พิมพ์ 1 ท่อเหล็กอลูมิไนซ์

คำอธิบาย

พิมพ์ 1 Aluminized Steel Tube at a Glance: Grade Chart, ASTM A463 Specs & Typical Order Parameters

พิมพ์ 1 ท่อเหล็กอลูมิไนซ์ is an Al-Si (typically ~10% silicon) hot-dip coated steel tube designed for high-temperature and corrosion-resistant service. It is commonly specified under ประเภท ASTM A463 1 and widely used in automotive exhaust systems, เครื่องแลกเปลี่ยนความร้อน, and industrial thermal piping.

This guide provides a quick technical reference including dimensions, coating weights, and standard ordering parameters for buyers and engineers.

1. ประเภท ASTM A463 1 ภาพรวม

รายการข้อมูลจำเพาะ
มาตรฐานASTM A463
ประเภทการเคลือบพิมพ์ 1 (Aluminum-Silicon alloy ~Al-10%Si)
วัสดุฐานCold-rolled or hot-rolled carbon steel strip
คุณสมบัติหลักHigh-temperature oxidation resistance up to ~800°C
Primary Applicationระบบไอเสียรถยนต์, เครื่องแลกเปลี่ยนความร้อน, furnace ducts

2. พิมพ์ 1 Tube Size Quick Reference (OD × Wall Thickness)

เส้นผ่านศูนย์กลางภายนอก (ของ)ความหนาของผนังTypical Application
19 มม. – 25 มม1.0 - 1.5 มมSmall exhaust connectors, sensor tubing
25 มม. – 38 มม1.2 - 2.0 มมPassenger vehicle exhaust pipes
38 มม. – 63 มม1.5 - 2.5 มมMain exhaust systems, resonators
63 มม. – 114 มม2.0 - 3.0 มมHeavy-duty exhaust and industrial piping

3. มวลการเคลือบ (GSM / AS Grade Reference)

เกรดการเคลือบมวลการเคลือบ (Typical)Performance Level
AS8080 g/m²Standard corrosion protection
AS120120 g/m²Balanced durability for automotive use
AS150150 g/m²High corrosion & thermal resistance

Higher coating mass improves oxidation resistance but may slightly reduce forming flexibility depending on application.

4. Key Mechanical & Performance Characteristics

คุณสมบัติพิมพ์ 1 Aluminized Tube Behavior
ทนต่ออุณหภูมิสูงStable up to ~800°C
ความสามารถในการขึ้นรูปGood for bending and forming operations
ความสามารถในการเชื่อมGood with controlled coating burn-off
ความต้านทานต่อการเกิดออกซิเดชันExcellent Al₂O₃ protective film formation

5. Typical Order Parameter Checklist

ParameterBuyer Requirement Example
มาตรฐานประเภท ASTM A463 1
Outer diameter (ของ)25 มม / 38 มม / custom
Wall thickness1.2 มม. – 3.0 มม
มวลสารเคลือบAS80 / AS120 / AS150
ความยาว6 ม. / 12 ม. / ตัดตามความยาว
End conditionPlain / beveled / threaded (if required)
Surface requirementAs-coated / post-processed / bent-ready

6. Common Application Fields

อุตสาหกรรมแอปพลิเคชัน
เกี่ยวกับยานยนต์ท่อไอเสีย, catalytic systems, resonators
Energy Systemsเครื่องแลกเปลี่ยนความร้อน, flue gas pipelines
อุปกรณ์อุตสาหกรรมHigh-temperature ventilation ducts
OEM ManufacturingCustom bent aluminized tubing assemblies

7. ทำไมผู้ซื้อถึงเลือก Teda Ganghua

ที่ เทดา กังฮวา, we supply ASTM A463 Type 1 ท่อเหล็กอลูมิไนซ์พร้อมเคมีเคลือบ Al-Si ที่ควบคุม, ความอดทนของมิติที่มั่นคง, และความหนาเคลือบสม่ำเสมอ เหมาะสำหรับงานทนความร้อนในยานยนต์และอุตสาหกรรม.

เราสนับสนุนการตัด OEM, การเตรียมการดัด, และบรรจุภัณฑ์พร้อมส่งออกสำหรับผู้ผลิตระบบไอเสียและผู้จัดจำหน่ายท่ออุตสาหกรรมระดับโลก.

สำรวจผลิตภัณฑ์ท่อเหล็กอลูมิไนซ์ของเราที่นี่:
ผลิตภัณฑ์ท่อเหล็กอลูมิไนซ์

บทสรุป

พิมพ์ 1 ท่อเหล็กอลูมิไนซ์มีการผสมผสานที่สมดุลระหว่างความต้านทานต่ออุณหภูมิสูง, การป้องกันการกัดกร่อน, และความสามารถในการผลิต. ด้วยข้อกำหนดมาตรฐาน ASTM A463 และตัวเลือกการเคลือบที่ยืดหยุ่น, โดยยังคงเป็นวัสดุหลักสำหรับไอเสียรถยนต์และระบบระบายความร้อนทางอุตสาหกรรมทั่วโลก.

ท่อเหล็กเคลือบอลูมิเนียม

ท่อเหล็กอลูมิไนซ์