminizado
Conclusão
A qualidade do tubo de aço aluminizado por imersão a quente é determinada pelo peso do revestimento, força de adesão, e integridade estrutural. Inspeção adequada através da medição de espessura, metalografia, e testes de flexão garantem desempenho confiável em ambientes industriais exigentes.



















