1.0306 或者 1.0952? DX54D 物料编号转换说明

1.0306 或者 1.0952? DX54D 物料编号转换说明

1.0306 或者 1.0952? 适用于DX54D, 两个数字都可以是正确的, but they belong to different editions of the European standard. The apparent conflict is mainly a material-number transition, not a change from one steel grade to another. Historical editions used 1.0306, while EN 10346:2015 identifies DX54D as 1.0952. The grade name remained DX54D. :contentReference[oaicite:0]{index=0}

The practical answer: 1.0306 is the historical material number associated with earlier editions, 尽管 1.0952 is the material number used for DX54D in EN 10346:2015 and later current references. Do not automatically treat them as two different grades.

1. Why Are There Two Material Numbers?

European steel designations contain two different layers of identification that are often mixed together in online material databases: 这 steel name and the material number. 在这种情况下, DX54D is the steel name, 尽管 1.0306 或者 1.0952 is the Werkstoffnummer associated with a particular standard edition.

Historical records show DX54D as 1.0306 under earlier standards, including EN 10142:2000 和 EN 10327:2004. When EN 10346:2009 replaced EN 10327 for continuously hot-dip coated flat products, DX54D was still listed with 1.0306. The subsequent EN 10346:2015 edition identifies DX54D as 1.0952. :contentReference[oaicite:1]{index=1}

Standard generationTypical standard editionDX54D material numberProcurement meaning
Early generation在 10142:20001.0306Historical designation for continuously hot-dip zinc-coated cold-forming steels.
Second generation在 10327:2004 / 在 10346:20091.0306The designation continued during the transition to the broader coated-flat-product standard.
Current generation在 10346:20151.0952Current standardized material number for DX54D in this edition.

2. Generation One: 在 10142 和 1.0306

One of the earliest references encountered in the supply chain is EN 10142, covering continuously hot-dip zinc-coated low-carbon steel strip and sheet for cold forming. Historical material records identify DX54D+Z and DX54D+ZF with material number 1.0306 under EN 10142:2000. :contentReference[oaicite:2]{index=2}

At this stage, the standard framework was more specifically organized around hot-dip zinc-coated products. The designation therefore frequently appears in older drawings, certificates and archived purchasing documents together with zinc-coating suffixes such as +Z 或者 +ZF.

This is one reason older documents can show DX54D 1.0306 without indicating that the material is obsolete as a physical steel. The number reflects the standard system under which the material was specified at the time.

3. Generation Two: 在 10327 and the Wider Coating System

在 10327:2004 expanded the framework for continuously hot-dip coated strip and sheet of low-carbon steels for cold forming. The historical database record shows that EN 10327:2004 subsequently gave way to EN 10346:2009. DX54D remained associated with 1.0306 during this stage. :contentReference[oaicite:3]{index=3}

This period is especially important when reviewing older technical documents because the same DX54D designation can appear with different coating suffixes. Historical references list coating systems including zinc, zinc-iron, zinc-aluminium, aluminium-zinc and aluminium-silicon depending on the applicable specification. :contentReference[oaicite:4]{index=4}

Key point: the change from EN 10327 to EN 10346 should not be interpreted as a change from DX54D to another forming grade. It was primarily a change in the standard framework for continuously hot-dip coated flat products.

4. Generation Three: 在 10346 and the Move to 1.0952

在 10346:2009 replaced EN 10327 as the relevant European standard for continuously hot-dip coated steel flat products. 然而, the material record for the 2009 edition still lists DX54D as 1.0306. :contentReference[oaicite:5]{索引=5}

The significant material-number change appears with 在 10346:2015. 这 2015 edition lists DX54D as 1.0952 and records that this edition superseded EN 10346:2009. :contentReference[oaicite:6]{index=6}

This gives procurement teams an important timeline: 1.0306 did not suddenly become a different grade called 1.0952. 反而, the standardized material number associated with the DX54D steel name was revised in the later edition of the standard.

5. 所以, 是 1.0306 the Same as 1.0952?

For historical identification, they are closely linked to the same DX54D grade designation, but they should not be treated as interchangeable numbers without checking the referenced standard edition.

A certificate stating DX54D / 1.0306 / 在 10346:2009 is not necessarily inconsistent simply because a current database lists DX54D / 1.0952 / 在 10346:2015. The standard edition is the missing piece of information that explains the different material number. :contentReference[oaicite:7]{index=7}

Document saysHow to interpret it
DX54D / 1.0306 / 在 10142Historical specification; check the original coating and delivery requirements.
DX54D / 1.0306 / 在 10327Historical coated-flat-steel specification under the earlier generation.
DX54D / 1.0306 / 在 10346:2009Valid identification within the 2009 edition.
DX54D / 1.0952 / 在 10346:2015Later standardized material-number designation.

6. What About DX54D+AS?

The same historical transition applies when the material is specified with an aluminium-silicon coating. 这 +作为 suffix identifies the coating system, while DX54D identifies the underlying cold-forming steel grade.

Historical material records list DX54D+AS among the coating variants associated with the earlier 1.0306 指定. Current EN 10346 references identify DX54D as 1.0952 and also list +AS among the available coating types. :contentReference[oaicite:8]{index=8}

所以, a document reading DX54D+AS 1.0306 should first be examined for its standard edition rather than being rejected simply because a newer database shows DX54D+AS 1.0952.

7. The Mechanical Properties Did Not Simply “Change Because the Number Changed”

Another common misunderstanding is to assume that changing the material number automatically means that the steel has acquired completely different mechanical properties.

References for DX54D under the EN 10346 framework give a tensile-strength range around 260–350 MPa and a yield-strength range around 120–220 MPa, with elongation requirements depending on the applicable product and coating specification. :contentReference[oaicite:9]{index=9}

The correct engineering approach is therefore to compare the complete standard edition, chemical requirements, 机械要求, coating designation and delivery condition, rather than comparing 1.0306 和 1.0952 as though they were two unrelated commercial grades.

8. Why Tube Buyers Need to Be Especially Careful

DX54D is defined within the coated flat-product standard framework. If a manufacturer subsequently forms the coated strip into tubing, the material number alone does not become a complete tube specification.

For a tube order, buyers should separately define:

  • substrate grade and applicable standard edition;
  • coating designation and coating mass;
  • outside diameter or section geometry;
  • wall thickness and tolerance;
  • 管长;
  • 成型和焊接要求;
  • 表面状况;
  • inspection and testing requirements.

This distinction becomes particularly important for DX54D+AS-based tube applications. The flat steel designation identifies the starting material, while the finished tube requires its own dimensional and manufacturing requirements.

9. Teda Ganghua Support for Coated Steel Tube Procurement

For buyers sourcing coated steel tubes, Teda Ganghua can help connect the material designation with the finished application. Instead of treating a material number such as 1.0306 或者 1.0952 as the entire tube specification, the inquiry can define the substrate, 涂层, 管尺寸, forming requirements and intended service conditions together.

For applications requiring 渗铝钢管, procurement teams can provide the required outside diameter, 壁厚, 长度, coating requirement and application conditions. This makes it easier to determine whether the requested material designation refers to a historical certificate, a current standard designation or the actual finished-tube requirement.

Recommended inquiry wording: “DX54D, current applicable EN 10346 edition, +AS coating, with finished tube dimensions and inspection requirements specified separately.” If an older drawing requires 1.0306, include the original standard edition for traceability.

10. Final Answer: 1.0306 或者 1.0952?

Both can be correct, depending on the standard edition.

1.0306 is the historical material number associated with DX54D in earlier standards and remained in use in EN 10346:2009. 1.0952 is the material number identified for DX54D in EN 10346:2015. :contentReference[oaicite:10]{index=10}

For a current purchasing specification, do not replace 1.0952 和 1.0306 simply because an old certificate or drawing uses the older number. Conversely, do not reject an older certificate solely because it contains 1.0306. First identify the standard edition, then compare the complete technical requirements.

The safest rule is therefore: DX54D tells you the steel grade; the material number tells you which standard-generation identification you are looking at. When 1.0306 和 1.0952 appear in the same supply chain, the standard edition is the key to resolving the apparent contradiction.

常问问题

是 1.0306 an obsolete grade?

未必. It is a historical material number used for DX54D under earlier standard editions. Its presence on an older certificate should be interpreted together with the referenced standard and revision.

是 1.0952 the newer number for DX54D?

是的. 在 10346:2015 identifies DX54D as 1.0952, while earlier EN 10346:2009 documentation identifies it as 1.0306. :contentReference[oaicite:11]{index=11}

Does DX54D+AS also have the 1.0306 到 1.0952 transition?

是的. The material-number transition applies to the DX54D substrate designation, while +AS identifies the aluminium-silicon coating system.

Should a new purchase order use 1.0306 或者 1.0952?

For a current specification, reference the applicable current standard edition and its material number. If the project drawing or customer specification requires the historical designation, preserve that designation together with its original standard edition for traceability.

分享这篇文章