Tubo in acciaio alluminato a caldo
- Descrizione
Descrizione
Tubo in acciaio alluminato a caldo: Quality Indicators, Spessore del rivestimento & Inspection Methods
Hot dipped aluminized steel pipe is a corrosion- and heat-resistant steel product coated by immersing carbon steel into a molten aluminum or aluminum-silicon bath. Its performance is highly dependent on coating weight, adhesion quality, and metallurgical structure.
For industrial buyers, especially in automotive exhaust, scambio termico, and furnace systems, understanding coating grade and inspection methods is critical for ensuring long-term reliability.
1. Coating Weight Grades (AS80 / AS120 / AS150)
| Grado di rivestimento | Peso del rivestimento (g/m²) | Prestazioni tipiche |
|---|---|---|
| AS80 | ~80 g/m² | Light-duty corrosion protection, Sistemi HVAC |
| AS120 | ~120 g/m² | Standard automotive exhaust and industrial piping |
| AS150 | ~150 g/m² | Heavy-duty high-temperature and aggressive environments |
Higher coating weight improves corrosion resistance but may slightly reduce formability in tight bending applications.
2. Key Quality Indicators for Buyers
| Indicator | Requirement |
|---|---|
| Coating Uniformity | No visible bare spots or uneven thickness |
| Adhesion Strength | No peeling under bending or impact deformation |
| Condizione della superficie | Smooth Al-Si layer with minimal pinholes or rough particles |
| Resistenza al calore | Stable performance at 600–800°C operating conditions |
A consistent coating layer is essential for long-term durability in thermal cycling environments.
3. Spessore del rivestimento & Metodi di prova
| Test Method | Scopo |
|---|---|
| Magnetic Thickness Gauge | Non-destructive measurement of coating thickness |
| Metallographic Analysis | Cross-section observation of coating layers and diffusion zone |
| Weight Method (Gravimetric) | Determines coating mass per unit area (AS grade verification) |
| Salt Spray Test | Accelerated corrosion resistance evaluation |
These methods ensure compliance with industrial and automotive quality standards.
4. Mechanical & Forming Performance Tests
| Test Type | Evaluation Purpose |
|---|---|
| Bending Test | Evaluates coating adhesion under deformation (no cracking or peeling) |
| Flanging Test | Assesses edge formability for exhaust system fabrication |
| Impact Test | Checks coating integrity under mechanical stress |
Good aluminized pipe should maintain coating integrity even after severe forming operations.
5. Common Defects in Poor-Quality Products
| Defect | Risk |
|---|---|
| Pinholes | Local corrosion initiation points |
| Uneven coating thickness | Reduced lifespan in weak zones |
| Peeling or flaking | Loss of thermal and corrosion protection |
| Brittle intermetallic layer | Cracking during bending or installation |
6. Application Overview
| Industria | Applicazione |
|---|---|
| Automobilistico | Tubi di scarico, silenziatori, catalytic systems |
| Riscaldamento industriale | Furnace and high-temperature gas pipelines |
| Sistemi HVAC | Ventilation and thermal ducting |
| Energy Systems | Flue gas and heat recovery lines |
7. Perché gli acquirenti scelgono Teda Ganghua
A Teda Ganghua, we supply hot dipped aluminized steel pipes with controlled AS coating grades (AS80–AS150), stable adhesion performance, e rigorosi standard di ispezione per le applicazioni industriali.
Forniamo l'elaborazione OEM, taglio, flessione, e servizi completi di imballaggio per l'esportazione per clienti globali.
Esplora i nostri prodotti in tubi di acciaio alluminato qui:
Prodotti in tubi di acciaio alluminato
Conclusione
La qualità del tubo in acciaio alluminato a caldo è determinata dal peso del rivestimento, forza di adesione, e integrità strutturale. Ispezione corretta tramite misurazione dello spessore, metallografia, e i test di flessione garantiscono prestazioni affidabili in ambienti industriali esigenti.



















